The Dremel (or clone ) Owners Club
-
Great Thread! Why is it so burried. Thanks to sparky415 though, I found it from a link.
The Dremel was one of my favorite tools when I was young, and my favorite powertool I believe. After I burned up my clone though and got real Dremels, I was not using as many tools anymore as the world went software.
I have a hardly used Multipro 395 that still shines, and hords of different bits, cutters, sanders and stuff. I've tried the flex shaft a few times, I love the idea of it, but I found it hard to work with. I need more practice I think.
Today I mainly use cutoff wheels and brushes, and I use them on a Dremel Stylus. I love this little baby for what i do. I liked it so much I bought their mini cordless driver that looks almost the same, the driver is just OK, but my 18V Craftsman was way too big for the small stuff, and it needs a charge before each use because it is so old the batteries self discharge fast. Cordless though is just the way to go if you can.
I've recently updated my power tools so the mini Dremel driver seems very lacking, but still it's very small and uses hex-drive bits so it's still quite useful. If you have not experienced newer cordless Lithium battery power tools, you need to check them out.
Now that they make a stylus type handle attachment for their larger tools I am very tempted to get their 12V Lithium dremel. This thread may just push me to do it.
The instructable posted on the mini saw/router table is fantastic... I really want one of those, I think I have found a project I have to do. I don't have that dremel, but it's adaptable. I'll check for updates to see if anyone has done one with the flex shaft, that would be very cool and allow different dremels and more attachments to be used.
-
;)
There's a lot of cool stuff out there for Dremels

I also have a flexible drive shaft that I use in my polisher, it might be another option for some instead of a Dremel
Something like this one
http://www.amazon.com/Heavy-Duty-Shaft-Keyless-Chuck/dp/B001PTSWJ6 -
@ICanFixThat said:
Great Thread! Why is it so burried. Thanks to sparky415 though, I found it from a link.hardly buried, and still rather active thread!
-
Great Thread! Why is it so burried. Thanks to sparky415 though, I found it from a link.
hardly buried, and still rather active thread!
By burried, I was refering to its location "Forum »Non Tool Forum »Gadget Freak/EDC Forum", but I agree with the way the forum listing flattens the hierarchy it's not really burried. I admit it I don't leave the Swiss forum for more than a few minutes a month and forgot that the tree was artificial.
-
Great Thread! Why is it so burried. Thanks to sparky415 though, I found it from a link.
hardly buried, and still rather active thread!
By burried, I was refering to its location "Forum »Non Tool Forum »Gadget Freak/EDC Forum", but I agree with the way the forum listing flattens the hierarchy it's not really burried. I admit it I don't leave the Swiss forum for more than a few minutes a month and forgot that the tree was artificial.
I miss a lot because I normally hang out where the rust is :)
I'm too easily tempted by the shiny things :ahhh :ahhh
-
@sparky415 said:
.....
I miss a lot because I normally hang out where the rust is :)I'm too easily tempted by the shiny things :ahhh :ahhh
A Dremel makes rusty things, shiny things.

-
I've been using Dremels and clones for years. They're great tools. For anyone who doesn't already know, the collet system sucks. Get a Keyless Chuck to use with all size bits (actually, get a few, as they get sticky after a while). And, Dremel bits at your local hardware store cost a small fortune if you need more than a couple, get bits and stuff from http://www.widgetsupply.com/category/dremel.html I've been buying from them for years. Oh, and be careful if you're new to Dremeling, as you can destroy things very quickly, so practice on kitchen knives or scrap before you try to mod your favorite knives and MTs, and keep your Dremel away from your gun unless you really know what you're doing.
-
Also if you are new to Dremeling wear safety glasses ;)
Those little cutoff disks etc explode :ahhh :ahhh
-
@sparky415 said:
Also if you are new to Dremeling wear safety glasses ;)Those little cutoff disks etc explode :ahhh :ahhh
+1
<-- From a guy who spent one December 31st at the eye doctors getting a metal splinter dug out from his eye.

-
Also if you are new to Dremeling wear safety glasses ;)
Those little cutoff disks etc explode :ahhh :ahhh
+1
<-- From a guy who spent one December 31st at the eye doctors getting a metal splinter dug out from his eye.

Ugh, that sent shivers down my spine! I don't do to well with FOD in eyes! I can scrape, cut or pry anything out of arms, hands legs ect, but eyes....

Sent from my iPhone 5 using Tapatalk
-
@sparky415 said:
Also if you are new to Dremeling wear safety glasses ;)Those little cutoff disks etc explode :ahhh :ahhh
Yeah i learnt that little fact but not with a dremel but with a 4 inch angle grinder, suddenly i felt my face bombarded by hard pieces of disc, luckily there was a ninja angel guarding my eyes and i came unschated :P
-
I've got a Dremel 200 and its probably my most used tool. I've used it for everything, even cutting the bead of a motorcycle tire to get it off the wheel more easily. I use it extensively for Glock and other polymer framed handgun modifications, too. I couldn't imagine living without one.
-
Put it to work today for working on a little leather project so I took a quick pic, sorry it ain't the best it was off of the ipad.. JR

-
Ok, now I want one. I am
over a Dremel 4000. -
Just ordered a Dremel 4000...... Starting to remember how much my wallet hate this forum and why Mastercard love this forum :P
-
I can now join this club! :D
I received a $50 Home Depot gift card, so I used that to go towards the Dremel 4200 kit.
http://www.homedepot.ca/product/4200-series-ez-change-high-performance-rotary-tool-kit/818030I've been wanting to get one for a few years now, and I was going to get the cheaper set, but figured that the 4200 came with some extras that I would probably buy later down the road, so I figured might as well get this set. With the gift card, I didn't mind the price too much.
I'm not sure what I'm going to do with it yet, but I'm sure I'll find something to try it out on!!
-
@derekmac said:
I can now join this club! :DI received a $50 Home Depot gift card, so I used that to go towards the Dremel 4200 kit.
http://www.homedepot.ca/product/4200-series-ez-change-high-performance-rotary-tool-kit/818030I've been wanting to get one for a few years now, and I was going to get the cheaper set, but figured that the 4200 came with some extras that I would probably buy later down the road, so I figured might as well get this set. With the gift card, I didn't mind the price too much.
I'm not sure what I'm going to do with it yet, but I'm sure I'll find something to try it out on!!
Hey, welcome aboard!
@stealth007s said:
I have three Dremels but I can't remember which ones they are. I know that two of them are small battery powered and bright blue. The other is corded and dual speed. When I get back from vacay here in Indy I'll check them out and post nomenclature stuff and images. (note to self: check Dremels when you get back from Indy)Hey stealth007, you know were still waiting,, lol. JR
-
@MadPlumbarian said:
Hey stealth007, you know were still waiting,, lol. JRYeah, yeah!¡!
me for that. If I remember after I get back from the shop (stupid TBI) 
Sent from Terry's Texting Tool
-
Hey stealth007, you know were still waiting,, lol. JR
Yeah, yeah!¡!
me for that. If I remember after I get back from the shop (stupid TBI) 
Sent from Terry's Texting Tool
Hey 9 months is better then waiting a whole year! Lol, JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login