Scissors in a Skeletool
-
That could work, and the other end of the awl bit could have a driver on it as required.
-
If i find the time, i can tear into my MP 600 and do a pic of teh scissors, but i can´t compare it to the Skele as i ain´t got one.
-
@lowtech said:
If i find the time, i can tear into my MP 600 and do a pic of teh scissors, but i can´t compare it to the Skele as i ain´t got one.I don't think any MP600's have scissors, the Diesel does and the freehand.
I think the Flik Scissors may work too, but the backspring will have to be peened into place like my Black Tide outside scissor mod.
I think a 2nd layer scissor would be awesome like Evil510s, the only thing stopping you is a spacer and a rivet.

-
@Metropolicity said:
I don't think any MP600's have scissors, the Diesel does and the freehand.The Pro Scout does.

-
I don't think any MP600's have scissors, the Diesel does and the freehand.
The Pro Scout does.

OOOO. Obviously I am missing this model!
Are they same same scissors on the MP400?
-
Yep they are. Nice tool overall, one of my favorites. Saw coupler, scissors, file...... Very useful setup.
-
??? talking about the Pro Scout... Can't find it on the gerber-site anymore... ??? Did they discontinue it?
-
It's still there.

-
Aah, I see... Something to do with the 'nl.gerber.....' I guess

-
Notice tha gap between the scissors rest and the liner lock back.
It looks really close though if you picture moving the pivot hole over as far as possible. The lock could be made to engage, and the rest would almost hit the right spot.
If I didnt have so many other projects on the go, Id give it a shot.
Hmm. I have an extra pair of Vic scissors and a 3/16 carbide bit. Maybe on the weekend.
I have been meaning to take a look at the skele and see how I can make it mine.
I doubt there would be enough meat on the scissors to do that, but I'll take them apart again tomorrow and measure.
I checked. Not enough metal sideways. If you move the scissors so they are close enough so the back hits the Skeletool frame, the pivot is outside the scissors. Don't know if I'm explaining it right.

-
You're explaining that it won't work, which is enough info for me!
Not looking like a viable idea so far then :(
-
@nuphoria said:
You're explaining that it won't work, which is enough info for me!Not looking like a viable idea so far then :(
Pfft. You can always push the liner lock into the handle past it's spring out point. I did that to install the scissors on my Black Tide.
I'll get to the skele eventually, looking at making a drop in hammer that anyone can have :)
-
resurrecting this thread, worthwhie mod needs attention, especially for us UK users (perfect minimalistic EDC).
-
I'm much less experienced then most of the guys that already posted, but I was thinking about putting material instead of taking.
Please disregard the fact that the scissor I drawed is not a Vic, but I guess it serves the purpose of explaining the concept. Also one may note that the part would be in the way of the screw (or between the screw and the scissors itself), so yes the screw would end up a little higher the one next to it (the screw in question is the one connecting the plier head to the carabiner side of the handle).
I hope it wasn't too ???, I find incredibly dificult to describe this sort of things :ahhhOn a side note, one could also do this to the lockbar instead. A large (thick) washer would be required, in order to give space for this "insert", then a portion of the area under the washer would have to be cuted to acomodate the "insert", the detent ball bearing hole could be tapped to fixate the "insert" to the lockbar. If so desired a new detent ball bearing could be placed in the "insert" itself.
I ran out of SolidWorks so I can't do any real testing on the strength of the part in question. But I'm pretty darn sure that it could be (in case it actually works) 3D printed. You all must also notice that I do not posses any Skeletool of any kind, therefore am not able to assure the functional side of this part.
-
@WWW said:
I'm much less experienced then most of the guys that already posted, but I was thinking about putting material instead of taking.Please disregard the fact that the scissor I drawed is not a Vic, but I guess it serves the purpose of explaining the concept. Also one may note that the part would be in the way of the screw (or between the screw and the scissors itself), so yes the screw would end up a little higher the one next to it (the screw in question is the one connecting the plier head to the carabiner side of the handle).
I hope it wasn't too ???, I find incredibly dificult to describe this sort of things :ahhhOn a side note, one could also do this to the lockbar instead. A large (thick) washer would be required, in order to give space for this "insert", then a portion of the area under the washer would have to be cuted to acomodate the "insert", the detent ball bearing hole could be tapped to fixate the "insert" to the lockbar. If so desired a new detent ball bearing could be placed in the "insert" itself.
I ran out of SolidWorks so I can't do any real testing on the strength of the part in question. But I'm pretty darn sure that it could be (in case it actually works) 3D printed. You all must also notice that I do not posses any Skeletool of any kind, therefore am not able to assure the functional side of this part.
forgot to attach the file 
📎 [D__Koiti_CAD_MTOUKFNSTWS Model (1.pdf](/assets/uploads/_imported_attachments/migrated/54225_D__Koiti_CAD_MTOUKFNSTWS%20Model%20(1.pdf)
-
I'm much less experienced then most of the guys that already posted, but I was thinking about putting material instead of taking.
Please disregard the fact that the scissor I drawed is not a Vic, but I guess it serves the purpose of explaining the concept. Also one may note that the part would be in the way of the screw (or between the screw and the scissors itself), so yes the screw would end up a little higher the one next to it (the screw in question is the one connecting the plier head to the carabiner side of the handle).
I hope it wasn't too ??? , I find incredibly dificult to describe this sort of things :ahhhOn a side note, one could also do this to the lockbar instead. A large (thick) washer would be required, in order to give space for this "insert", then a portion of the area under the washer would have to be cuted to acomodate the "insert", the detent ball bearing hole could be tapped to fixate the "insert" to the lockbar. If so desired a new detent ball bearing could be placed in the "insert" itself.
I ran out of SolidWorks so I can't do any real testing on the strength of the part in question. But I'm pretty darn sure that it could be (in case it actually works) 3D printed. You all must also notice that I do not posses any Skeletool of any kind, therefore am not able to assure the functional side of this part.
forgot to attach the file 
I like it.

Maybe some of our members that have a mill could try it? ;)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login