Catch a Coyote by its Tail ANNIVERSARY GIVEAWAY!
-
Ok so like 15 years ago (at least) a buddy of mine has his radiator hose blow near Atlanta. I get the call to come help. I of course didn't have the foresight to bring a tool set. So we end up using my original wave, and Gerber 600(I think that's what it is) to change out the hose. As far as I know the hose is still on the thing, lol. This is the main reason I try and carry a pair now, because sometimes you need a tag team for the Job.
-
Well its not really a save the day kinda things its about everyday. I carry a multi tool everyday because I use the pliers for monkey fist cord work and multiple other uses. Every time I think today I'm not carrying a multi I won't need it I always do!
never fails! Before I got my new ride I used my tool almost everyday at some point to jimmy the door lock/latch so the door would stay closed. One of those days I thought I wouldn't need the tool I ended up driving 10 mins while holding the door to keep it from swinging open. That was quite an interesting task to say the least....... Doors are much heavier then a person thinks. :D Good Luck to all!Ash's mobile on the move.
-
I think the best save I've ever used a MT for was getting half a broken key out of a lock.
Charge Ti, few seconds of fiddling... massive locksmiths bill avoided! :D
-
I'll start from the top, all in one outing.
-
Got stuck on a multi-pitch with my climbing partner that broke a bone from some loose rock that crushed his hand.
...a. opened my Charge TTI to use it as a pry bar to luft up the rock hus hand was stuck under.
...b. gut hook to cut the sleeve back.
...c. used the scissors on my Charge TTI to cut the skin to stitch the cut closed, then the S30V Knife to cut the suture -
When he got stuck, he ditched his pack for whatever reason.
...a. Used the can opener to open up the empty fuel canister and made a stove with it using tinder i had in my pack and some dry brush that took hold in the cliff face. The birds nest I climbed to helped out too. Saw to cut some of the bigger pieces down and knife to split the wood into more manageable pieces.
...b. Took out a piece of wire framing from my pack and bent it into a holder for the newly fashioned stove using the pliers on it.
...c. Started the fire using the thin part of the File on my Charge TTI to shave off some of my fire steel then started the fire.
...d. Opened the dried food with the knife and stirred it with the file. -
Spot was dead...
... a. used the screw driver to change the battery, so we could send for help.
used it a few times over the next few hours, but hopefully you get the jest of it.
-
-
Late last year, one of the contractors that we deal with broke his wrist in a zipline accident (don't ask). He came in one day with a new cast on his wrist after surgery, and was complaining that the doctor didn't leave him enough room to move his thumb. Out came my US Army issure MP600 and its file, and within a couple of minutes the cast was a lot omore comfortable to him.
Getting plaster dust out of the file was a bit of a pain, but worth it......

-
It's the fact that you took time to take a photo while doing it

-
-
It's the fact that you took time to take a photo while doing it

:D Easier to illustrate the use when I posted it in the "what did you use your tool for today" thread. Besides, what good is this forum without lots of pics?

True. :D We do love pics. ;)
-
It's the fact that you took time to take a photo while doing it

:D Easier to illustrate the use when I posted it in the "what did you use your tool for today" thread. Besides, what good is this forum without lots of pics?

True. :D We do love pics. ;)
All this b tru
Also we all really need help

-
It's the fact that you took time to take a photo while doing it

:D Easier to illustrate the use when I posted it in the "what did you use your tool for today" thread. Besides, what good is this forum without lots of pics?

True. :D We do love pics. ;)
All this b tru
Also we all really need help

I can stop anytime I want to.

-
[quote author=kirk13 link=topic=45892.msg746480#msg746480 date=1372970618]
It's the fact that you took time to take a photo while doing it
:D Easier to illustrate the use when I posted it in the "what did you use your tool for today" thread. Besides, what good is this forum without lots of pics?

True. :D We do love pics. ;)
All this b tru
Also we all really need help

I can stop anytime I want to.

[/quote]Yeh me to brother

-
@nuphoria said:
I think the best save I've ever used a MT for was getting half a broken key out of a lock.Charge Ti, few seconds of fiddling... massive locksmiths bill avoided! :D
Yes, been there too!
Got back to my room, key handle falls off. If I hadn't have had my Wave I'd have been locked out and whilst spare keys were available, I'd have had no way of getting the spare key in with half the old one stuck in. -
Sorry for the thread hijacking, guys and gals.
I can't believe we actually derailed a giveaway thread.

And now back to our regularly scheduled program. .... The Larch. ;)
-
Ok, so I work for a medical company and one of our products was a spinal traction bed that turns side to side for pulmonary effect while the pt is packed in the bed immobile.
It was 4am when we delivered a bed straight to the helipad for someone coming in. As the staff transported they caught the drive belt on something so bad they pulled it right out of the track so it couldn't turn. Normally you can't fix something like that on site. Tools were not available and it needed to get fixed quick as they refused to move the pt.
None of the guys I worked with even carried mt's but I had my old Leatherman pst.. With it I was able to remove the main cover and belt guide, loosen the belt and get the belt where is should be.. Adjusting the tension and sensor on the way out...
They didn't have to move the pt nor replace the bed.
-
Last week I used my saw on my Vic swisstool to cut down 1x4's after the power saw broke on a remote job site.
my multitool is always getting out of jams like that and keeping old vehicles working .
I'd like try the one hand tool
thanks Leatherman
-
In my younger years as a wildland firefighter was out on my very first fire - Provo, Utah. We were on the mop-up stage of a fire complex, which is where those involved 'cold trailing' the fireline, put out any hot stops and flair ups, and also provide water and line support to the handcrews.
One day was in ash that was knee deep, looked like nuclear fallout. Had the hot foot big time. Ran out into a clearing, shoes feeling a tad mushy. After the boots cooled off, with help from some water, we had to dig that out and hose it down. In the process the threaded lasting on one boot had come undone and hot ash was getting into my boot.
On lunch break I grabbed the pack from the engine and pulled out my Super Tool, an 'S shaped' cadaver needle, and some government braided nylon cord my uncle procured from McClellan AFB.Used the awl on the Super Tool to poke holes through the rubber soles, then pushed the needle through the rubber - pulled out the other end, through the leather upper, and finally into the lasting. Then reversed that and repeated. Had my boots back to working order. They did last to the end of the season, but the Super Tool saved not only further misery but also my job.
Here is a photo of my first wildland firefighting outfit on a small flare up. We took advantage of the situation for two quick photos. Used an Olympus XA-1 for most firefighting and cycling photos back in the 90's.

-
Awesome giveaway! I would love an OHT!
Which time would I pick for my story though? The one that springs to mind instantly is when a friend and I were on a road trip, pretty much in the middle of nowhere. It started raining pretty bad, and his windshield wipers were acting up. We pulled over at the nearest rest stop, and with the only tool available (My SOG Powerlock), removed a few covers, tightened a few bolts, and got the things working again.
But it seems like it happens every other day too. The un-prepared: "Damn, I need a screwdriver!" Me: "What size? I've got a bunch!"
-
I ruined the knife blade, but I opened 2 cans of food while camping because we had no can-opener tool on the Leatherman I had at the time. There are now several packed in our kit. :)
-
I once used the large screwdriver on my Surge to prop up the front of a UPS just high enough so that I could screw it into a rack. Came in quite handy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
