Rusty MUT
-
I don't have a MUT - what is the coating they're using, is it BO or some kind of anodise?
-
As much as we all have this desire for our multitools tobe rust free and pretty forever as a trophy wife. But even a trophy wife needs a bit of maintainance. A fine stone, 3-in-1 or WD-40, a bit of fine steel wool, and a rag. And your multitool/loveslave will make you happy in no time

-
I'd agree with you Bryan except that other tools are remarkably unaffected when exposed to the same or worse conditions for longer periods.
Def
Sent from a digital multitool
-
I feel your pain, brother. I constantly battle rust issues with my newer Leathermans. My older ones, with the brushed finish on the tools, such as the Micra, PST, Pulse, and older style Wave are generally rust-free, but the newer bead blasted stuff is an absolute rust magnet. I've purchased BO versions of the Wave and Rebar to test out, but by looking at your MUT, not even the black oxide coating will save the wear areas from rust.
At some point, I may have to take apart my normal Wave, and try putting a polished finish on all of the parts. It may throw the fit out of tolerance though, so I'm loath to do it.
This all makes my Spirit X look better and better for EDC. That polished finish on Victorinox tools makes rust a total non-issue.
-
Yes I am tempted to put my very last eClipse on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.
Def
Sent from a digital multitool
-
@Grant Lamontagne said:
Yes I am tempted to put **my very last eClipse **on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.Def
Sent from a digital multitool
Do you have any updates from the maker of it? Has he found another distributer? I'm saving my last one as well.
-
@Grant Lamontagne said:
Yes I am tempted to put **my very last eClipse **on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.
Def
Sent from a digital multitool
Do you have any updates from the maker of it? Has he found another distributer? I'm saving my last one as well.
Im not familiar with these, are they the best type of stick on one made?
-
@Grant Lamontagne said:
Yes I am tempted to put **my very last eClipse **on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.
Def
Sent from a digital multitool
Do you have any updates from the maker of it? Has he found another distributer? I'm saving my last one as well.
Im not familiar with these, are they the best type of stick on one made?
Google Nite Ize eClipse. It's a self locking clip that uses the 3m VHB tape to attach. (http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Products/~/Industrial-Adhesives-Tapes/Double-Sided-Bonding-Tapes/VHB-Tape?N=5485815&rt=c3). Very good low riding clip. I just wish there was also a smaller model of it. Grant said after the last years Shot Show the maker wasn't making them for Nite Ize anymore and was searching for other distributors.
-
@Grant Lamontagne said:
Yes I am tempted to put **my very last eClipse **on a Spirit and call it a day. I have a Spirit modded with a pocket clip, but I'd hate to lose or break it at work.
Def
Sent from a digital multitool
Do you have any updates from the maker of it? Has he found another distributer? I'm saving my last one as well.
I haven't heard a thing.
Def
Sent from my Motorola Atrix digital multitool.
-
Looks like Wootz found him
-
@Grant Lamontagne said:
I'd agree with you Bryan except that other tools are remarkably unaffected when exposed to the same or worse conditions for longer periods.Def
Sent from a digital multitool
I'm hip! Two summers ago, I swam at the shores of Cape May. I had an Emerson CQC-9 clipped in the pocket of my swim trunks. You'd think that the Emerson CQC-9, being designed by the british SBS,and the Emerson line being popular with the SEALs, they would be a bit impervious to salt water.
SURPRISE!! The CQC-9's blade was covered in rust after I stepped out of the water!!A wee bit disappointing for a $300 knife

-
I can imagine! i know I'd be pretty upset if I were you!
Since I had the camera stuff out for the CRKT KERT (aka Ring Tool) I decided to snap a few more pics for this thread too. Here's a shot of the MUT:
As you can see, it's nothing too serious, but it bothers me because this tool has only been carried/used fairly lightly. What if this was my actual every day tool? What if I used this thing heavily and often? What if it had actually ridden in my work vest rather than it's sheath under my coat? How bad would it look then?
By way of comparison, here are some shots I just took of the CRKT Tool, which has been exposed, on my vest, outside, pretty much since the Wingman Incident in June. You'll notice if you look closely that the CRKT Tool is actually still wet from being in my vest all day yesterday in the heavy wind and driving rain.
The stuff you see in the corners of the screwdriver, inside the frame and along the spine of the saw is just crud, not rust, however, even if it was rust, it would still have held up a lot better than the Wingman!
I don't know- I don't want to crap on Leatherman because they do make a good product, but for me, for my line of work, I think I'm going to have to relegate them to indoor tools and shelf queens.
Def
-
Wow, big
to CRKT! The environment you work in is definitely not friendly at times, and it's nice to see something hold up to it so well.
Leatherman 
Hope more Leatherman reps start paying attention to these sorts of things before they go the way of BlackBerry! -
I believe that the proper response to is "Oh Snap!"
Def
Sent from my Motorola Atrix digital multitool.
-
@Grant Lamontagne said:
I can imagine! i know I'd be pretty upset if I were you!Ironically, One knife that took a salt water dip,and held up well, was the Spyderco Delica :o It had tiny rust spots all over. And the bulk of them were on the clip spring. Even then, it was light surface rust. and the bulk almost all the spots just rubbed off.

BTW, I was able to clean the CQC-9 when I got home. Took a hour with WD-40 and fine steel wool. All new and pretty again

-
I give all my stuff a wipedown with Marine Tuff Cloth , never had any issues in either fresh or salt water . ( Supposed to be used by the Seals - or so the packaging claims ) .
Chris
-
Heard that polishing can help guard against rust, am not sure on that though.
But if the metal is rusting on the parts you can see, what about in the places you <u>cannot</u> see? The pliers joint will no doubt remove rust when used, but in between handles, the pins, ect...

Now I wonder, how do your SAK(s) hold up at work, or do you carry any?
-
I usually also carry a Victorinox Compact. I have no current pictures of it but it's rust free as well.
Def
-
I think if I needed a Multi for use around salt water , it would be a Clipdraw equipped Spirit , I'd just clip a Spyderco Salt in another pocket . I've never had a problem , did a lot of flyfishing around both fresh and salt . Freshwater rinsing is just part of the end of the day routine .
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login