Leatherman QC Fails
-
Exactly +1
-
My serrated blade rubs the handle of my Surge. I tighten it and after a few uses it happens again.
Some bits are impossible to get out of the bit extension without the use of pliers. -
I think there should be a $10,000 USD fine for each bad quality LM that goes out the factory

-
This thread wouldn't be complete without mentioning ...
Juice Can Opener (unfinished)
Juice Wine Assist (ineffective and damages bottles)
Juice Scissors (catching frame and erratic pivot tightness)
Juice Saw (deviating to back of awl on closure)
Juice Awl (unfinished)
Juice flat drivers (ouch, ouch, and ouch again)
Squirt - erratic build, tools (particularly blade) fouling scales on closure
Squirt & Style PS scissors spring
All small tools (IMO) inconsistent peening -
@50ft-trad said:
Juice flat drivers (ouch, ouch, and ouch again)Ya you dont pull them out for no good reason. You really need a flat driver if you want to endure the pain. :D
-
I am a LM fan and I carry a Juice most days, but I have to say that LM could do a better job on the profile of the Juice main blade. It is very inconsistent from one Juice to the next.
-
The juice's down fall is its rivet construction. It's really hit or miss.
Once I replaced the pivots and tensioned it, the blades, drivers and scissors are wonderful.
-
@BigMatt said:
For me last few years with LM are problematic. Maybe I simply look closer after the charm weared off.
The point is, 4 out of 9 LM I had in my hands had some issues, and one of them (rebar) had to be send back straight back from the box...I agree that they have had more issues recently, but I was merely pointing out that all the tools you mentioned are part of the same "era" of tools if you will. To say a tool is "older", most of us here at least think of the PST and Supertool and the like.
-
I got another blow to the Rebar, and was a little pissed cause I wasn't the user to find the flaw. The awl was a center punch for a few holes we needed to make. No hammer was used, but I want to beat the tool now. The awl deployed and the rebar folded up the plier head gets wedged in between the small and large flat driver. Every time its folded up. Such a pain to hear grinding of metal on metal.
My coworker asked me what the tool cost cause he thought he broke it. Told him don't worry. its got a nice warranty I cant wait to use. I should get two new BO PST's in return.
This just sucks. I had high hopes for the tool, being a ST300 fan. -
@Bensasupertool said:
I got another blow to the Rebar, and was a little pissed cause I wasn't the user to find the flaw. The awl was a center punch for a few holes we needed to make. No hammer was used, but I want to beat the tool now. The awl deployed and the rebar folded up the plier head gets wedged in between the small and large flat driver. Every time its folded up. Such a pain to hear grinding of metal on metal.My coworker asked me what the tool cost cause he thought he broke it. Told him don't worry. its got a nice warranty I cant wait to use. I should get two new BO PST's in return.
This just sucks. I had high hopes for the tool, being a ST300 fan.Perhaps you could mod your Wave with Rebar pliers! ;)
-
I got another blow to the Rebar, and was a little pissed cause I wasn't the user to find the flaw. The awl was a center punch for a few holes we needed to make. No hammer was used, but I want to beat the tool now. The awl deployed and the rebar folded up the plier head gets wedged in between the small and large flat driver. Every time its folded up. Such a pain to hear grinding of metal on metal.
My coworker asked me what the tool cost cause he thought he broke it. Told him don't worry. its got a nice warranty I cant wait to use. I should get two new BO PST's in return.
This just sucks. I had high hopes for the tool, being a ST300 fan.Perhaps you could mod your Wave with Rebar pliers! ;)

-
I'm on my way to the post office to send in my Surge. Two weeks after receiving a replacement. I work in a motor trade and had to cut off a split ring of a set of keys. Done it with one hand and there is no damage to the cutters.
Pliers tips are now missaligned and I have some play in the pivot...
I carry a pound of steel on my belt so I can whip out my "toy" and do what needs to be done without worrying. I am soo looking forward the 2013 version...Not mention the embarrasement, it's almost warranty abuse...
-
Just want to add my thoughts - have to say that the first Multitool I ever bought was the original Swisstool over 10 years ago (not counting my SAK Champ that is still 100% perfect after 20 years) and it remains absolutely the benchmark in quality, fit and finish - really unbelievably good quality and snappy and precise in a way that is far far away from my Leathermans' particurlarly their biggest product the Wave.
I have a 12/12 dated Wave that was supplied as a warranty replacement for an older model - the matt finish and thinner stock for the tools together with the uneven stiffness, the way the pliers hang up and gouge on the inner tools, the release buttons are clicky and sticky and just the cheaper overall feel compared to the Vic are slightly annoying but it still remains my favourite EDC due to the shape/feel and most of all the one handed blade opening and overall shape of the main blade.
To echo everyone else if only LM would take a leaf out of Vik's construction quality and overall QC.
My Skeletool is much better and definitely closer to Vik in terms of fit and finish as are all the older Micras I own (3), considering these are low price point, simple tools - their quality and fit is much better than the present Wave.
I guess like every company that grows fast and subsequently outsources much of the production something gives and economies are made, you can take this route so far before gradually your reputation starts to be erroded.
Having said that I remain a huge LM fan and their warranty in my experience is the best I have ever come across in practise.
-
I've only fairly ['06 - ?] recently discovered LM. Always wanted one and the Surge was my first purchase. I've used it pretty hard and extensively and not had any problems with it at all. That is, other than the looseness of the lanyard/clip...which I'm told by LM is by design.
Really love the MUT EOD I got a few years ago. However, I'm on my second issue. I had sent the first one admittedly on something of a technicality -- the plier head didn't really meet for 'finer' work. You could see more than a bit of daylight with the pliers closed. The new model is much better in that regard. Ah, yes - but now I'm having slight issues with the plier head scraping against the body as you're opening & closing. That and the pliers jamming closed on me when wire cutting. So, I've tightened/re-tightened the torx screws...and I guess it's livable. I really don't want to send it in again and I suppose it could be that I've not got the right tension in tightening them there screws.
We'll see. I'm not much of a reference in terms of LM usership going back to early LM days. Having already committed to, though, the new Surge and Raptor...seriously hoping it's all good there - which I'm expecting it to be.
I really love LM as a company too - and on the flipside, I can say I've had absolutely no negative issues with the two OHTs that I bought. So, all is not lost, but I understand perfectly well what you all are saying: QC is everything.

-
Tell me what you think, am I going crazy?
-
Thats a bad pivot for sure. I bet the casting is malformed inside.
-
That's the same as all my Rebars, over a little bit if time and some oil, the pivot will loosen up and the binding with disappear. You basically have to squeeze it, then up stick it and do it again and again to smooth out the motion.
I notice that when I did the first transplant of the rebar head into a wave body.
-
I hope we are both unlucky and they are not all like that. Rebar is really growing on me for the compactness and weight.
I have already been through "a little bit of time" and lube. Actually I have gained 2 pounds in body muscle trying to work this thing loose.
The problem is thay it cannot be operated one handed. It's riddiculous that I have to drop whatever I'm holding with my other hand just to open the jaws....
Reviewers on YT don't seem to have that problem, anybody here with "good" rebar? -
If this turns out to be an inherent defect with the pivot on the Rebar pliers, all those who have replaced their Wave with Rebar pliers will be kicking themselves. There does seem to be a lot more stories of QC problems with Rebars than any other Leatherman tools.
-
My rebar pliers do not do that. I just tried and squeezed as hard as possible and they still open freely.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login