What Did You Use Your Multitool For Today?
-
Used my leatherman juice s2 to unscrew and remove the top of the air filter case of my lawnmower when it wouldn't start. Washed the filter out and put back and it worked like a charm.
-
Used a Vic Rambler to cut open two packages from the UK. One containing the MTO Prypar from Tofty
and the other one a replacement cylinder head for a Kärcher pressure washer. Then used the Vic Spirit to disassemble parts off of the old broken cylinder head and onto the new one.
-
Used the Spirit X to fix up some wiring for a friend's sound system
-
Spirit "plus" driver. Hard Drive swap at work.
-
Just used my PST's blade to cut open a bag of chips, and earlier used my Spirit's pliers to reach down and pick up a thumb tack off the floor. Any excuse to find a use ;)
-
I also used the Spirit to reach a light switch that was buried behind a few stacks of used toners. I opened it up and straightened out the handles, then took the file out to reach the switch.
Sent from my XT901 using Tapatalk 2
-
Hijacked the computer at work to post this, didn't think I'd be able to from my phone. :) Today I had my MP600 Pro Scout on me, and I'm glad I did. Had to assemble a power washer. The 600 was the only tool I needed.
Not too many in action pics, since I needed two hands for most of it, but.....
<a href="http://s1102.photobucket.com/user/Jerseydevil379/media/IMG_20130720_101433_zpsdb64525d.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1102.photobucket.com/albums/g448/Jerseydevil379/IMG_20130720_101433_zpsdb64525d.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s1102.photobucket.com/user/Jerseydevil379/media/IMG_20130720_104058_zpsc5d820d4.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1102.photobucket.com/albums/g448/Jerseydevil379/IMG_20130720_104058_zpsc5d820d4.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1102.photobucket.com/user/Jerseydevil379/media/IMG_20130720_104819_zps07994a3f.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1102.photobucket.com/albums/g448/Jerseydevil379/IMG_20130720_104819_zps07994a3f.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s1102.photobucket.com/user/Jerseydevil379/media/IMG_20130720_105636_zpsb3231e4b.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1102.photobucket.com/albums/g448/Jerseydevil379/IMG_20130720_105636_zpsb3231e4b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
I had to use my Spirit yesterday at work to reach and remove a jammed up envelope in our mail folding/inserting machine. Seems to be one of the more common uses for me at work, and it does the trick every time. The internal parts of the machine and the path through which the envelopes and sheets travel are very confined and using my hand to reach in and try to grab something is quite difficult most times, so whatever MT I'm carrying at the time always saves the day

-
Super Tool File to scratch my ankle and shin sealed in this beast of an air cast. Squirt PS4 sissors to snip paracord. Farmer cap lifter for lunch time barley pop.
-
New member. Love this forum! Ok, used my Vic Workchamp and my pocket wrench ll to: tighten a few bolts, screw driver to pop the lid off of a can of spray paint, scissors to trim paper, awl to punch a hole in the top of a can of barley pop and scribe a line on some wood, saw to trim a limb, and knife to open a bag of lime. Love my Vic WC!!!

-
Gerber Balance today :D
Harvested some food from the garden, pulled up the ground spike for the rotary airer for re-siting elsewhere, cut garden wire for training kiwi fruit vines, and it helped me modify my potting bench slightly too :)
-
Fixed a burnt motor from an old electric fan with a skeletool cx

Sent from my Cruize W280 using Tapatalk 4 Beta
-
Fairly new here, but I'll chime in. I used my new Gerber Pro Scout (just received as an early birthday gift Thursday night) for opening up a wire loop used in the making of turkey wing and hawks tail whisk brooms. I usually make at least a few of these a day at work, so this is a pretty routine use for me. I was using a Leatherman Kick for this, but the pro scout is much easier to open one handed.
-
Used my LM Charge TTi to pull the disk drive from my old PC before taking it to the electronics recycling depot. Then dismantled the disk drive and scrunched up the platters (recording surfaces) so that no-one could ever extract any info from them. I found the extra geared leverage of my SOG Powerlock was needed to fully fold over the surprisingly tough platters.
I needed several very small torx bits to pull things apart, so the LM bit extender was also used.
-
My leatherman Squirt PS4 and Vic Small Tinker did a tag-team number on a broken dome light fixture in our vehicle.
Jury Rigged Repairs have been accomplished.
-
My little daughter came to me with a tiny toy part stuck inside a pen cap. After hitting the cap on my desk for a few times - with no success - I used the Explorer's corkscrew to grab and pull it out.
Not a life or death situation but, for a dad, his kid's "you are my hero" hug is better than anything :)I also used my self-locking pliers (unfortunately, closer than my upstairs Surge) to rise my older daughter's bike handlebars a bit, put the chain in place and pull the wheel back to tighten the chain.
And as it's summer and at summers I love cold beer, I used my on-me-today Ranger to cut the plastic wrapper of a 24 pack so I can put the cans in the fridge

-
I helped my girlfriend with a straw that just floated up all the time when we were at the cinema. A hole in the cap was made by the ordinary blade. Fortunately, I always have my Charge TTi with me :)
Skickat från min PadFone 2 via Tapatalk 2
-
Opened a big box of cat litter , with my faithfull MUT .
Chris
-
I let my wife use the PST Phillips to open the battery area on a little portable fan for the baby.
-
The Juice Pro saved the day today at the cigar shop. The member's area was being used for a concealed handgun class and the instructor needed something to unscrew the VGA cable from the back of the TV. I just happened to be there hanging out and I pulled out the Pro!¡!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login