Catch a Coyote by its Tail ANNIVERSARY GIVEAWAY!
-
Awesome Giveaway
Had to use my old Charge Ti and a glove compartment PST II to hold and saw through the metal boot bracket on a car's gear shifter. It was a really hot day in the middle of a parking lot, and a mother and infant were stuck with a car that wouldn't start b/c of the jammed up shifter. I cut through the backet and removed it. The mother was able to start the car and get the air going to get the little one cooled off. W/o those two Leathermans those two might have been stuck for awhile in some awful heat.
-
About 2 years ago I was out on a boat fishing and through my own carelessness I ended up with a barbed hook through the webbing on my hand, used a Gerber Flik to cut the end off the hook and remove it. Thus letting me carry on fishing :D
-
Not sure if this counts... but here goes...
I work in tech support and had a guy ship me a USB flash drive because he wasn't able to get his files off of it. He said that it was broken, but wasn't sure what happened to it.
I removed the broken case/enclosure and found a tiny component that was broken off of the circuit board. I could see where it was supposed to be soldered on so I used the tweezers and toothpick from my Victorinox Craftsman to position the component and then carefully wrapped some tape around the board to hold it in place. I plugged it in, Windows recognized and installed the drive.
I was pretty excited when I called him to let him know that I was able to recover his files.
-
Nothing earth changing. I put a book shelf together with my Wave for my 90 year old Father.
-
Ok so like 15 years ago (at least) a buddy of mine has his radiator hose blow near Atlanta. I get the call to come help. I of course didn't have the foresight to bring a tool set. So we end up using my original wave, and Gerber 600(I think that's what it is) to change out the hose. As far as I know the hose is still on the thing, lol. This is the main reason I try and carry a pair now, because sometimes you need a tag team for the Job.
-
Well its not really a save the day kinda things its about everyday. I carry a multi tool everyday because I use the pliers for monkey fist cord work and multiple other uses. Every time I think today I'm not carrying a multi I won't need it I always do!
never fails! Before I got my new ride I used my tool almost everyday at some point to jimmy the door lock/latch so the door would stay closed. One of those days I thought I wouldn't need the tool I ended up driving 10 mins while holding the door to keep it from swinging open. That was quite an interesting task to say the least....... Doors are much heavier then a person thinks. :D Good Luck to all!Ash's mobile on the move.
-
I think the best save I've ever used a MT for was getting half a broken key out of a lock.
Charge Ti, few seconds of fiddling... massive locksmiths bill avoided! :D
-
I'll start from the top, all in one outing.
-
Got stuck on a multi-pitch with my climbing partner that broke a bone from some loose rock that crushed his hand.
...a. opened my Charge TTI to use it as a pry bar to luft up the rock hus hand was stuck under.
...b. gut hook to cut the sleeve back.
...c. used the scissors on my Charge TTI to cut the skin to stitch the cut closed, then the S30V Knife to cut the suture -
When he got stuck, he ditched his pack for whatever reason.
...a. Used the can opener to open up the empty fuel canister and made a stove with it using tinder i had in my pack and some dry brush that took hold in the cliff face. The birds nest I climbed to helped out too. Saw to cut some of the bigger pieces down and knife to split the wood into more manageable pieces.
...b. Took out a piece of wire framing from my pack and bent it into a holder for the newly fashioned stove using the pliers on it.
...c. Started the fire using the thin part of the File on my Charge TTI to shave off some of my fire steel then started the fire.
...d. Opened the dried food with the knife and stirred it with the file. -
Spot was dead...
... a. used the screw driver to change the battery, so we could send for help.
used it a few times over the next few hours, but hopefully you get the jest of it.
-
-
Late last year, one of the contractors that we deal with broke his wrist in a zipline accident (don't ask). He came in one day with a new cast on his wrist after surgery, and was complaining that the doctor didn't leave him enough room to move his thumb. Out came my US Army issure MP600 and its file, and within a couple of minutes the cast was a lot omore comfortable to him.
Getting plaster dust out of the file was a bit of a pain, but worth it......

-
It's the fact that you took time to take a photo while doing it

-
-
It's the fact that you took time to take a photo while doing it

:D Easier to illustrate the use when I posted it in the "what did you use your tool for today" thread. Besides, what good is this forum without lots of pics?

True. :D We do love pics. ;)
-
It's the fact that you took time to take a photo while doing it

:D Easier to illustrate the use when I posted it in the "what did you use your tool for today" thread. Besides, what good is this forum without lots of pics?

True. :D We do love pics. ;)
All this b tru
Also we all really need help

-
It's the fact that you took time to take a photo while doing it

:D Easier to illustrate the use when I posted it in the "what did you use your tool for today" thread. Besides, what good is this forum without lots of pics?

True. :D We do love pics. ;)
All this b tru
Also we all really need help

I can stop anytime I want to.

-
[quote author=kirk13 link=topic=45892.msg746480#msg746480 date=1372970618]
It's the fact that you took time to take a photo while doing it
:D Easier to illustrate the use when I posted it in the "what did you use your tool for today" thread. Besides, what good is this forum without lots of pics?

True. :D We do love pics. ;)
All this b tru
Also we all really need help

I can stop anytime I want to.

[/quote]Yeh me to brother

-
@nuphoria said:
I think the best save I've ever used a MT for was getting half a broken key out of a lock.Charge Ti, few seconds of fiddling... massive locksmiths bill avoided! :D
Yes, been there too!
Got back to my room, key handle falls off. If I hadn't have had my Wave I'd have been locked out and whilst spare keys were available, I'd have had no way of getting the spare key in with half the old one stuck in. -
Sorry for the thread hijacking, guys and gals.
I can't believe we actually derailed a giveaway thread.

And now back to our regularly scheduled program. .... The Larch. ;)
-
Ok, so I work for a medical company and one of our products was a spinal traction bed that turns side to side for pulmonary effect while the pt is packed in the bed immobile.
It was 4am when we delivered a bed straight to the helipad for someone coming in. As the staff transported they caught the drive belt on something so bad they pulled it right out of the track so it couldn't turn. Normally you can't fix something like that on site. Tools were not available and it needed to get fixed quick as they refused to move the pt.
None of the guys I worked with even carried mt's but I had my old Leatherman pst.. With it I was able to remove the main cover and belt guide, loosen the belt and get the belt where is should be.. Adjusting the tension and sensor on the way out...
They didn't have to move the pt nor replace the bed.
-
Last week I used my saw on my Vic swisstool to cut down 1x4's after the power saw broke on a remote job site.
my multitool is always getting out of jams like that and keeping old vehicles working .
I'd like try the one hand tool
thanks Leatherman
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
