Silverline LM Crunch clone
-
Don't get too excited chaps. It's a very cheap copy of a tool which is very limited in function and frustrating to use in my opinion. By all means get one to play with, but I got rid of mine pretty quick, and I'm just REALLY glad I hadn't forked out for the genuine article.
It's a good tool to see if you like the format, but I doubt it's a tool that would suit most people in use - too much faffing about and not enough function. Unless you actually NEED locking pliers, this will almost certainly be lost at the back of a drawer in a short space of time. Again, just my opinion :)
-
@50ft-trad said:
Don't get too excited chaps. It's a very cheap copy of a tool which is very limited in function and frustrating to use in my opinion. By all means get one to play with, but I got rid of mine pretty quick, and I'm just REALLY glad I hadn't forked out for the genuine article.It's a good tool to see if you like the format, but I doubt it's a tool that would suit most people in use - too much faffing about and not enough function. Unless you actually NEED locking pliers, this will almost certainly be lost at the back of a drawer in a short space of time. Again, just my opinion :)
I've been thinking along the same lines myself. I'd like to try one out some day just to see how it works but I don't see myself using it. I have enough of drawer fillers already. ::)
-
I've got one since a few months now, and I can only share xt60043f's opinion.
I use it as a bike tool as I go to work each day that way, and it has always been a reliable tool. It's been through rain, dirt and grease, and it still works great.
The medium and philips screwdrivers are indeed useless, and the wire-cutters won't cut mutch. And, as the original item, it would benefit from a can-opener instead of the extra screwdrivers. Someone a bit skillful could adapt a can-opener on it I presume. The blade is easy to remove, a good point as this tool is sold in the UK.
The lifetime-warranty isn't important to me as I leave the UK in 2 weeks but it shall be noted that the conditions are rather strict : "This guarantee does not cover damage caused by abuse, misuse, modification, accident, or fair wear & tear".
And as 50ft-trad underlined, one must keep in mind that's not the average multitool either, and should be considered only if you need locking pliers.
-
I'm glad Al decided to get rid of his as quickly as possible since it ended up in my hands somehow....
I agree with what everyone is saying though- that this is only about 70-80% as good as the Crunch, which is a very limited market tool to begin with. Still, at about 10% the cost of the Crunch, it is a great deal.
Def
-
as my old Dad used to say "it might come in handy if you find a use for it !"

-
I have just figured out why the SFLC plier head does not swing fully into the body.
If you look on this image:

You can see there is a dent between the silverline print and the big circular pivot for the plier. This is not present on the real crunch.

So there you have it! There is silverline's innovative feature! This is their improvement to make it a distinguished product!
But seriously, if they had put the dent on the other side of the same handle, in the same location, it would have stopped the plier head being recessed so far into the pivot handle and allowed it to close nicely. This would probably allow it to be 'flipped' like the leatherman.
-
Just received my Silverline Crunch - such amazingly quick service from Amazon UK. Looks fantastic and similar to the Leartherman Crunch except for the little notch mentioned above. The only issue I have is the tool does not close completely flush (2nd picture), and there is slight up/down play on the locked blade.
Very pleased for £9.10 -
Amazingly quick ??? It took them a week to deliver mine. Literally a week. They had not even dispatched them till 3 days after I placed the order. I suspect it is a ploy to get us to pay for Amazon prime...
Woot, I now have a UK legal to carry SLFC!
2 minutes with Dr File and...
Before:

After:

The blade 'sticks' in position like a non locking SAK but does not NEED the lock clip pressed to put it back, just a firm push. It is now a non-locking knife and thus legal to carry in the UK. The nicest aspect of this is the fact I would have the handles closed to use the knife anyway so there is no chance it could close on my fingers anyway.
Still, if a jobsworth copper wanted to take it he would find some reason to get you under section 57 of the 1984 'I don't like the look of your face sonny' act.
-
@xt60043f said:
I have just figured out why the SFLC plier head does not swing fully into the body.If you look on this image:

You can see there is a dent between the silverline print and the big circular pivot for the plier. This is not present on the real crunch.

So there you have it! There is silverline's innovative feature! This is their improvement to make it a distinguished product!
But seriously, if they had put the dent on the other side of the same handle, in the same location, it would have stopped the plier head being recessed so far into the pivot handle and allowed it to close nicely. This would probably allow it to be 'flipped' like the leatherman.
The copy is actually exactly as it should be, with the notch only on the left side of the tool and not present on the right side. Your comparison pictures have the tools seen from different sides.
-
The picture of the leatherman is from both sides.
-
My LM Crunch has exactly the same notches, really
-
I just looked at some images on the net, it would seem the picture I linked to is unique in that it does not have the bump between the pivot and the stamped leatherman logo. So the image is perhaps of an early model or a prototype?
None the less, I tried to remove the bump with a hammer and a punch. Unfortunately I do not have a 'round the corner' punch so I could not get a decent hit on it. I then drilled it out with a 3mm drill. The SLFC now closes in a similar fashion to the real one. i.e. the plier jaw sticks out one side and the 'clip in' pivot bump sticks out the other. I can now flip it open like the videos as well! whereas before, it was just too stiff to get the head out with one hand.
-
Well it seems Silverline no longer list this item on their web site :o
Discontinued!
-
@Taxi Dad said:
Well it seems Silverline no longer list this item on their web site :o
Discontinued!
you smurf ! you've dragged me down off the fence
I've just ordered from Amazon , even though I'm pretty sure I don't need it :ahhh :ahhh :ahhh :ahhhNonsense, everyone needs more tools!
-
@Taxi Dad said:
Well it seems Silverline no longer list this item on their web site :o
Discontinued!
you smurf ! you've dragged me down off the fence
I've just ordered from Amazon , even though I'm pretty sure I don't need it :ahhh :ahhh :ahhh :ahhhIt's gone up to over £10. If it is discontinued by Silverline for whatever reason, it will in itself become a collectors piece! It's a no brainer. Why pay over £100 for a similar tool, which is essentially only a very flimsy vise grip!
-
I think this discussion has doubled the value of the Silverline Crunch! We should be entitled to some sort of commission for that! :D
Def
-
hennypenny: £9.95 on Amazon UK atm
-
@hennypenny said:
Just received my Silverline Crunch - such amazingly quick service from Amazon UK. Looks fantastic and similar to the Leartherman Crunch except for the little notch mentioned above. The only issue I have is the tool does not close completely flush (2nd picture), and there is slight up/down play on the locked blade.
Very pleased for £9.10Can anyone suggest how I can make the tool close completely flush? If you study the picture closely, you'll see the two halves do not come together completely. It closes on the left of the pic, but there is a slight gap on the right .
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login