What Did You Use Your Multitool For Today?
-
I had to use my Spirit yesterday at work to reach and remove a jammed up envelope in our mail folding/inserting machine. Seems to be one of the more common uses for me at work, and it does the trick every time. The internal parts of the machine and the path through which the envelopes and sheets travel are very confined and using my hand to reach in and try to grab something is quite difficult most times, so whatever MT I'm carrying at the time always saves the day

-
Super Tool File to scratch my ankle and shin sealed in this beast of an air cast. Squirt PS4 sissors to snip paracord. Farmer cap lifter for lunch time barley pop.
-
New member. Love this forum! Ok, used my Vic Workchamp and my pocket wrench ll to: tighten a few bolts, screw driver to pop the lid off of a can of spray paint, scissors to trim paper, awl to punch a hole in the top of a can of barley pop and scribe a line on some wood, saw to trim a limb, and knife to open a bag of lime. Love my Vic WC!!!

-
Gerber Balance today :D
Harvested some food from the garden, pulled up the ground spike for the rotary airer for re-siting elsewhere, cut garden wire for training kiwi fruit vines, and it helped me modify my potting bench slightly too :)
-
Fixed a burnt motor from an old electric fan with a skeletool cx

Sent from my Cruize W280 using Tapatalk 4 Beta
-
Fairly new here, but I'll chime in. I used my new Gerber Pro Scout (just received as an early birthday gift Thursday night) for opening up a wire loop used in the making of turkey wing and hawks tail whisk brooms. I usually make at least a few of these a day at work, so this is a pretty routine use for me. I was using a Leatherman Kick for this, but the pro scout is much easier to open one handed.
-
Used my LM Charge TTi to pull the disk drive from my old PC before taking it to the electronics recycling depot. Then dismantled the disk drive and scrunched up the platters (recording surfaces) so that no-one could ever extract any info from them. I found the extra geared leverage of my SOG Powerlock was needed to fully fold over the surprisingly tough platters.
I needed several very small torx bits to pull things apart, so the LM bit extender was also used.
-
My leatherman Squirt PS4 and Vic Small Tinker did a tag-team number on a broken dome light fixture in our vehicle.
Jury Rigged Repairs have been accomplished.
-
My little daughter came to me with a tiny toy part stuck inside a pen cap. After hitting the cap on my desk for a few times - with no success - I used the Explorer's corkscrew to grab and pull it out.
Not a life or death situation but, for a dad, his kid's "you are my hero" hug is better than anything :)I also used my self-locking pliers (unfortunately, closer than my upstairs Surge) to rise my older daughter's bike handlebars a bit, put the chain in place and pull the wheel back to tighten the chain.
And as it's summer and at summers I love cold beer, I used my on-me-today Ranger to cut the plastic wrapper of a 24 pack so I can put the cans in the fridge

-
I helped my girlfriend with a straw that just floated up all the time when we were at the cinema. A hole in the cap was made by the ordinary blade. Fortunately, I always have my Charge TTi with me :)
Skickat från min PadFone 2 via Tapatalk 2
-
Opened a big box of cat litter , with my faithfull MUT .
Chris
-
I let my wife use the PST Phillips to open the battery area on a little portable fan for the baby.
-
The Juice Pro saved the day today at the cigar shop. The member's area was being used for a concealed handgun class and the instructor needed something to unscrew the VGA cable from the back of the TV. I just happened to be there hanging out and I pulled out the Pro!¡!
-
I use the Juice Pro daily. And the Surge and Swisschamp XLT rarely now. They are better but bigger and heavier.
-
We had a bit of bad weather today which topped all my tomato plants in pots :ahhh :ahhh :ahhh
I used my Gold TiNi Swiss+tech Micro-Plus 8 in 1 pliers to cut some garden wire so I could brace all four plant supports together with a garden cane and use four more canes as outriggers to stop it getting blown over again.
Really impressed with that little tool lately. Not quite as good as an IDL T7 .... but then I've never seen an IDL T7 in Gold TiNi :D
-
The closet doorknob came right out in my hand this morning. And about 2.5 seconds later was securely replaced with my Wingman.

-
@Aleister said:
My little daughter came to me with a tiny toy part stuck inside a pen cap. After hitting the cap on my desk for a few times - with no success - I used the Explorer's corkscrew to grab and pull it out.
Not a life or death situation but, for a dad, his kid's "you are my hero" hug is better than anything :)I also used my self-locking pliers (unfortunately, closer than my upstairs Surge) to rise my older daughter's bike handlebars a bit, put the chain in place and pull the wheel back to tighten the chain.
Spoken like a true good dad!

-
The hooks on this lure stood no chance to the wave's wire cutters

-
Just used the PST's knife to open some mail here at work

-
Today at work the nozzle cover sensors on one of the tint machines decided to die. After a 30 minute call with tech support, I managed to get the machine to run without the nozzle cover in place, but had to remover the part to keep using the machine. The SI did some prying, unscrewing and poking, I did a fair bit of swearing, ;) and got the SOB working ok until a tech can get out to us, sometime early next week..... >:(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login