Spirit owners club
-
The Clip Draw looks nice to me, not cheap, but it comes at least with extra strips. :D
I wish it was more low riding..I agree. To get exactly what I want, I think I'm either going to have to grind down the HipClip, or tap a low ride clip to fit onto the ClipDraw base.
--
sent via carrier pigeon from my secret hideout -
I got the ClipDraw today, but I think it's better suited to maybe my Rebar.
So I thinned out the HipClip on a belt sander, gave it a good hand wet/dry sanding to remove the NiteIze logo and the burrs, and used an adhesive strip from the ClipDraw to mount it. I'm quite happy. Nice deep pocket carry. It even makes the tool feel less slippery.



--
sent via carrier pigeon from my secret hideout -
@Buzzbait said:
I got the ClipDraw today, but I think it's better suited to maybe my Rebar.So I thinned out the HipClip on a belt sander, gave it a good hand wet/dry sanding to remove the NiteIze logo and the burrs, and used an adhesive strip from the ClipDraw to mount it. I'm quite happy. Nice deep pocket carry. It even makes the tool feel less slippery.



--
sent via carrier pigeon from my secret hideoutI Really like the look of the new formed hip clip! Nice work!!
-
Looks perfect! Nice job

-
very nice job mate.

-
ABOUT THE CLIPDRAW...
The following is a public service announcementThis is my personal experience and yours may vary, but here goes. The front screw hole on the clipdraw does not have enough metal surrounding it to bear repeated flexing without failing. I used it maybe 15 times for actual carry. Perhaps mine wasn't heat treated correctly. Clipdraw said they would replace it but I never heard from them again. I would definitely stick with the hipclip instead.

-
:o
-
Thanks for the warning .
Chris
-
Modded Clipdraw for the win

That's about the nicest looking solution I have seen yet

-
Buzzbait, that Hipclip mod is wonderful.
-
I agree, nice job on the clip
However, I don't think I could put a clip on those beautiful Spirits. I love the smooth, mirror finish. Although it would still have the other side to look at :) -
Update on the HipClip:
Consider it more of a dangler than a real pocket clip. It doesn't clip very tightly to my jeans pocket, in comparison to any of my knives with pocket clips. The HipClip will keep that lump out of the bottom of your pocket, but definitely don't look to it as a means of securing the tool. I can pull down my pants to sit on the john, and the Spirit will slide right off onto the floor. I'm sure the slippery nature of the Spirit doesn't help, but it's not all the Spirit's fault. The clip just isn't very tight.
--
sent via carrier pigeon from my secret hideout -
Bummer Buzz :( :(. What if you made the inside of the clip a bit rough to help the clip to grip

-
@Buzzbait said:
Update on the HipClip:Consider it more of a dangler than a real pocket clip. It doesn't clip very tightly to my jeans pocket, in comparison to any of my knives with pocket clips. The HipClip will keep that lump out of the bottom of your pocket, but definitely don't look to it as a means of securing the tool. I can pull down my pants to sit on the john, and the Spirit will slide right off onto the floor. I'm sure the slippery nature of the Spirit doesn't help, but it's not all the Spirit's fault. The clip just isn't very tight.
--
sent via carrier pigeon from my secret hideoutThats why I use this:

-
Here's my Spirit.
Sent from my XT901 using Tapatalk 2




-
How are you getting along with it mate?
-
I've had it since last August, and I'm impressed. I have three main gripes with it.
One--the pliers are too blunt for my liking. Most of the time I've ever used any of my MT pliers, it's been for finer work. The Spirit doesn't do quite as well with that, but the Charge and Rebar do. It's not a huge problem as I don't usually need the pliers frequently enough to matter, but I still prefer Leatherman pliers. I could also carry my new Juice KF4 with it, but that may seem a bit much (I do like to carry 2 or 3 MTs/SAKs though :D).
Although the KF4 also has the diamond file, which leads to my second gripe: the lack of the diamond file. I don't have much to say about that other than I just like to have a diamond file on one side instead of both sides basically being the same thing :P
Third gripe--the Spirit is too dang beautiful and a great achievement in MT engineering that I almost don't want to use it ;). I don't feel that I would ever want to put it to any real hard or dirty use (not that I put any of my MTs to any really hard or dirty work). I'd rather just stare at it

Overall, I really do like the Spirit. Having all the tools accessible without opening it up is a big advantage, and it's not too heavy and bulky for pocket carry imo.
-
I can't believe I'm only joining now.. Well, applying, that is, I already had my Spirit for a month or so :) And it's become the tool I EDC the most :) It just has basically everything I need, plus some extra's! I do sometimes wish I'd have gotten the butterblade version, instead of the spearpoint blade, as I mostly carry a separate SAK or another dedicated blade, so a less-standard blade would maybe be more useful.
Ah well, can't be long before I have that, too, I guess
-
Here's mine. I can't believe I'm in love with this thing :)


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login