The spring for adding scissors to 93mm Alox?
-
Ha! Yes maybe I'll be the first to make an 8 layer alox 93mm with 16 bottle opener layers! lol. Somehow I ended up with way more of those than any other part.
I saw the bottle opener mod before, but having seen the multi-saw one yet.

-
I seem to recall scibeer making an all bottle opener SAK years back as well. Mine was the beans and beer variant. A classic combination

-
@Syph007 said:
Blade spring from alox solo - Wastes a discontinued solo but looks awesome as the curve of the rest matches the knife profile and back looks flush, ends up looking like it was factory made that way. This works best with the older style scissors with fatter thumb pad.I have no qualms killing a solo, but what are these older style scissors you speak of?
-
Blade spring from alox solo - Wastes a discontinued solo but looks awesome as the curve of the rest matches the knife profile and back looks flush, ends up looking like it was factory made that way. This works best with the older style scissors with fatter thumb pad.
I have no qualms killing a solo, but what are these older style scissors you speak of?
The profile of the scissor part your thumb rests against changed over the years. The older style was fatter and had more metal to work with, while the modern style is thinner. There are at least 8 subtle variations in scissors over the years. Tom had pointed that out to me, I was only aware of 2. Having more metal there lets me dial in the fit with the solo spring so it has just the right tension and ramp to close proper.
-
Sorry if I am dense, but can the 91mm scissors fit the alox solo backspring as is? Does the backspring need modding? The scissors? In particular do late model scissors work? If so this would seem that Vic could make a factory 93mm alox with scissors with the tiny bit of work of drilling out the 91mm scissors to 3mm.
Hmmm
-
@Neil said:
I'm scared of grinding backsprings :ahhh :D so always use the older way with a 91mm spring but no back tool.
Works well but does look strange on the back. You can use a bushing on the middle pin, it will increase tension but personally I find the snap acceptable without.
A dedicated custom made backspring for the job would be cool 8)
How well will this work with a smooth back spring from a older model climber, etc?
-
@papercut said:
Sorry if I am dense, but can the 91mm scissors fit the alox solo backspring as is? Does the backspring need modding? The scissors? In particular do late model scissors work? If so this would seem that Vic could make a factory 93mm alox with scissors with the tiny bit of work of drilling out the 91mm scissors to 3mm.You will have to grind down the tip of spring a bit to make place for the scissors handle.
Also you won't get the full snap from the maximum angle because you can't grind off enough to allow this. The solo spring requires you to rest the scissors with the handle, not the blade tip. This bothered me so much that I introduced another modification to the spring: a custom rest

-
In the stickie harryf3 did this with the older smooth spring style. Check that out.
-
No longer stickied it seems, but I found it. How is the spring with such smooth back mod?
Cheers
-
Well it's shorter, so there is a gap.

</post/501900>
-
Well crap :(. Wonder what happened to the sticky? Mods check that please. I have the pics saved though :) I saved them all just in case it went missing :)
-
Found it! Apparently the mods removed from the sticky
lol./post/695993
Here ya go :) -
That one is the old style back spring from a 91mm no hook. You have to drill a new hole and grind the spring to fit. The snap is great once you reprofile it. If you want more snap you leave more material. However if you leave to much you risk bending the pins after time. Ask me how I know lol.
-
Solo springs work just fine. I think I used a good 30 or so in the early days for scissor mods.
-
Since you'll have to grind and/or drill in any case, use a Solo spring and press fit in a custom rest like I did. Best way to go without a full custom spring.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login