And so it begins.... (My adventures into Alox!)
-
@gustophersmob said:
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
I cut it out with a jewelers saw, but I made it flat with a sander.
It took a few blades to cut that small piece since it's 0.225 thick. -
As well as "sticky" you might want to give it a tiny bit of "overcenter" locking on the cam to help prevent unwanted unlocking.
-
@gustophersmob said:
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
Haven't you seen Robert's sawing video... he has some impressive wrist action...

-
-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
I cut it out with a jewelers saw, but I made it flat with a sander.
It took a few blades to cut that small piece since it's 0.225 thick.D'oh, that makes sense :)
If I tried, I'm sure I'd break more than a few. I'm surprised how long the edges on mine last, but the slightest wrong twist and they snap very easy.
-
As well as "sticky" you might want to give it a tiny bit of "overcenter" locking on the cam to help prevent unwanted unlocking.
Oh thats a good point actually, I hadn't thought of that.

Boyo17 mentioned here filing the springs to get a certain radius clearance. I wonder if that was for something like the "overcenter" cam to work. Filing down since the backsprings aren't flat.

-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
Haven't you seen Robert's sawing video... he has some impressive wrist action...

I'm sure I'm being dense, but does Robert = Syph? Or did I just miss an obvious joke ::) :D
-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
I cut it out with a jewelers saw, but I made it flat with a sander.
It took a few blades to cut that small piece since it's 0.225 thick.D'oh, that makes sense :)
If I tried, I'm sure I'd break more than a few. I'm surprised how long the edges on mine last, but the slightest wrong twist and they snap very easy.
What surprised me most was how the material effects blade life. To give you an idea, when I cut out liners I can cut about 10 from brass with one saw blade, and with Ti, it takes me about 5 saw blades per liner. :D Aluminum is the easiest to cut, I can probably cut out 20 or more with one blade.
-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
Haven't you seen Robert's sawing video... he has some impressive wrist action...

I'm sure I'm being dense, but does Robert = Syph? Or did I just miss an obvious joke ::) :D
Yes its me! They were referring to my sawing video. lol
</post/679737>
-
Very cool. I am not sure i get the idea though. Is the cam to prevent the spring from moving? A video of the mechanism in action would be most interesting? How about the wenger licking mechanism. It is rather neat as well.
-
@papercut said:
Very cool. I am not sure i get the idea though. Is the cam to prevent the spring from moving? A video of the mechanism in action would be most interesting? How about the wenger licking mechanism. It is rather neat as well.Yes, it prevents the spring from moving up, and therefore, locks the knife in position.
-
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
I cut it out with a jewelers saw, but I made it flat with a sander.
It took a few blades to cut that small piece since it's 0.225 thick.D'oh, that makes sense :)
If I tried, I'm sure I'd break more than a few. I'm surprised how long the edges on mine last, but the slightest wrong twist and they snap very easy.
What surprised me most was how the material effects blade life. To give you an idea, when I cut out liners I can cut about 10 from brass with one saw blade, and with Ti, it takes me about 5 saw blades per liner. :D Aluminum is the easiest to cut, I can probably cut out 20 or more with one blade.
Makes sense. I can do quite a bit of cutting in silver before one gets dulls. Copper dulls it a bit quicker.
Usually, though, I break them before they dull trying to cut intricate patterns. I'll twist it a little bit the wrong way and TWANG
You'd think I'd learn to do it the right way ::) -
Looking very
Nice work so far! 
You jeweler sawed that piece of Ti? Those are impressively straight cuts :o
Haven't you seen Robert's sawing video... he has some impressive wrist action...

I'm sure I'm being dense, but does Robert = Syph? Or did I just miss an obvious joke ::) :D
Yes its me! They were referring to my sawing video. lol
</post/679737>

Nice! I've gotten similar reactions from the wife. Though I'm not nearly that fast :D ;)
-
More white alox :D
What do you get for the stormtrooper stationed on a small moon populated by annoying fuzzy bipedal bears?
The Endor farmer! :D





-
Run Ewoks, run! :D
-
Echawawa!!!!

-
^ Awesome! :D
-
How about white liners on that
we can call it the humbug. -
Here's a regular old pioneer tool layout, dressed in white, with a black liner and screws.




-
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login