Corkscrew - is it true?!
-
Was googling SAKs at work today and found an article on some random men's site called something like '5 things you should know about Victorinox penknives'.
One of the facts was that Victorinox make every part of every SAK except... The corkscrew :o. Apparently, Victorinox have the corkscrews made for them by a Japanese company. Anyone know if this is true? Here's the aticle:
3- Not all of the Swiss Army Knife is Swiss-made
But most of it is. At the Victorinox headquarters in pastoral Ibach, even the machines that punch long strips of steel (2,500 pounds of it a year) into recognisable tools by grinding, polishing, hardening, and (excepting certain hand-made models) assembling and casing them, are made by Victorinox for Victorinox in their mechanical department. The only part of your Swiss Army Knife that’s not 100% Swiss-made, oddly enough, is the little corkscrew. Turns out, the Swiss are really good at working with steel but not so good at forging. For that, you need some Japanese know-how. A Japanese company forges the corkscrews and ships them to Ibach for assembly.Feel free to ignore the obvious rubbish about using just over a ton of steel a year :D. Victorinox recycle 599 tons of steel grindings a year according to one of their own videos on YouTube.
-
I'm not sure about this. I actually read somewhere that the corkscrews are made in France but not sure about that either.
-
Sounds like an email to Switzerland might be called for...
-
I had read France too. It was on the interweb, so it must be true.

-
I can not confirm this 100%, i had a question in one time on a economy or eco knife. I got in reply that the corkscrew was made by 3 different French makers. I have never double checked this.
But now i read others to have mentioned France too and Japan aswell?It is strange to see on approx 1979-1981 Economy corkscrews and how similar they look today, now on the regular line.
-
I heard France as well. Its a useless tool for me though. The one time I used it it snapped. I can live without it.
-
Sorry to hear that :(. I use mine quite a bit and it seems pretty tough! I've emailed Ibach HQ so I await their answer with interest :).
-
Space Cowboy -
The corkscrew is useless to me also. I drink cheap beer and expensive scotch.
Wine is for the frufru crowd. No offense intented to those of you who do
drink wine. Although as a youngster I did drink Ripple and
Boone's Farm - but didn't need a cordscrew for them :-)Rich S
-
I don't use a corkscrew either, but I keep the eyeglasses driver there. Although I don't wear glasses it can still be helpful when I don't have the superior one on my wave.
-
Thankfully the Swiss are resistant to Californians.
California sued Leatherman for their USA logo on their tools, since not all parts were made in the USA. Good to see that the Swiss snub their noses at that over-nosy busy-body state. That's why there are no USA stamps on Leatherman tools anymore, but in all fairness the USA should still be allowed - since it does <u>not</u> state Made in USA. Even 'Oregon, USA' should be allowed. Even 'Oregon Proud' should be good.
-
I also never use the CS as drink whisky and most the wine we get has screw tops :D its the reason I like the tinker,but i do prefer the champs inline phillips as easyer to use

-
I'll give you time to adjust to your new reality.
Still Awesome! -
Any information on the corkscrew would be of interest. IIRC I read once that (some???) of the corkscrews on the Elinox models were made of inferior steel? One of the reasons I am curious in general about the corkscrew.
-
Oh ye unimaginative ones who disparage the venerable corkscrew
I do not drink wine either but that is probably the least use for the corkscrew anyway. The main one, already mentioned, is to perfectly hold a mini-screwdriver. It is also the perfect solution for tangled fine jewelry chain (my wife is a real believer since I have saved so many of her chains). Come on you closet corkscrew users out there, add to the list. 
-
I was always under the impression they were made in japan. I read that long ago, I think on here somewhere. It was a thread about how various manufactures have parts made elsewhere and what they were. Leatherman pliers heads from mexico, and Im sure it was swiss corkscrews from japan.
-
I'm a corkscrew user and proud of it.
I only have a few without them (not counting ALOX) and if I carry them, there's always a corkscrew on my keychain. :)I'd like to hear what Ibach has to say about where it's made though.
-
This is what google turned up on corkscrew making.
1 An open worm is formed by forging a steel rod into a helix shape. After sharpening one tip, the rod is heated to soften it for shaping. For example, 440C stainless steel is heated at 1,500°F (650°C) for 30 minutes, then at 2,100lF (1,000°C) for five minutes. 2 The hot rod is wound around a rotating cylindrical mandrel. To help guide the rod into a uniform spiral with the desired angle and spacing between successive coils, a grooved mandrel may be used. 3 Immediately after coiling, the spiral is hardened. This is done by reheating the worm to 1,500°F (650°C) and letting it cool slowly. Mild steel, on the other hand, is quenched by plunging the still-hot spiral into room-temperature water. -
Origin , no biggie , they work for me and many friends !
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
