Face to a name
-
There's a pet thread somewhere I'm sure, but the subject does have a tendency to spill out :D
-
Done :D
Your Dog, Cat, Pig, Snake, Spider, Ant... Your PETS TOPIC :D
After a long discussion in another forum, we figured there wasn't really a topic devoted to our pets :D So here we go :D What's your pet? What's his/her name...
Multitool.Org Forum (multitool.ninja)
@nuphoria said:
There's a pet thread somewhere I'm sure, but the subject does have a tendency to spill out :DI'd already opened the new one... Actually, I did try to search for PET, but the only thing I got were many PETers... lol
-
Thread Necro!!!
There are quite a few new faces here since we last visited this thread, I think we need some more faces to put with names!!
I'll start, as I might have gotten a tad larger or smaller since my last pic. I'm still bald though...
Here I am at work, installing the chuck on my Lathe.

-
@Mercury said:
Thread Necro!!!There are quite a few new faces here since we last visited this thread, I think we need some more faces to put with names!!
I'll start, as I might have gotten a tad larger or smaller since my last pic. I'm still bald though...
Here I am at work, installing the chuck on my Lathe.

Now that's a freaking lathe! Don't get me wrong I've operated one before but it was only maybe 5'long and 4' tall, that things huge! JR
-
Its our biggest CNC at my shop. 20 inch chuck, 120 inch bed, 1000 rpm max spindle speed. I can take .200 cuts feeding at over .020 per revolution. I've cut parts in it that weighed over 800 pounds.
We have an even bigger lathe at our North Dakota location. It has 26 inch chuck. Never run that one myself.
Sent from my Galaxy S3 using crapatalk two point oh.
-
So thats what the big boy tools look like! That is a monster for sure.

-
Yup, she's a beast! Not my favorite machine out of all the ones I've run, but it is easy to program and easier to run.
C'mon guys, FACES!! :D :D

-
@Mercury said:
Its our biggest CNC at my shop. 20 inch chuck, 120 inch bed, 1000 rpm max spindle speed. I can take .200 cuts feeding at over .020 per revolution. I've cut parts in it that weighed over 800 pounds.We have an even bigger lathe at our North Dakota location. It has 26 inch chuck. Never run that one myself.
Sent from my Galaxy S3 using crapatalk two point oh.
Aw that's a cute little machine :D My largest at work is around 800mm chuck, 1000mm free swing (650mm over saddle), and 8000mm between centres. Heaviest workpiece we have had in that is around 6 or 7 tonnes .... and I don't consider that a particularly big lathe either :D :D
There's a company not too far from us with lathes up to 3m swing x 22m long that'll take jobs up to 260 tonne .... now that's BIG!!! :ahhh
-
@50ft-trad said:
Its our biggest CNC at my shop. 20 inch chuck, 120 inch bed, 1000 rpm max spindle speed. I can take .200 cuts feeding at over .020 per revolution. I've cut parts in it that weighed over 800 pounds.
We have an even bigger lathe at our North Dakota location. It has 26 inch chuck. Never run that one myself.
Sent from my Galaxy S3 using crapatalk two point oh.
Aw that's a cute little machine :D My largest at work is around 800mm chuck, 1000mm free swing (650mm over saddle), and 8000mm between centres. Heaviest workpiece we have had in that is around 6 or 7 tonnes .... and I don't consider that a particularly big lathe either :D :D
There's a company not too far from us with lathes up to 3m swing x 22m long that'll take jobs up to 260 tonne .... now that's BIG!!! :ahhh
Now THOSE are the big boy tools!
Of course we all know it sounds bigger in the metric system...

Our lathes seemed enormous to me when I first started here because I was used to running lathes with little 12 to 15 inch universal chucks and maybe 36 inch beds. Parts no larger than 10 lbs or so. So the step up to these was a large one. Some of our drill collars and risers are 30 ft long and rest on a hydraulic jack out the back chuck while we cut the pin ends. The first time I cut one of those I had to take video, pretty cool.
Sent from my Galaxy S3 using crapatalk two point oh.
-
@50ft-trad said:
Its our biggest CNC at my shop. 20 inch chuck, 120 inch bed, 1000 rpm max spindle speed. I can take .200 cuts feeding at over .020 per revolution. I've cut parts in it that weighed over 800 pounds.
We have an even bigger lathe at our North Dakota location. It has 26 inch chuck. Never run that one myself.
Sent from my Galaxy S3 using crapatalk two point oh.
Aw that's a cute little machine :D My largest at work is around 800mm chuck, 1000mm free swing (650mm over saddle), and 8000mm between centres. Heaviest workpiece we have had in that is around 6 or 7 tonnes .... and I don't consider that a particularly big lathe either :D :D
There's a company not too far from us with lathes up to 3m swing x 22m long that'll take jobs up to 260 tonne .... now that's BIG!!! :ahhh
But where is the pic of you standing on one? :D
-
@50ft-trad said:
Its our biggest CNC at my shop. 20 inch chuck, 120 inch bed, 1000 rpm max spindle speed. I can take .200 cuts feeding at over .020 per revolution. I've cut parts in it that weighed over 800 pounds.
We have an even bigger lathe at our North Dakota location. It has 26 inch chuck. Never run that one myself.
Sent from my Galaxy S3 using crapatalk two point oh.
Aw that's a cute little machine :D My largest at work is around 800mm chuck, 1000mm free swing (650mm over saddle), and 8000mm between centres. Heaviest workpiece we have had in that is around 6 or 7 tonnes .... and I don't consider that a particularly big lathe either :D :D
There's a company not too far from us with lathes up to 3m swing x 22m long that'll take jobs up to 260 tonne .... now that's BIG!!! :ahhh
But where is the pic of you standing on one? :D
+1, there are some big claims being made there 50ft trad.... ;)
-
@50ft-trad said:
Its our biggest CNC at my shop. 20 inch chuck, 120 inch bed, 1000 rpm max spindle speed. I can take .200 cuts feeding at over .020 per revolution. I've cut parts in it that weighed over 800 pounds.
We have an even bigger lathe at our North Dakota location. It has 26 inch chuck. Never run that one myself.
Sent from my Galaxy S3 using crapatalk two point oh.
Aw that's a cute little machine :D My largest at work is around 800mm chuck, 1000mm free swing (650mm over saddle), and 8000mm between centres. Heaviest workpiece we have had in that is around 6 or 7 tonnes .... and I don't consider that a particularly big lathe either :D :D
There's a company not too far from us with lathes up to 3m swing x 22m long that'll take jobs up to 260 tonne .... now that's BIG!!! :ahhh
Geez Al, is that "boatyard" you work at actually Harland and Wolff? :ahhh
-
-
Yes you do.
sent from Ducttapetech's mobile device
-
I'm not sure if I've posted in this thread before?


-
A pic of me from earlier this year...I've had a shave since :D

-
@50ft-trad said:
Aw that's a cute little machine :D My largest at work is around 800mm chuck, 1000mm free swing (650mm over saddle), and 8000mm between centres. Heaviest workpiece we have had in that is around 6 or 7 tonnes .... and I don't consider that a particularly big lathe either :D :D
There's a company not too far from us with lathes up to 3m swing x 22m long that'll take jobs up to 260 tonne .... now that's BIG!!! :ahhh
But where is the pic of you standing on one? :D
+1, there are some big claims being made there 50ft trad.... ;)
Hmmm ... now I have to figure out a way of standing 60-70ft away from myself and take a picture of an 8m lathe whilst still letting you tell that it's me standing next to it
:P :D :D :DThis might help give a bit of perspective though. It's an old pic from a few years ago (short hair back then) of me with a boring machine I was building/modding (well, me and a team of contractors - one of which I did actually commission from the boatyard). 48" front and rear chucks with 20" throat, built/modded to machine 18" bores x 40 ft long, but actually capable of producing 26" bores in tubular components and boring 14" (350mm) diameter through solid forgings in one pass. Obviously the boring bar is even longer than the workpiece, so the machine wouldn't all fit in the one pic :D Not the biggest machine I've seen by a long way, but certainly the biggest I've pushed buttons on :D

Maybe I should have put this in the Mod Squad instead
;)@jerseydevil said:
Geez Al, is that "boatyard" you work at actually Harland and Wolff? :ahhhNah, the boatyard is just a voluntary thing - nothing to do with work mate. I have had to work on a few large scale few marine components at work though :)
-
Your new camera has a 10s timer on it.Use it! (or buy the RC; works great)
:D :D :D
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
This one is taken just before boarding sailing ship 'de Eendracht', for a school trip (when I still studied at the maritime academy(??) in Rotterdam)
