The Dremel (or clone ) Owners Club
-
@sparky415 said:
.....
I miss a lot because I normally hang out where the rust is :)I'm too easily tempted by the shiny things :ahhh :ahhh
A Dremel makes rusty things, shiny things.

-
I've been using Dremels and clones for years. They're great tools. For anyone who doesn't already know, the collet system sucks. Get a Keyless Chuck to use with all size bits (actually, get a few, as they get sticky after a while). And, Dremel bits at your local hardware store cost a small fortune if you need more than a couple, get bits and stuff from http://www.widgetsupply.com/category/dremel.html I've been buying from them for years. Oh, and be careful if you're new to Dremeling, as you can destroy things very quickly, so practice on kitchen knives or scrap before you try to mod your favorite knives and MTs, and keep your Dremel away from your gun unless you really know what you're doing.
-
Also if you are new to Dremeling wear safety glasses ;)
Those little cutoff disks etc explode :ahhh :ahhh
-
@sparky415 said:
Also if you are new to Dremeling wear safety glasses ;)Those little cutoff disks etc explode :ahhh :ahhh
+1
<-- From a guy who spent one December 31st at the eye doctors getting a metal splinter dug out from his eye.

-
Also if you are new to Dremeling wear safety glasses ;)
Those little cutoff disks etc explode :ahhh :ahhh
+1
<-- From a guy who spent one December 31st at the eye doctors getting a metal splinter dug out from his eye.

Ugh, that sent shivers down my spine! I don't do to well with FOD in eyes! I can scrape, cut or pry anything out of arms, hands legs ect, but eyes....

Sent from my iPhone 5 using Tapatalk
-
@sparky415 said:
Also if you are new to Dremeling wear safety glasses ;)Those little cutoff disks etc explode :ahhh :ahhh
Yeah i learnt that little fact but not with a dremel but with a 4 inch angle grinder, suddenly i felt my face bombarded by hard pieces of disc, luckily there was a ninja angel guarding my eyes and i came unschated :P
-
I've got a Dremel 200 and its probably my most used tool. I've used it for everything, even cutting the bead of a motorcycle tire to get it off the wheel more easily. I use it extensively for Glock and other polymer framed handgun modifications, too. I couldn't imagine living without one.
-
Put it to work today for working on a little leather project so I took a quick pic, sorry it ain't the best it was off of the ipad.. JR

-
Ok, now I want one. I am
over a Dremel 4000. -
Just ordered a Dremel 4000...... Starting to remember how much my wallet hate this forum and why Mastercard love this forum :P
-
I can now join this club! :D
I received a $50 Home Depot gift card, so I used that to go towards the Dremel 4200 kit.
http://www.homedepot.ca/product/4200-series-ez-change-high-performance-rotary-tool-kit/818030I've been wanting to get one for a few years now, and I was going to get the cheaper set, but figured that the 4200 came with some extras that I would probably buy later down the road, so I figured might as well get this set. With the gift card, I didn't mind the price too much.
I'm not sure what I'm going to do with it yet, but I'm sure I'll find something to try it out on!!
-
@derekmac said:
I can now join this club! :DI received a $50 Home Depot gift card, so I used that to go towards the Dremel 4200 kit.
http://www.homedepot.ca/product/4200-series-ez-change-high-performance-rotary-tool-kit/818030I've been wanting to get one for a few years now, and I was going to get the cheaper set, but figured that the 4200 came with some extras that I would probably buy later down the road, so I figured might as well get this set. With the gift card, I didn't mind the price too much.
I'm not sure what I'm going to do with it yet, but I'm sure I'll find something to try it out on!!
Hey, welcome aboard!
@stealth007s said:
I have three Dremels but I can't remember which ones they are. I know that two of them are small battery powered and bright blue. The other is corded and dual speed. When I get back from vacay here in Indy I'll check them out and post nomenclature stuff and images. (note to self: check Dremels when you get back from Indy)Hey stealth007, you know were still waiting,, lol. JR
-
@MadPlumbarian said:
Hey stealth007, you know were still waiting,, lol. JRYeah, yeah!¡!
me for that. If I remember after I get back from the shop (stupid TBI) 
Sent from Terry's Texting Tool
-
Hey stealth007, you know were still waiting,, lol. JR
Yeah, yeah!¡!
me for that. If I remember after I get back from the shop (stupid TBI) 
Sent from Terry's Texting Tool
Hey 9 months is better then waiting a whole year! Lol, JR
-
Well I got the Dremel 4000 right before christmas and finally godt to use it yesterday. Used it to polish the barrel on one of my pistols and lets just say that Dremel + Autosol = really shiny.
-
I have a Clarke one too with a flex shaft. Don't really use it that much but comes in handy on occasion
Sent from my iPhone using Tapatalk
-
I let my son borrow my corded Dremel for a guitar restoration and he brought it back telling me, "you know this thing only works when you squeeze it?" It did work fine before I let him use it

Sent from the Millennium Falcon via AG-2G quad laser cannons
-
@stealth007s said:
I let my son borrow my corded Dremel for a guitar restoration and he brought it back telling me, "you know this thing only works when you squeeze it?" It did work fine before I let him use it
Sent from the Millennium Falcon via AG-2G quad laser cannons
That doesn't prevent you from taking a pic
lol JR -
@MadPlumbarian said:
That doesn't prevent you from taking a pic
lol JRI'm about 1000 miles from it right now in Maine so is that good enough for you for now JR?
:DSent from the Millennium Falcon via AG-2G quad laser cannons
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login