Rusty MUT
-
@Taxi Dad said:
@Lynn LeFey said:
@Taxi Dad said:
i had an egg in my pocket, for reasons nobody needs to kno !
At the risk of digression, I disagree. I believe when you make a statement about carrying a (presumably) raw egg in your pocket, it begs explanation. We're waiting. :D
...+1
Smurf the digression, interested parties want to know. :D
what a nosey lot you are !

I don't want to get far off Grants topic and it's probably NOT as exciting as you think, so lets put this to bed. My days of 'Egging' the neighbours houses are well and truly over BTW.
being something of a 'soft touch' i have taken pitty on an 'urban fox' (yes some folks think they are just vermin) I walk my dog late at night , just before bed time, and have noticed this one beast had an injured front leg. I think it's been shoot , probably with an air rifle which wouldn't be powerful enough to 'kill' the poor thing. now 'I' don't want to get into the hunting debate, nor the one about foxes. we do have a 'fox problem' in this area ! it's not unusual to see half a dozen or MORE on my short walk :o i'm not sure how to cure the problem, but wounding them and letting them suffer is not the answer ! >:(
the RSPCA and so called 'wildlife rescue' people are NOT interested BTW.
hopefully i can gain the animals trust enough to catch it if it doesn't improve in the meantime. if not i figure at least it hasn't got to forage for as much food and may rest up a bit aiding its recovery.
YES I KNOW I'M STUPID ! (i'm beyond help)
- the Egg and some other 'scraps' were in my pocket so people didn't see me feeding the 'vermin' ,i don't want to get into rows with neighbours about me encouraging them, or people thinking I'm poisoning them. there is a lot of strong views about them that is why suspect someone has been shooting.
p.s. Yes i HAVE learned my leason about putting raw eggs in my pocket

sadly i did think it wasn't so smart as i loaded up, and then again while bending down to clear up after the dog !!! no good deed goes unpunished (specially when you're an idiot)No worries mate. Good to know there are others that care about another living being, regardless what others think. Haven't seen a fox for 20+ years. Haven't seen nor heard a frog for that matter past a pet shop, or since I was in my 20's. Anyhow, good on you for that. You ol' softy you.
:D -
I'm considering doing an experiment to see what I have to do to make one form some rust. Like put it in a salt water bath for a week or something.
If you want to see rust grab a wingman get it wet and leave it wet and you'll see rust. Not submerged in water, but put away wet. Iron oxide needs oxygen to form after all. Little droplets of water will do it nicely. And if you have a damp basement that will help :D Also if youve already oiled the tool liberally, you'd have to degrease it with dish soap to make sure that oil stuff doesnt ruin the rust experiment.
I still remember this diagram from science class! Salty water or mineral rich water should speed the process as its a better electrolyte.

I left my wingman outside overnight after losing it twice and it never rusted.
-
That is crap. The MUT is a very expensive tool that is marketed for extreme use in extreme conditions and they aren't supposed to rust in the damn sheath. it is kind of irritating that leatherman is making "Premium" tools that are little more than one nice piece of steel surrounded by normal steel. Reminds me of a chair I bought one time. It had a tag on it that said "genuine leather", and it was. But only the tag. The chair was pleather. Some cheap plastic leather knockoff.
I'm starting to lean more and more away from leatherman because of issues like this. My wave hasn't let me down but its black oxide.
Sent from my Galaxy S3 using crapatalk two point oh.
-
I'm considering doing an experiment to see what I have to do to make one form some rust. Like put it in a salt water bath for a week or something.
If you want to see rust grab a wingman get it wet and leave it wet and you'll see rust. Not submerged in water, but put away wet. Iron oxide needs oxygen to form after all. Little droplets of water will do it nicely. And if you have a damp basement that will help :D Also if youve already oiled the tool liberally, you'd have to degrease it with dish soap to make sure that oil stuff doesnt ruin the rust experiment.
I still remember this diagram from science class! Salty water or mineral rich water should speed the process as its a better electrolyte.

I left my wingman outside overnight after losing it twice and it never rusted.
I could just be cursed. :D I have some old juice parts that I just wet down and left on my work bench. Lets see if they rust or survive in a few days.
-
Rust... <u>Ouch</u>
The little bit of rust on my Leatherman Juice and Squirt bugs me when I see it, but being where I can't get at it(behind the clear plastic bits), I just pretend it isn't really there and avoid eye contact, lol... :D -
To be Honest I haven't been impresses with LM build quality Fit and Finish since my first wave.
I also Had no idea until this thread that rust is not covered under warranty.Not sure if its a materials issue, or Lack of QC, or what but I had wanted a MUT, not so sure now.
-
I don't have a MUT - what is the coating they're using, is it BO or some kind of anodise?
-
As much as we all have this desire for our multitools tobe rust free and pretty forever as a trophy wife. But even a trophy wife needs a bit of maintainance. A fine stone, 3-in-1 or WD-40, a bit of fine steel wool, and a rag. And your multitool/loveslave will make you happy in no time

-
I'd agree with you Bryan except that other tools are remarkably unaffected when exposed to the same or worse conditions for longer periods.
Def
Sent from a digital multitool
-
I feel your pain, brother. I constantly battle rust issues with my newer Leathermans. My older ones, with the brushed finish on the tools, such as the Micra, PST, Pulse, and older style Wave are generally rust-free, but the newer bead blasted stuff is an absolute rust magnet. I've purchased BO versions of the Wave and Rebar to test out, but by looking at your MUT, not even the black oxide coating will save the wear areas from rust.
At some point, I may have to take apart my normal Wave, and try putting a polished finish on all of the parts. It may throw the fit out of tolerance though, so I'm loath to do it.
This all makes my Spirit X look better and better for EDC. That polished finish on Victorinox tools makes rust a total non-issue.
-
Yes I am tempted to put my very last eClipse on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.
Def
Sent from a digital multitool
-
@Grant Lamontagne said:
Yes I am tempted to put **my very last eClipse **on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.Def
Sent from a digital multitool
Do you have any updates from the maker of it? Has he found another distributer? I'm saving my last one as well.
-
@Grant Lamontagne said:
Yes I am tempted to put **my very last eClipse **on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.
Def
Sent from a digital multitool
Do you have any updates from the maker of it? Has he found another distributer? I'm saving my last one as well.
Im not familiar with these, are they the best type of stick on one made?
-
@Grant Lamontagne said:
Yes I am tempted to put **my very last eClipse **on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.
Def
Sent from a digital multitool
Do you have any updates from the maker of it? Has he found another distributer? I'm saving my last one as well.
Im not familiar with these, are they the best type of stick on one made?
Google Nite Ize eClipse. It's a self locking clip that uses the 3m VHB tape to attach. (http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Products/~/Industrial-Adhesives-Tapes/Double-Sided-Bonding-Tapes/VHB-Tape?N=5485815&rt=c3). Very good low riding clip. I just wish there was also a smaller model of it. Grant said after the last years Shot Show the maker wasn't making them for Nite Ize anymore and was searching for other distributors.
-
@Grant Lamontagne said:
Yes I am tempted to put **my very last eClipse **on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.
Def
Sent from a digital multitool
Do you have any updates from the maker of it? Has he found another distributer? I'm saving my last one as well.
I haven't heard a thing.
Def
Sent from my Motorola Atrix digital multitool.
-
Looks like Wootz found him
-
@Grant Lamontagne said:
I'd agree with you Bryan except that other tools are remarkably unaffected when exposed to the same or worse conditions for longer periods.Def
Sent from a digital multitool
I'm hip! Two summers ago, I swam at the shores of Cape May. I had an Emerson CQC-9 clipped in the pocket of my swim trunks. You'd think that the Emerson CQC-9, being designed by the british SBS,and the Emerson line being popular with the SEALs, they would be a bit impervious to salt water.
SURPRISE!! The CQC-9's blade was covered in rust after I stepped out of the water!!A wee bit disappointing for a $300 knife

-
I can imagine! i know I'd be pretty upset if I were you!
Since I had the camera stuff out for the CRKT KERT (aka Ring Tool) I decided to snap a few more pics for this thread too. Here's a shot of the MUT:
As you can see, it's nothing too serious, but it bothers me because this tool has only been carried/used fairly lightly. What if this was my actual every day tool? What if I used this thing heavily and often? What if it had actually ridden in my work vest rather than it's sheath under my coat? How bad would it look then?
By way of comparison, here are some shots I just took of the CRKT Tool, which has been exposed, on my vest, outside, pretty much since the Wingman Incident in June. You'll notice if you look closely that the CRKT Tool is actually still wet from being in my vest all day yesterday in the heavy wind and driving rain.
The stuff you see in the corners of the screwdriver, inside the frame and along the spine of the saw is just crud, not rust, however, even if it was rust, it would still have held up a lot better than the Wingman!
I don't know- I don't want to crap on Leatherman because they do make a good product, but for me, for my line of work, I think I'm going to have to relegate them to indoor tools and shelf queens.
Def
-
Wow, big
to CRKT! The environment you work in is definitely not friendly at times, and it's nice to see something hold up to it so well.
Leatherman 
Hope more Leatherman reps start paying attention to these sorts of things before they go the way of BlackBerry!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login