Any love for Wenger?
-
@Mud Shrimp Moe said:
@50ft-trad said:
Absolutely :ahhh Good luck with it all, and don't forget to post how you get on

Well, I bought some Lock-Tite last night and redid the scissors screw. The Lock-Tite is less viscous (i.e. more watery) than I had expected and, consequently, I'm not sure how much of it is actually on the the threads. It's more than a bit fiddly to align the scissor blades and get that tiny screw threaded and screwed in with only two hands and a Vic mini screwdriver. But I'm sure at least a tiny amount of Lock-Tite is in there now and am hoping for the best.
If this doesn't hold well, I may try unscrewing it slightly and applying the Lock-Tite from the bottom and then retightening (but not over tightening) the screw. I put the drop of Lock-Tite in the hole before putting in the screw, which is a delicate operation as described above.
Anyway, a boring story for you ... but you asked! ;)
Nice one
I'd allow it twice the cure time it says on the packaging then try it with a screwdriver. At least that way you can have another crack at it by backfilling the hole as you said 


Fly fisherman catch, new.
Nice one - never seen those before

-
@50ft-trad said:
Nice one
I'd allow it twice the cure time it says on the packaging then try it with a screwdriver. At least that way you can have another crack at it by backfilling the hole as you said 
Yep.
The packaging says it sets in 10 min and fully cures in 24 hours. I put it away for about 90 minutes and gently tested it by working the scissors a couple times (couldn't quite resist ... plus I wondered if any Lock-Tite got between the scissor blades and might be a problem). Then I put it up and am not carrying it today. I'll test it with a screwdriver. I don't expect it to feel super-glued in there, but hope it's firm. Thanks for the advice.
-

Portrait Session with my 557 -

Fly fisherman catch, new.
Very nice, congratulations!
I think it is the model also known as Catch and Release.
Too bad that someone used too much the ceramic file.
Nice find

Yes, we have a sakwiki entry for it as Catch and Release. http://www.sakwiki.com/tiki-index.php?page=Catch+and+Release
dks, do you have a model number on the box too. maybe a European identifier number we can add to the wiki?
-
-
polished granite.
-
@dks said:
The Wenger is new.
The file came like that and does not look used.
I assumed it was like that on the side to allow sharpening of hooks etc.
If you think it was used then I may need to discuss it with the sellerI suggest you to discuss, then.
here is a good picture by ICanFixThat, where you can see how the ceramic tool is supposed to be on both sides
http://www.sakwiki.com/tiki-index.php?page=File+-+Ceramic+Diamond+Coated
Perhaps I'm wrong, but that white part from your picture at the end of the file seems to me a sign of use.
I do have a mint "Troller" and I can confirm you that my ceramic tool is exactly the same as the one shown in the link above -


Fly fisherman catch, new.
That really is a great find, I've been looking for one of those for a little while.
While I think the file may not be 100% correct, it looks more like a factory error, or possibly something they did on purpose at one time. It does not look like usage to me from what I can see in the photo.
If you're unhappy, I'll happily accept it as I'm not likely to use that file.
I think the computer system had the name of the knife as "Fly Fisherman Catch & Release", but that was simply too long to print on the label.
-
Enci, the knife was bought from a US seller.
The number given by him was 16956.
Here is the picture of the file given by the seller.
The seller describes the notch as a Fly-tying groove and it was made in 1996.
"Description: This discontinued model was listed in the 1998 Wenger catalogue as the "CATCH AND RELEASE". It has 19 functions including a unique, diamond coated fish hook sharpener with a fly-tying groove..."Maybe a fly fisherman will know.
As I said it looks like an intentional cut in the file rather than a mistake/damage.
-
I like it... definetly looks intentional. Was that an ebay buy-it-now deal I missed?
You scored!

....found it... great deal... looks like I missed it twice
-
I was panic buying some weird wenger knives and was searching for some fishing style ones. The file looked unusual so I got it.
I wish it had a fish graphic on the scales like the other normal ones. -
@ICanFixThat said:
I like it... definetly looks intentional. Was that an ebay buy-it-now deal I missed?You scored!

....found it... great deal... looks like I missed it twice
Same seller both times. Maybe try contacting him, he might have another one he hasn't listed yet.
-
My Orvis Catch and Release (left) has the bright polished notch at the end. The standard Catch and Release has the notch coated with abrasive. The Troller and Angler (right) simply have the hook sharpening groove. So it looks like your uncoated notch isn't a flaw. However I have no idea what its used for.
About half the fishing knives I have have a fly lure on the handle, about half are plain.
-
There are numerous fishing & fly tying knots that require sliding through various loops and the groove helps getting past and through the loops. I used a pair of slightly curved forceps cause am such a noob at knots. There are a few basic knots for tying lures, swivels, and line splicing that the groove really helps.
Preferred forceps as could also cheat and hold the fly body with the eye up and open. Gave a bit more room for the larger loop-throughs. Could lay a backing line down in the forceps too, then wrap a leader around that. The groove was of immerse help.
Back in my fly fishing days, or prior, we didn't have the internet. :D
-
Many thanks!
Here are some better pictures of the file for your reference.



-
Nice pics. Would you like to upload those last 2 to the Wiki's 85mm Wenger Tool gallery, but trim the white space down on the close up, make it narrow like the last one and then it can be included full size on the detail page for this file.
If you like I will trim and upload them for you.
-
I have never put anything on Sakwiki so I will be happy if you do it.
I am attaching 4 pictures without watermarks for your use. There is a blue W on the box after the Wenger name and the cross which I assume was used at the time or denotes a fishing model.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
