Show off your Sak mod's!
-
wow, the smurf filter had fun with that... what a concept

-
Yeoman Mechanic

-
Soon to be my first alox mod. Bought this 84mm electrician. Pivot hole is 2.5. Seems someone "made" an 84 and sold it to me. No worries. a little grinding and brass should fix this right up.

-
Exposed rivets are not fun.



-
A modern Golfer with Backtool (a hook). Syph, I hate you for your 84mm Golfer tutorial. ;)
I'm not happy with the snap of the scissor, but it works so far. I also will be more careful, shortening the scissor.
Next time I get some better drill bits. I wasted a cheap diamond bit, drilling a 2,2mm hole into the scissors. :)
However, a funny but very tough mod. Without my custom 600-1000 grit sanding paper for my proxxon It wouldn't have been that nice.


-
@HankSolon said:
A modern Golfer with Backtool (a hook). Syph, I hate you for your 84mm Golfer tutorial. ;)I'm not happy with the snap of the scissor, but it works so far. I also will be more careful, shortening the scissor.
Next time I get some better drill bits. I wasted a cheap diamond bit, drilling a 2,2mm hole into the scissors. :)
However, a funny but very tough mod. Without my custom 600-1000 grit sanding paper for my proxxon It wouldn't have been that nice.
Nice! Great work. Fun cutting down those scissors eh?
-
A Golfer with a hook..... I always had a slice

-
Executive with scales from Bordeaux Linen Micarta and high gloss polish
Front

and back

-
That's gorgeous - not seen a shine on micarta like that before

-
Hello - been browsing this forum for a while but this is my first post.
Hopefully I've figured out how to upload some pics of my first SAK mod. The donor knife was my venerable Climber given to me by my brother as a birthday present about 15 years ago. It was showing 15 years of wear and tear from being used as an EDC most days; the cellidor scales were cracked and chipped and the liners had taken a fair bit of abuse.
I have always loved titanium and decided - after browsing the forum for a while - to upgrade, keeping all the tools and substituting the scales and liners for Ti.
The scales are 3mm Ti plate and the liners 0.7mm sheet. It is held together with 1/8" 3/8" pivot barrels and 2-56 torx screws.
Seems ok so far, but needs a bit of work to perfect - counterbore the holes for the screws and bend the corkscrew into position so that it fits properly into the recess.
Thoughts?
AA


-
Welcome to the forum... nothing like making a grand entrance :D
Awesome mod. There are a lot of Ti fans here so you'll fit right in.
-
Sweet!
I like the liners and scales to be flush with the round ends of the backsprings though. What's the weight of that sucker? :D
-
For Ti scales on 91's I think I'd hide that 4th pin for esthetics as it really has no function except to stop the springs from moving. The SAK actually will function without out it, but the springs will slide back and forth and eventually pop out. What is a nice way to do it is just drill a hole half way through the scale from the inside and hide the pin that way.
You can remove the liners adjacent the scales as they have no function since Ti scales are plenty strong and the liners arent needed any longer.
Just do an 82 degree counter sink on the scale holes and get the countersunk torx screws then you can have them nice and flush.
And welcome!
-
Chicken V2.0 now with Florist blade and standard cap lifter. I needed the thick tang 91mm blade to repair the $4 champion and it really was a waste of a combo tool to have it in a Looney-Tunes knife like this.
Also the chisel grind of the florist blade means it needs to go on the "other" side and the combo tool nail nick is covered by the blade.
and MY GOD you can get an edge on those florist blades!! You should see the bald patch on my forearm.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

JR