Any love for Wenger?
-
@Mud Shrimp Moe said:
I've had my first three Wenger 85mm's for about a week now and have to say I'm underwhelmed...These three were all used models, ...
As has already been mentioned... "There's your problem!"

My new Evo S14 is a great little SAK! It's been my primary pocket carry SAK from the day I got it. F & F are just as good as Vic's IMHO and there are some things I like about the Evo better than the comparable Vics.
I've got an S16, S52, and S557 all on my wish list now.
-
@Heinz Doofenshmirtz said:
As has already been mentioned... "There's your problem!"
My new Evo S14 is a great little SAK! It's been my primary pocket carry SAK from the day I got it. F & F are just as good as Vic's IMHO and there are some things I like about the Evo better than the comparable Vics.
I've got an S16, S52, and S557 all on my wish list now.
You prefer the evo scales over the classic scales then?
-
My first encouter with a Wenger was just as negative. I picked up a used Forrester on ebay and it was awful; bent blade, loose spring action, bent saw etc. Finally I had to pull the whole thing appart and I rebuilt it as a Traveller, much better knife now. I have had no such issues when buying a new Wenger though.

-
I definately give folks the warning light on picking up too many Wengers online at once unless the seller has a good rep for honesty and good descriptions. After handling several from ye old auction site, the conditions have been all over the place. Of special note is the scissors, scissors pivot can be very squirelly (I suppose that could be true for Vics as well). Luckily my key Wengers- a Metal 50, Master, and Galahad Lock have been pretty good. The MB spring in the Master seems to be extra soft though, so it might be going in to the shop.
-
@50ft-trad said:
Absolutely :ahhh Good luck with it all, and don't forget to post how you get on
Well, I bought some Lock-Tite last night and redid the scissors screw. The Lock-Tite is less viscous (i.e. more watery) than I had expected and, consequently, I'm not sure how much of it is actually on the the threads. It's more than a bit fiddly to align the scissor blades and get that tiny screw threaded and screwed in with only two hands and a Vic mini screwdriver. But I'm sure at least a tiny amount of Lock-Tite is in there now and am hoping for the best.
If this doesn't hold well, I may try unscrewing it slightly and applying the Lock-Tite from the bottom and then retightening (but not over tightening) the screw. I put the drop of Lock-Tite in the hole before putting in the screw, which is a delicate operation as described above.
Anyway, a boring story for you ... but you asked! ;)
-



Fly fisherman catch, new.
-
@Mud Shrimp Moe said:
@50ft-trad said:
Absolutely :ahhh Good luck with it all, and don't forget to post how you get on

Well, I bought some Lock-Tite last night and redid the scissors screw. The Lock-Tite is less viscous (i.e. more watery) than I had expected and, consequently, I'm not sure how much of it is actually on the the threads. It's more than a bit fiddly to align the scissor blades and get that tiny screw threaded and screwed in with only two hands and a Vic mini screwdriver. But I'm sure at least a tiny amount of Lock-Tite is in there now and am hoping for the best.
If this doesn't hold well, I may try unscrewing it slightly and applying the Lock-Tite from the bottom and then retightening (but not over tightening) the screw. I put the drop of Lock-Tite in the hole before putting in the screw, which is a delicate operation as described above.
Anyway, a boring story for you ... but you asked! ;)
Nice one
I'd allow it twice the cure time it says on the packaging then try it with a screwdriver. At least that way you can have another crack at it by backfilling the hole as you said 


Fly fisherman catch, new.
Nice one - never seen those before

-
@50ft-trad said:
Nice one
I'd allow it twice the cure time it says on the packaging then try it with a screwdriver. At least that way you can have another crack at it by backfilling the hole as you said 
Yep.
The packaging says it sets in 10 min and fully cures in 24 hours. I put it away for about 90 minutes and gently tested it by working the scissors a couple times (couldn't quite resist ... plus I wondered if any Lock-Tite got between the scissor blades and might be a problem). Then I put it up and am not carrying it today. I'll test it with a screwdriver. I don't expect it to feel super-glued in there, but hope it's firm. Thanks for the advice.
-

Portrait Session with my 557 -

Fly fisherman catch, new.
Very nice, congratulations!
I think it is the model also known as Catch and Release.
Too bad that someone used too much the ceramic file.
Nice find

Yes, we have a sakwiki entry for it as Catch and Release. http://www.sakwiki.com/tiki-index.php?page=Catch+and+Release
dks, do you have a model number on the box too. maybe a European identifier number we can add to the wiki?
-
-
polished granite.
-
@dks said:
The Wenger is new.
The file came like that and does not look used.
I assumed it was like that on the side to allow sharpening of hooks etc.
If you think it was used then I may need to discuss it with the sellerI suggest you to discuss, then.
here is a good picture by ICanFixThat, where you can see how the ceramic tool is supposed to be on both sides
http://www.sakwiki.com/tiki-index.php?page=File+-+Ceramic+Diamond+Coated
Perhaps I'm wrong, but that white part from your picture at the end of the file seems to me a sign of use.
I do have a mint "Troller" and I can confirm you that my ceramic tool is exactly the same as the one shown in the link above -


Fly fisherman catch, new.
That really is a great find, I've been looking for one of those for a little while.
While I think the file may not be 100% correct, it looks more like a factory error, or possibly something they did on purpose at one time. It does not look like usage to me from what I can see in the photo.
If you're unhappy, I'll happily accept it as I'm not likely to use that file.
I think the computer system had the name of the knife as "Fly Fisherman Catch & Release", but that was simply too long to print on the label.
-
Enci, the knife was bought from a US seller.
The number given by him was 16956.
Here is the picture of the file given by the seller.
The seller describes the notch as a Fly-tying groove and it was made in 1996.
"Description: This discontinued model was listed in the 1998 Wenger catalogue as the "CATCH AND RELEASE". It has 19 functions including a unique, diamond coated fish hook sharpener with a fly-tying groove..."Maybe a fly fisherman will know.
As I said it looks like an intentional cut in the file rather than a mistake/damage.
-
I like it... definetly looks intentional. Was that an ebay buy-it-now deal I missed?
You scored!

....found it... great deal... looks like I missed it twice
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login