Corkscrew - is it true?!
-
I can not confirm this 100%, i had a question in one time on a economy or eco knife. I got in reply that the corkscrew was made by 3 different French makers. I have never double checked this.
But now i read others to have mentioned France too and Japan aswell?It is strange to see on approx 1979-1981 Economy corkscrews and how similar they look today, now on the regular line.
-
I heard France as well. Its a useless tool for me though. The one time I used it it snapped. I can live without it.
-
Sorry to hear that :(. I use mine quite a bit and it seems pretty tough! I've emailed Ibach HQ so I await their answer with interest :).
-
Space Cowboy -
The corkscrew is useless to me also. I drink cheap beer and expensive scotch.
Wine is for the frufru crowd. No offense intented to those of you who do
drink wine. Although as a youngster I did drink Ripple and
Boone's Farm - but didn't need a cordscrew for them :-)Rich S
-
I don't use a corkscrew either, but I keep the eyeglasses driver there. Although I don't wear glasses it can still be helpful when I don't have the superior one on my wave.
-
Thankfully the Swiss are resistant to Californians.
California sued Leatherman for their USA logo on their tools, since not all parts were made in the USA. Good to see that the Swiss snub their noses at that over-nosy busy-body state. That's why there are no USA stamps on Leatherman tools anymore, but in all fairness the USA should still be allowed - since it does <u>not</u> state Made in USA. Even 'Oregon, USA' should be allowed. Even 'Oregon Proud' should be good.
-
I also never use the CS as drink whisky and most the wine we get has screw tops :D its the reason I like the tinker,but i do prefer the champs inline phillips as easyer to use

-
I'll give you time to adjust to your new reality.
Still Awesome! -
Any information on the corkscrew would be of interest. IIRC I read once that (some???) of the corkscrews on the Elinox models were made of inferior steel? One of the reasons I am curious in general about the corkscrew.
-
Oh ye unimaginative ones who disparage the venerable corkscrew
I do not drink wine either but that is probably the least use for the corkscrew anyway. The main one, already mentioned, is to perfectly hold a mini-screwdriver. It is also the perfect solution for tangled fine jewelry chain (my wife is a real believer since I have saved so many of her chains). Come on you closet corkscrew users out there, add to the list. 
-
I was always under the impression they were made in japan. I read that long ago, I think on here somewhere. It was a thread about how various manufactures have parts made elsewhere and what they were. Leatherman pliers heads from mexico, and Im sure it was swiss corkscrews from japan.
-
I'm a corkscrew user and proud of it.
I only have a few without them (not counting ALOX) and if I carry them, there's always a corkscrew on my keychain. :)I'd like to hear what Ibach has to say about where it's made though.
-
This is what google turned up on corkscrew making.
1 An open worm is formed by forging a steel rod into a helix shape. After sharpening one tip, the rod is heated to soften it for shaping. For example, 440C stainless steel is heated at 1,500°F (650°C) for 30 minutes, then at 2,100lF (1,000°C) for five minutes. 2 The hot rod is wound around a rotating cylindrical mandrel. To help guide the rod into a uniform spiral with the desired angle and spacing between successive coils, a grooved mandrel may be used. 3 Immediately after coiling, the spiral is hardened. This is done by reheating the worm to 1,500°F (650°C) and letting it cool slowly. Mild steel, on the other hand, is quenched by plunging the still-hot spiral into room-temperature water. -
Origin , no biggie , they work for me and many friends !
Chris
-
"In the past the corkscrew was forged. But since decades we buy the corkscrew from a French supplier as a semi-finished product." Sachbearbeiterin - Customer Service, Victorinox, quoted by Metaleer over on KnifeForums, 10-07-12
-
Thank you for this
. Since my info also had "French supplier". It was mentioned 3 different aswell but not sure. This they have done for along time. -
@Xelkos said:
Thankfully the Swiss are resistant to Californians.Good to see that the Swiss snub their noses at that over-nosy busy-body state.
Not all of us native Californians are keen on the Big Brother Bureaucracy there either, seems they are trying to idiot-proof everything to the insult of those of us with a shred of common sense. Which is one of the reasons I left, kind of a shame though, there is a lot of natural beauty there along with the unnatural ugliness.
-
Believe it or not i like Leatherman alot, no matter what people say it is a high quality product. Could be better against corrosion. this is just a maintenance problem. Well Leatherman is not for me to discuss here.
The Swiss use steel from other countries, design from other countries and parts. They have used different steels from Germany and France. Probarbly Sweden aswell, since both Wenger and Victorinox older catalogues say this. It must be steel from Sweden since they say drop forged Swedish stainless steel blades. I did some research before but i got to a stop. Could not find it, i had in mind Fagersta , this place suffered after the steel crisis in the 70s, put down around 1980. But Fagersta Sweden is just speculative.
Blades are not forged anymore on the SAK, and it is all about using high quality stainless with the DIN. After the image of the Brand
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
