Jeep light install
-
Grant, the video link doesn't work for me.
It takes me to a mobile photobucket folder but no video.Very cool additions though.

-
I'll put it on Youtube then. I tried putting it in the same folder on Photobucket as all the photos, but it seems that may not have been as successful as I'd hoped.
Def
-
-
That looks great! A really nice and clean install.
I really like the LED lights on the windshield and wouldn't mind getting something similar myself. I've been pondering installing a couple of cheaper ones to come one when my reverse lights come on, and maybe wiring them up to a three position switch so I can control if they come on in reverse or not. The great thing about LED lights is they draw so little amps, you can piggy back small lights off of the factory wiring and not worry about overloading it.I ordered a 5 meter roll of white LED lights off of ebay a couple of days ago and I'm going to try and add some extra light to the inside of the Jeep. The rear area is pretty dim, so I'm going to see what I can do to brighten it up some, and maybe add some sort of courtesy lights to the doors for when you open them they'll light up the ground and where you step into it a little.
-
If you think they look great in photos and video, wait till you see them in real life. :D
That sounds like a great idea- you can always use more light in the cargo area. I love the LED's- you are right, they are much brighter with a fraction of the power consumption, plus they never blow.
The incandescent bulbs bug me. The minute they blow i go to the nearest Canadian Tire, buy a two pack of bulbs, install one, put the other in the glove compartment and forget its there by the time the opposite one blows, at which point I repeat the process. I have to assume that there's a huge profit in people buying extra bulbs or manufacturers would have made the change to LED's long ago.
Def
Sent from a digital multitool
-
sure beats the "security system" we installed in your VW all those years ago.
-
Yeah, this is a bit more involved than a single LED flasher, battery tray and switch, but hey, it worked! No one ever broke into that car again!
Def
-
Pretty cool looking Grant!

-
@Grant Lamontagne said:
If you think they look great in photos and video, wait till you see them in real life. :DThat sounds like a great idea- you can always use more light in the cargo area. I love the LED's- you are right, they are much brighter with a fraction of the power consumption, plus they never blow.
The incandescent bulbs bug me. The minute they blow i go to the nearest Canadian Tire, buy a two pack of bulbs, install one, put the other in the glove compartment and forget its there by the time the opposite one blows, at which point I repeat the process. I have to assume that there's a huge profit in people buying extra bulbs or manufacturers would have made the change to LED's long ago.
Def
Sent from a digital multitool
Can't wait to see them. Think you'd be able to make it Saturday for the Renfrew run? It's a nice easy trail with good spots to play!
I've been thinking about replacing all the bulbs in the Jeep with LED ones. It really won't cost that much to do, and everything will be brighter, thus making the Jeep easier to see in bad weather.
-
I don't know if I'll make it on Saturday. I think I've been on Renfrew, I can't remember. I have a lot of work to do in the apartment upstairs and to be honest, I haven't been at it nearly as much as I should have been.
Amusingly enough I was at the dealer today and got talking to one of their technicians who has a 2 door Rubicon and I think he's going to buy a set of LED fog lamps off me. It's not often you go to a dealer and sell them parts! :D
Def
-
While not part of the LED light install, the air deflector I bought finally came in. It's a MOPAR part so it actually has Jeep molded into it- as if that matters... :P
The part that bugged me is that this one required drilling holes in the underside of my hood to mount it. Given how quickly things rust here I have no desire to expose any metal unless absolutely 100% necessary, and I don't consider an air deflector even close to being absolutely necessary. I managed to get some nice heavy duty 3M double sided tape, although to be honest I was doubting the physics of four square inches of tape holding this thing on.
It actually holds on surprisingly well, and when the hood is closed the deflector is sandwiched between the grille and the hood and held in place by the weatherstripping that lives there, so it's actually quite solid.
Not exactly involved technical work or anything, but I did use my Vic Compact scissors to cut the tape to fit! :D
Def
-
Not an update really, but I did manage to find this product page for the small lights I put on the windshield.
Apparently they are 1200 lumens each.
Def
Sent from a digital multitool
-
As if there weren't enough photos of my grille in this thread already, here are some more! :D
The weather warmed up a bit today so I made another change to my Jeep. I wanted clear lenses on the marker lights so when I noticed the 2014 models had them I ordered replacements. Here's a photo of it earlier:
And here it is now:
There are orange bulbs in there too, so they still flash orange, just they are clear when not lit up. I'll be ordering a similar set for the side marker/signal lights later on.
Def
-
It looks better.
that's us mobile
-
Thanks. I think so too.
Def
Sent from a digital multitool
-
Maybe I just missed it but why green I usually see yellow and orange as safety strobes.
-
Wow, those clear lights really do look a lot better than the orange!

-
@hrvstmn31 said:
Maybe I just missed it but why green I usually see yellow and orange as safety strobes.I would have preferred orange (amber) but the guy doing the install didn't have orange LED strips. Also, my boss who paid for most of this had green installed on his and liked it, so that's what we went with.
Def
Sent from a digital multitool
-
@Grant Lamontagne said:
Maybe I just missed it but why green I usually see yellow and orange as safety strobes.
I would have preferred orange (amber) but the guy doing the install didn't have orange LED strips. Also, my boss who paid for most of this had green installed on his and liked it, so that's what we went with.
Def
Sent from a digital multitool
Makes sense why pay for what's free and if I recall they're not cheap.
-
They aren't expensive if you order them online. You can buy them locally at places like Costco and Home Depot, and they still aren't really expensive, but they are several times what you pay when you order them from China on eBay or DX, so you don't want to buy local if you need a lot of them. The guy that did the install does this kind of work as a personal business, so we went with what he had. I think he had blue (big no no here since blue is reserved for Police only), red (also a big no no- you don't want to get caught with red lights on the front of a vehicle), green and pink, and so green was the choice- plus, as I said, my boss already had green and liked it, so that's what we went with, for uniformity in the company. My boss liked to differentiate us from everyone else on site, and for a while we did have blue strobes, which got him in trouble a couple of times when he forgot to turn it off when leaving the job site! :ahhh
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


