First Dismantled SAK
-
How I align and assemble a sak is I have a block of plastic with the holes drilled in them at the correct place. Then I add the springs followed by the tools, one on the spring one off. Then add the next liner. Using a screwdriver I then apply force to the spring to get the tool to seat and then push the liner into place. Works great and also keeps the pins from bending. They can bend if you don't have the other liner on.
-
@tattoosteve99 said:
How I align and assemble a sak is I have a block of plastic with the holes drilled in them at the correct place. Then I add the springs followed by the tools, one on the spring one off. Then add the next liner. Using a screwdriver I then apply force to the spring to get the tool to seat and then push the liner into place. Works great and also keeps the pins from bending. They can bend if you don't have the other liner on.Yep that works great. I used a chunk of plastic kitchen cutting board.
-
Cheers for the tips guys - I did find great way before your tips.
I put some soft leather around the spring and divider and with the tool below the spring I used my plier on my Deluxe Tinker to pull the Spring down. It seemed to work pretty well just hope I don't do any damage to the parts.
got the knife back together now but not been able to actually preen or anything as I don't have the brass rods yet so I keep taking apart and putting back together to get practice.
-
@Ross said:
Cheers for the tips guys - I did find great way before your tips.I put some soft leather around the spring and divider and with the tool below the spring I used my plier on my Deluxe Tinker to pull the Spring down. It seemed to work pretty well just hope I don't do any damage to the parts.
got the knife back together now but not been able to actually preen or anything as I don't have the brass rods yet so I keep taking apart and putting back together to get practice.
All parcelled up and ready to go mate ;) I've got some more parcelled up for a mate over the pond too, and as soon as I can get a window to get to the PO, they'll be on their way
Till then though, keep playing
In fact it might be worth practicing on a thinner knife with the old rods from what I've read, so you get the feel of the peening 
-
Thanks to 50ft I know have some rods to put back together my Huntsman :)
But these leads me to ask a question I did not give a second thought to - what should I cut the rods with?
-
what should I cut the rods with?
What about your teeth?

hahaha I like it - perhaps I can send to you to bite on lol.
-
But seriously. What about a pliers? Sometimes I use my Proxxon and a cutting disc, just for fun. :)
-
Hacksaw or dremel. That's what I use.
sent from Ducttapetech's mobile device
-
Ross,
If you use pliers you might want to leave the rods a little longer as the rod will deform a bit at the cut
Or as said above use junior hacksaw or a dremel
-
Thanks guys - working on this today so will let you know what I use - I think my dill as you suggested is going to be the tool of choice.
-
The advantage of using pliers over dremel or junior hacksaw is:
With a plier (and I'm speaking of on of those
) you get a clean and fast cut off. It's the best choice if the rod is already assembled in the knife. After cutting you use a metal file and create a flat end. A junior hacksaw or dremel can be too dangerous (damaging scales, it they are already mounted too). And a dremel with a cutting disc creates to much dust for this particular job. (That dusk you will never get out of the knife again).Having the rod alone, a hack saw or dremel is very good, sind you create a flat end and cut the rod in one working step. And with a cutting disk, you also can create a pike very fast (a mini wet stone is safer, however). A pike is very helpful when assembling your knifes.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


