Sharpening SAKs for Dummies?
-
@Saluki said:
I have a hard time keeping the blade flush with the stone throughout the entire motion.Yeah, this is the sort of thing I'm afraid of with someone who isn't a "knife person". I think a lot of people who mess around with knives and tools on a regular basis forget how hard it can be for someone with no experience to do otherwise basic stuff like sharpening.
Thanks for the suggestions. I think the Lansky looks like the best option, so that's what I'll suggest.
-
It's probably as simple as the blade not being reprofiled to the exact angle of the Sharpmaker yet. An easy helper is use a sharpie to blacken the cutting edge. On a blunt edge, the hones won't reach the actual edge, and the black mark will stay even after pulling the knife across the hone. So, when the marking is gone, the edge has the correct shape. If you have the money, get the diamond sticks to do the initial reprofiling. Reshaping an edge with ceramic hones is extremely time consuming.
Edit: This was meant as a response to Saluki, </post/738374>
-
@Steinar said:
It's probably as simple as the blade not being reprofiled to the exact angle of the Sharpmaker yet. An easy helper is use a sharpie to blacken the cutting edge. On a blunt edge, the hones won't reach the actual edge, and the black mark will stay even after pulling the knife across the hone. So, when the marking is gone, the edge has the correct shape. If you have the money, get the diamond sticks to do the initial reprofiling. Reshaping an edge with ceramic hones is extremely time consuming.Edit: This was meant as a response to Saluki, </post/738374>
Steinar, thanks for the suggestions. The SharpMaker seems like a great setup and is widely respected, so I probably just need more practice with it.
I do have a question for you or anyone else about the proper angle to use. In the SharpMaker instructional videos they say that 40 degrees is the angle to use under normal circumstances when sharpening a knife, and that the 30 degree setting is for back beveling a blade that has been sharpened several times and needs to have some extra metal removed to get down to a decent cutting edge. However, I believe in one of your earlier posts you mention the SAKs coming from the factory with a 30 degree edge and using that setup to sharpen a SAK. For a SAK that is relatively new and has not been resharpened previously, what would be the proper angle to use on the SharpMaker?
-
This is from the Victorinox USA web site. Apparently anything between 30 - 40 degrees is ok.
"Q. How do I sharpen my blade?
A. You can sharpen using a whetstone at an angle of 15° - 20°. This will result in a cutting angle of 30° - 40°. If sharpening on a grinding wheel, always cool with plenty of water to avoid excessive temperatures."http://www.swissarmy.com/us/app/content/customerSupportVictorinoxSwissArmyKnives
For what its worth I use the 40 degree slots on my Sharpmaker, since that's what Spyderco recommends.
-
@Saluki said:
I do have a question for you or anyone else about the proper angle to use. In the SharpMaker instructional videos they say that 40 degrees is the angle to use under normal circumstances when sharpening a knife, and that the 30 degree setting is for back beveling a blade that has been sharpened several times and needs to have some extra metal removed to get down to a decent cutting edge. However, I believe in one of your earlier posts you mention the SAKs coming from the factory with a 30 degree edge and using that setup to sharpen a SAK. For a SAK that is relatively new and has not been resharpened previously, what would be the proper angle to use on the SharpMaker?Both 30 and 40 will work just fine. It's just a choice. If adding a 40° edge to the blade, you will experience slightly worse cutting performance, but the edge will be somewhat more resistant to edge rolling. 40° edge is something you need for more brittle/lower ductility steel than what's in a SAK. I think that's why Spyderco recommends it, it is a safe choice. On low carbide and carbon steels I never bother with the 40° edge myself, and just use 30°.
If you choose 30°, you may have to sharpen a while to get a good result on a new SAK. Let's say the knife is ground 30.4° from the factory, and you sharpen with 29.5°, you will really have to shape a new edge, while with 40° you start sharpening the edge right away. As I said, it's just what you variables you think are the most important for your own use.
It's really not that important what the exact angle is, as long as it is consistent.
-
To me lasnky is a good overall choise and I often use it when I don't whant to bother with maintaing corner myself (watchin tv and sharpenin). Cause Sak's steele appear to be about soft, a good natural stone and any sistem that helps angle-controlling, ie a paintone pencil or a spring-clips strong enaught, may do the job. Arkansas, Italian natural wather stones from Alpi region, or the very small but effective falkniven D stone would be fairly good.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login