First Dismantled SAK
-
Ross,
If you use pliers you might want to leave the rods a little longer as the rod will deform a bit at the cut
Or as said above use junior hacksaw or a dremel
-
Thanks guys - working on this today so will let you know what I use - I think my dill as you suggested is going to be the tool of choice.
-
The advantage of using pliers over dremel or junior hacksaw is:
With a plier (and I'm speaking of on of those
) you get a clean and fast cut off. It's the best choice if the rod is already assembled in the knife. After cutting you use a metal file and create a flat end. A junior hacksaw or dremel can be too dangerous (damaging scales, it they are already mounted too). And a dremel with a cutting disc creates to much dust for this particular job. (That dusk you will never get out of the knife again).Having the rod alone, a hack saw or dremel is very good, sind you create a flat end and cut the rod in one working step. And with a cutting disk, you also can create a pike very fast (a mini wet stone is safer, however). A pike is very helpful when assembling your knifes.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
