Rusty MUT
-
@Lynn LeFey said:
@Taxi Dad said:
i had an egg in my pocket, for reasons nobody needs to kno !
At the risk of digression, I disagree. I believe when you make a statement about carrying a (presumably) raw egg in your pocket, it begs explanation. We're waiting. :D
...+1
Smurf the digression, interested parties want to know. :D
-
Water, salts, salt water, very corrosive. About the worst I've seen is ammonium nitrate dust. I've seen it eat the chrome off a bumper overnight.
-
Must be that the newer steel formula in Leatherman tools is allergic to your climate conditions. Know that their older steel was far better than this newer stuff they have been using.
The formula of the steel reacts different in various climates. Here in Idaho, no where near sea water, have only had rust spots on tools that have rarely been used & oiled. Shelf items of many years or decades have a few rust spots when I go over them every so often. These are stored in a more dry climate, 30% humidity.
I carry multitools in leather sheaths. Despite what other have claimed, I have never had a tool rust in a leather sheath, but have seen rust spots in nylon sheaths. Maybe due to spider pee or something? I dunno.
Of my users they don't get time to rust. Am always cleaning them. Perhaps being a larger man my body heat dissipates any accumulation of moisture. If that is the case, you should eat more, build some muscle, and burn more calories you skinny type person. <in a Monty Python accent> :D
-
@Taxi Dad said:
i have read some comments about wingman rust but not had a problem so far
almost two weeks ago i ran mine under a kitchen tap (i had an egg in my pocket, for reasons nobody needs to kno ! and it got broken all over the wingman
) i let it dry overnight and put it back in my coat . no rust :D (yet)/mourns at your 'chicken pocket pie' idea
-
I haven't seen any rust on my XTi, although its been cerakoted black. But this makes me wonder. If the Swiss tool doesn't rust, I may have to rethink my position on LM quality. Guess I'll have to buy that road tour and a black spirt to find out ;)
-
@Lynn LeFey said:
@Taxi Dad said:
i had an egg in my pocket, for reasons nobody needs to kno !
At the risk of digression, I disagree. I believe when you make a statement about carrying a (presumably) raw egg in your pocket, it begs explanation. We're waiting. :D
...+1
Smurf the digression, interested parties want to know. :D
what a nosey lot you are !

I don't want to get far off Grants topic and it's probably NOT as exciting as you think, so lets put this to bed. My days of 'Egging' the neighbours houses are well and truly over BTW.
being something of a 'soft touch' i have taken pitty on an 'urban fox' (yes some folks think they are just vermin) I walk my dog late at night , just before bed time, and have noticed this one beast had an injured front leg. I think it's been shoot , probably with an air rifle which wouldn't be powerful enough to 'kill' the poor thing. now 'I' don't want to get into the hunting debate, nor the one about foxes. we do have a 'fox problem' in this area ! it's not unusual to see half a dozen or MORE on my short walk :o i'm not sure how to cure the problem, but wounding them and letting them suffer is not the answer ! >:(
the RSPCA and so called 'wildlife rescue' people are NOT interested BTW.
hopefully i can gain the animals trust enough to catch it if it doesn't improve in the meantime. if not i figure at least it hasn't got to forage for as much food and may rest up a bit aiding its recovery.
YES I KNOW I'M STUPID ! (i'm beyond help)
- the Egg and some other 'scraps' were in my pocket so people didn't see me feeding the 'vermin' ,i don't want to get into rows with neighbours about me encouraging them, or people thinking I'm poisoning them. there is a lot of strong views about them that is why suspect someone has been shooting.
p.s. Yes i HAVE learned my leason about putting raw eggs in my pocket

sadly i did think it wasn't so smart as i loaded up, and then again while bending down to clear up after the dog !!! no good deed goes unpunished (specially when you're an idiot) -
@Taxi Dad said:
@Lynn LeFey said:
@Taxi Dad said:
i had an egg in my pocket, for reasons nobody needs to kno !
At the risk of digression, I disagree. I believe when you make a statement about carrying a (presumably) raw egg in your pocket, it begs explanation. We're waiting. :D
...+1
Smurf the digression, interested parties want to know. :D
what a nosey lot you are !

I don't want to get far off Grants topic and it's probably NOT as exciting as you think, so lets put this to bed. My days of 'Egging' the neighbours houses are well and truly over BTW.
being something of a 'soft touch' i have taken pitty on an 'urban fox' (yes some folks think they are just vermin) I walk my dog late at night , just before bed time, and have noticed this one beast had an injured front leg. I think it's been shoot , probably with an air rifle which wouldn't be powerful enough to 'kill' the poor thing. now 'I' don't want to get into the hunting debate, nor the one about foxes. we do have a 'fox problem' in this area ! it's not unusual to see half a dozen or MORE on my short walk :o i'm not sure how to cure the problem, but wounding them and letting them suffer is not the answer ! >:(
the RSPCA and so called 'wildlife rescue' people are NOT interested BTW.
hopefully i can gain the animals trust enough to catch it if it doesn't improve in the meantime. if not i figure at least it hasn't got to forage for as much food and may rest up a bit aiding its recovery.
YES I KNOW I'M STUPID ! (i'm beyond help)
- the Egg and some other 'scraps' were in my pocket so people didn't see me feeding the 'vermin' ,i don't want to get into rows with neighbours about me encouraging them, or people thinking I'm poisoning them. there is a lot of strong views about them that is why suspect someone has been shooting.
p.s. Yes i HAVE learned my leason about putting raw eggs in my pocket

sadly i did think it wasn't so smart as i loaded up, and then again while bending down to clear up after the dog !!! no good deed goes unpunished (specially when you're an idiot)No worries mate. Good to know there are others that care about another living being, regardless what others think. Haven't seen a fox for 20+ years. Haven't seen nor heard a frog for that matter past a pet shop, or since I was in my 20's. Anyhow, good on you for that. You ol' softy you.
:D -
I'm considering doing an experiment to see what I have to do to make one form some rust. Like put it in a salt water bath for a week or something.
If you want to see rust grab a wingman get it wet and leave it wet and you'll see rust. Not submerged in water, but put away wet. Iron oxide needs oxygen to form after all. Little droplets of water will do it nicely. And if you have a damp basement that will help :D Also if youve already oiled the tool liberally, you'd have to degrease it with dish soap to make sure that oil stuff doesnt ruin the rust experiment.
I still remember this diagram from science class! Salty water or mineral rich water should speed the process as its a better electrolyte.

I left my wingman outside overnight after losing it twice and it never rusted.
-
That is crap. The MUT is a very expensive tool that is marketed for extreme use in extreme conditions and they aren't supposed to rust in the damn sheath. it is kind of irritating that leatherman is making "Premium" tools that are little more than one nice piece of steel surrounded by normal steel. Reminds me of a chair I bought one time. It had a tag on it that said "genuine leather", and it was. But only the tag. The chair was pleather. Some cheap plastic leather knockoff.
I'm starting to lean more and more away from leatherman because of issues like this. My wave hasn't let me down but its black oxide.
Sent from my Galaxy S3 using crapatalk two point oh.
-
I'm considering doing an experiment to see what I have to do to make one form some rust. Like put it in a salt water bath for a week or something.
If you want to see rust grab a wingman get it wet and leave it wet and you'll see rust. Not submerged in water, but put away wet. Iron oxide needs oxygen to form after all. Little droplets of water will do it nicely. And if you have a damp basement that will help :D Also if youve already oiled the tool liberally, you'd have to degrease it with dish soap to make sure that oil stuff doesnt ruin the rust experiment.
I still remember this diagram from science class! Salty water or mineral rich water should speed the process as its a better electrolyte.

I left my wingman outside overnight after losing it twice and it never rusted.
I could just be cursed. :D I have some old juice parts that I just wet down and left on my work bench. Lets see if they rust or survive in a few days.
-
Rust... <u>Ouch</u>
The little bit of rust on my Leatherman Juice and Squirt bugs me when I see it, but being where I can't get at it(behind the clear plastic bits), I just pretend it isn't really there and avoid eye contact, lol... :D -
To be Honest I haven't been impresses with LM build quality Fit and Finish since my first wave.
I also Had no idea until this thread that rust is not covered under warranty.Not sure if its a materials issue, or Lack of QC, or what but I had wanted a MUT, not so sure now.
-
I don't have a MUT - what is the coating they're using, is it BO or some kind of anodise?
-
As much as we all have this desire for our multitools tobe rust free and pretty forever as a trophy wife. But even a trophy wife needs a bit of maintainance. A fine stone, 3-in-1 or WD-40, a bit of fine steel wool, and a rag. And your multitool/loveslave will make you happy in no time

-
I'd agree with you Bryan except that other tools are remarkably unaffected when exposed to the same or worse conditions for longer periods.
Def
Sent from a digital multitool
-
I feel your pain, brother. I constantly battle rust issues with my newer Leathermans. My older ones, with the brushed finish on the tools, such as the Micra, PST, Pulse, and older style Wave are generally rust-free, but the newer bead blasted stuff is an absolute rust magnet. I've purchased BO versions of the Wave and Rebar to test out, but by looking at your MUT, not even the black oxide coating will save the wear areas from rust.
At some point, I may have to take apart my normal Wave, and try putting a polished finish on all of the parts. It may throw the fit out of tolerance though, so I'm loath to do it.
This all makes my Spirit X look better and better for EDC. That polished finish on Victorinox tools makes rust a total non-issue.
-
Yes I am tempted to put my very last eClipse on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.
Def
Sent from a digital multitool
-
@Grant Lamontagne said:
Yes I am tempted to put **my very last eClipse **on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.Def
Sent from a digital multitool
Do you have any updates from the maker of it? Has he found another distributer? I'm saving my last one as well.
-
@Grant Lamontagne said:
Yes I am tempted to put **my very last eClipse **on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.
Def
Sent from a digital multitool
Do you have any updates from the maker of it? Has he found another distributer? I'm saving my last one as well.
Im not familiar with these, are they the best type of stick on one made?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login