Silverline LM Crunch clone
-
I have just figured out why the SFLC plier head does not swing fully into the body.
If you look on this image:

You can see there is a dent between the silverline print and the big circular pivot for the plier. This is not present on the real crunch.

So there you have it! There is silverline's innovative feature! This is their improvement to make it a distinguished product!
But seriously, if they had put the dent on the other side of the same handle, in the same location, it would have stopped the plier head being recessed so far into the pivot handle and allowed it to close nicely. This would probably allow it to be 'flipped' like the leatherman.
-
Just received my Silverline Crunch - such amazingly quick service from Amazon UK. Looks fantastic and similar to the Leartherman Crunch except for the little notch mentioned above. The only issue I have is the tool does not close completely flush (2nd picture), and there is slight up/down play on the locked blade.
Very pleased for £9.10 -
Amazingly quick ??? It took them a week to deliver mine. Literally a week. They had not even dispatched them till 3 days after I placed the order. I suspect it is a ploy to get us to pay for Amazon prime...
Woot, I now have a UK legal to carry SLFC!
2 minutes with Dr File and...
Before:

After:

The blade 'sticks' in position like a non locking SAK but does not NEED the lock clip pressed to put it back, just a firm push. It is now a non-locking knife and thus legal to carry in the UK. The nicest aspect of this is the fact I would have the handles closed to use the knife anyway so there is no chance it could close on my fingers anyway.
Still, if a jobsworth copper wanted to take it he would find some reason to get you under section 57 of the 1984 'I don't like the look of your face sonny' act.
-
@xt60043f said:
I have just figured out why the SFLC plier head does not swing fully into the body.If you look on this image:

You can see there is a dent between the silverline print and the big circular pivot for the plier. This is not present on the real crunch.

So there you have it! There is silverline's innovative feature! This is their improvement to make it a distinguished product!
But seriously, if they had put the dent on the other side of the same handle, in the same location, it would have stopped the plier head being recessed so far into the pivot handle and allowed it to close nicely. This would probably allow it to be 'flipped' like the leatherman.
The copy is actually exactly as it should be, with the notch only on the left side of the tool and not present on the right side. Your comparison pictures have the tools seen from different sides.
-
The picture of the leatherman is from both sides.
-
My LM Crunch has exactly the same notches, really
-
I just looked at some images on the net, it would seem the picture I linked to is unique in that it does not have the bump between the pivot and the stamped leatherman logo. So the image is perhaps of an early model or a prototype?
None the less, I tried to remove the bump with a hammer and a punch. Unfortunately I do not have a 'round the corner' punch so I could not get a decent hit on it. I then drilled it out with a 3mm drill. The SLFC now closes in a similar fashion to the real one. i.e. the plier jaw sticks out one side and the 'clip in' pivot bump sticks out the other. I can now flip it open like the videos as well! whereas before, it was just too stiff to get the head out with one hand.
-
Well it seems Silverline no longer list this item on their web site :o
Discontinued!
-
@Taxi Dad said:
Well it seems Silverline no longer list this item on their web site :o
Discontinued!
you smurf ! you've dragged me down off the fence
I've just ordered from Amazon , even though I'm pretty sure I don't need it :ahhh :ahhh :ahhh :ahhhNonsense, everyone needs more tools!
-
@Taxi Dad said:
Well it seems Silverline no longer list this item on their web site :o
Discontinued!
you smurf ! you've dragged me down off the fence
I've just ordered from Amazon , even though I'm pretty sure I don't need it :ahhh :ahhh :ahhh :ahhhIt's gone up to over £10. If it is discontinued by Silverline for whatever reason, it will in itself become a collectors piece! It's a no brainer. Why pay over £100 for a similar tool, which is essentially only a very flimsy vise grip!
-
I think this discussion has doubled the value of the Silverline Crunch! We should be entitled to some sort of commission for that! :D
Def
-
hennypenny: £9.95 on Amazon UK atm
-
@hennypenny said:
Just received my Silverline Crunch - such amazingly quick service from Amazon UK. Looks fantastic and similar to the Leartherman Crunch except for the little notch mentioned above. The only issue I have is the tool does not close completely flush (2nd picture), and there is slight up/down play on the locked blade.
Very pleased for £9.10Can anyone suggest how I can make the tool close completely flush? If you study the picture closely, you'll see the two halves do not come together completely. It closes on the left of the pic, but there is a slight gap on the right .
-
First, get the biggest hammer you own....
Def
Sent from a digital multitool
-
@50ft-trad said:
I have the exact same one. I got it as I wanted to play with the idea of a Crunch, and wasn't prepared to splash out for the genuine item only to not like it (as I have done so many times before). It's a very well made tool for a tenner, and anyone wanting a cheapo Crunch substitute would be well served by this. I found it wasn't something that appealed to me personally, and it was worth a tenner to stop me buying the genuine article

I had my various Crunches apart last weekend and managed to cobble a pocket clip from a Kick by trimming and using the pivot from the Kick.
I'll post some pics when I get it done.
I too have one of these and as a sacrificial tool, it's awesome!! I also have the Silverline Faux Flair and it's not bad, but it dosn't have any of the inside tools. Just a 1/4" driver socket and various random tools.


Eric,
I can see your Silverline Crunch also has the same problem as mine, which is the two halves do not close completely flush. As a modder, can you see how this problem can be fixed? Please don't say "a big hammer!". I'm sure you'll have a more ingenious solution than that. -
I think you have to accept the limitations of the tool. It is cheaply made and thusly does not fit together so nicely. On saying that, if you use a rifler file, you can clear up some of the casting marks on the mechanism where is mates together at the large plier pin. In addition to that, if you file a little off the dent next to the large pin (as mentioned above) it can close in the same way as the real crunch. By close in the same way I mean the plier head will extend out of the side and the pin clip will extend out less.
-
mine still isn't here :ahhh :ahhh :ahhh
-
I told you. Literally a week.
On saying that, I ordered from OGB tool store. They were dispatched the same day,arrived the day after next. I honestly think amazon are being slow on purpose to encourage us to buy amazon prime.
I do not mind paying shipping, I do mind waiting 72hours before they even dispatch my stuff!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login