And so it begins.... (My adventures into Alox!)
-
Maybe you can sacrifice a blade for the cam? Width would be fitting and you could use the pivot hole and reprofile the (big, i know) rest to a cam.
-
I suggest a locking alox awhile ago, JR
</post/713472> -
Well I was picturing having the cam as wide as the whole tool layer, but really I dont think the can opener needs the locking mechanism. So I think I will try it with just the cam over the blade spring, and a spacer on the opener layer. I think that would work fine, and if I have any broken blades, the base from one would actually work I think for a cam. Or a piece of spring... well I'll dig up something today and see how ti works.
I dont know if restricting the blade spring movement will make a completely solid lockup, or more of a just prevent accidentally closer type system, but I have to try to find out. :D
Once I get the mechanism working, then I can shape and polish the scales and make it look nice.
-
@Syph007 said:
Well I was picturing having the cam as wide as the whole tool layer, but really I dont think the can opener needs the locking mechanism. So I think I will try it with just the cam over the blade spring, and a spacer on the opener layer. I think that would work fine, and if I have any broken blades, the base from one would actually work I think for a cam. Or a piece of spring... well I'll dig up something today and see how ti works.I dont know if restricting the blade spring movement will make a completely solid lockup, or more of a just prevent accidentally closer type system, but I have to try to find out. :D
Once I get the mechanism working, then I can shape and polish the scales and make it look nice.
I was thinking about this. I wonder if it would be better to have the cam the entire length. Having the cam over just the blade may put more force on the hole in the scale next to the blade. Since the brass scales are soft, it may deform it. I guess it all depends on how much pressure is put on the locking cam pivot

-
A liner or frame lock 93 is still on my To-Do list.
maybe I could kill three birds with one stone and make a Damascus bladed, OHO, Liner locked 93mm Alox... -
Here are some more fit up pics of the progress for today. I think it will work out perfect.
I checked the scrap pile and found a nice thick piece of Ti to use for the cam part. Its not shaped yet, I just jeweler sawed a piece out, but it seems like it will be just fine. Keep in mind all these are just rough cut right now. Once I know the mechanism works I will sand and finish it all nice. The TI cam I'll carbidize if it needs it, but in this case a 'sticky' fit might be an asset.






-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
-
@gustophersmob said:
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
I cut it out with a jewelers saw, but I made it flat with a sander.
It took a few blades to cut that small piece since it's 0.225 thick. -
As well as "sticky" you might want to give it a tiny bit of "overcenter" locking on the cam to help prevent unwanted unlocking.
-
@gustophersmob said:
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
Haven't you seen Robert's sawing video... he has some impressive wrist action...

-
-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
I cut it out with a jewelers saw, but I made it flat with a sander.
It took a few blades to cut that small piece since it's 0.225 thick.D'oh, that makes sense :)
If I tried, I'm sure I'd break more than a few. I'm surprised how long the edges on mine last, but the slightest wrong twist and they snap very easy.
-
As well as "sticky" you might want to give it a tiny bit of "overcenter" locking on the cam to help prevent unwanted unlocking.
Oh thats a good point actually, I hadn't thought of that.

Boyo17 mentioned here filing the springs to get a certain radius clearance. I wonder if that was for something like the "overcenter" cam to work. Filing down since the backsprings aren't flat.

-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
Haven't you seen Robert's sawing video... he has some impressive wrist action...

I'm sure I'm being dense, but does Robert = Syph? Or did I just miss an obvious joke ::) :D
-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
I cut it out with a jewelers saw, but I made it flat with a sander.
It took a few blades to cut that small piece since it's 0.225 thick.D'oh, that makes sense :)
If I tried, I'm sure I'd break more than a few. I'm surprised how long the edges on mine last, but the slightest wrong twist and they snap very easy.
What surprised me most was how the material effects blade life. To give you an idea, when I cut out liners I can cut about 10 from brass with one saw blade, and with Ti, it takes me about 5 saw blades per liner. :D Aluminum is the easiest to cut, I can probably cut out 20 or more with one blade.
-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
Haven't you seen Robert's sawing video... he has some impressive wrist action...

I'm sure I'm being dense, but does Robert = Syph? Or did I just miss an obvious joke ::) :D
Yes its me! They were referring to my sawing video. lol
</post/679737>
-
Very cool. I am not sure i get the idea though. Is the cam to prevent the spring from moving? A video of the mechanism in action would be most interesting? How about the wenger licking mechanism. It is rather neat as well.
-
@papercut said:
Very cool. I am not sure i get the idea though. Is the cam to prevent the spring from moving? A video of the mechanism in action would be most interesting? How about the wenger licking mechanism. It is rather neat as well.Yes, it prevents the spring from moving up, and therefore, locks the knife in position.
-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
I cut it out with a jewelers saw, but I made it flat with a sander.
It took a few blades to cut that small piece since it's 0.225 thick.D'oh, that makes sense :)
If I tried, I'm sure I'd break more than a few. I'm surprised how long the edges on mine last, but the slightest wrong twist and they snap very easy.
What surprised me most was how the material effects blade life. To give you an idea, when I cut out liners I can cut about 10 from brass with one saw blade, and with Ti, it takes me about 5 saw blades per liner. :D Aluminum is the easiest to cut, I can probably cut out 20 or more with one blade.
Makes sense. I can do quite a bit of cutting in silver before one gets dulls. Copper dulls it a bit quicker.
Usually, though, I break them before they dull trying to cut intricate patterns. I'll twist it a little bit the wrong way and TWANG
You'd think I'd learn to do it the right way ::) -
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
Haven't you seen Robert's sawing video... he has some impressive wrist action...

I'm sure I'm being dense, but does Robert = Syph? Or did I just miss an obvious joke ::) :D
Yes its me! They were referring to my sawing video. lol
</post/679737>

Nice! I've gotten similar reactions from the wife. Though I'm not nearly that fast :D ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login