Key chain Drivers DIY
-
You hit on my favorite thing, re purposing, or better yet, cheap solutions.
I buy crimp caps as paracord decoration ($1 for 12) (mine are open on both ends
inner tubes for ranger bands (bike shop gives them to me for free)
this is another budget friendly piece of awesomeness!

-
Cool Mod, thanks.
-
@neillcurrie said:
Cool Mod, thanks.@detron said:
You hit on my favorite thing, re purposing, or better yet, cheap solutions.I buy crimp caps as paracord decoration ($1 for 12) (mine are open on both ends
inner tubes for ranger bands (bike shop gives them to me for free)
this is another budget friendly piece of awesomeness!

Thanks guys, Appreciate it :D
Detron, Id like to use your idea of crimp caps if I may. :)
-
How strong are these? Forgive me, I am not familiar with steel putty
Great idea, BTW, these look amazing
-
Cool Mod, thanks.
@detron said:
You hit on my favorite thing, re purposing, or better yet, cheap solutions.I buy crimp caps as paracord decoration ($1 for 12) (mine are open on both ends
inner tubes for ranger bands (bike shop gives them to me for free)
this is another budget friendly piece of awesomeness!

Thanks guys, Appreciate it :D
Detron, Id like to use your idea of crimp caps if I may. :)
Help your self! I cannot afford $8.00 metal beads, so I look for junk that works. I spent 3 hours in a big hardware store looking on every isle, when I discovered those crimp caps (the picture I put up was just a quick reference from the net. I will add some when I get home) the caps I bought look like a rivet without the "nail" that is pulled out. but bigger. if you run across something else let us know.
We should start a thread for upcycling (improved recycling)
-
here is a better picture from the net

-
Jph0200 made some awesome drivers.
I do not have any audio jacks, but I will get some. But for now, I can show what I made to hold me over.
Yes, that is part of a skillcraft ink pen. The type that had a kind of grippy Rubbery body. Had to carve out the one side to fit the bit. I used the awl on my Surge for that. Then super glued everything in place
Sent from my SPH-L720 using Tapatalk 2

-
nice walk-though and a cool idea.

-
That is absolutely excellent!

-
Really cool!
-
Thanks a lot guys :D
@detron said:
Jph0200 made some awesome drivers.I do not have any audio jacks, but I will get some. But for now, I can show what I made to hold me over.
Yes, that is part of a skillcraft ink pen. The type that had a kind of grippy Rubbery body. Had to carve out the one side to fit the bit. I used the awl on my Surge for that. Then super glued everything in place
Sent from my SPH-L720 using Tapatalk 2
Nice!! I like it!

If you carry warm colors you can also get old plated jacks from the electronics store
-
Jph200,
I went and bought 2 audio jacks last night. 8 need the epoxy still though
Sent from my SPH-L720 using Tapatalk 2
-
I want to do this but I'm pretty sure I feel too lazy today. :)
-
-
I went and bought 2 audio jacks last night. 8 need the epoxy still though
Sent from my SPH-L720 using Tapatalk 2
Nice cant wait to see :)
Please dont get normal epoxy, it not only takes longer but is very messy as well
@Nhoj said:
I want to do this but I'm pretty sure I feel too lazy today. :)When ever you want :)
They're very quick. My 1st one (the black philips) took about 15 to 20 minThe others only took 5 to 10 min
Sent using Tapatalk -
Jph0200,
So, I made my drivers, and tweeked your instructions a little.
I added a a washer that would fit inside the audio Jack sleeve, but not fit out the back.
Had to remove some of the inner stands to get the paracord through the washer. Also had to use an inner stand to get the bite of the cord through the washer.
Today at the flea market one guy was selling really strong magnets cheap. When I say strong, I mean strong. Rare earth strong
I bought 16x 1/4 Magnets and 3x 3/8
For $4I put one on the back of each bit, now they are magnetic. The lady picture shows how magnetic. Once the epoxy sets, I will see how much it can hold
Them I used a 1/4 inch compression sleeve from the plumbing section as a bead
Sent from my SPH-L720 using Tapatalk 2




-
So, I made my drivers, and tweeked your instructions a little.
I added a a washer that would fit inside the audio Jack sleeve, but not fit out the back.
Had to remove some of the inner stands to get the paracord through the washer. Also had to use an inner stand to get the bite of the cord through the washer.
Today at the flea market one guy was selling really strong magnets cheap. When I say strong, I mean strong. Rare earth strong
I bought 16x 1/4 Magnets and 3x 3/8
For $4I put one on the back of each bit, now they are magnetic. The lady picture shows how magnetic. Once the epoxy sets, I will see how much it can hold
Them I used a 1/4 inch compression sleeve from the plumbing section as a bead
Sent from my SPH-L720 using Tapatalk 2
Now THAT'S thinking!
-
Jph0200,
So, I made my drivers, and tweeked your instructions a little.
I added a a washer that would fit inside the audio Jack sleeve, but not fit out the back.
Had to remove some of the inner stands to get the paracord through the washer. Also had to use an inner stand to get the bite of the cord through the washer.
Today at the flea market one guy was selling really strong magnets cheap. When I say strong, I mean strong. Rare earth strong
I bought 16x 1/4 Magnets and 3x 3/8
For $4I put one on the back of each bit, now they are magnetic. The lady picture shows how magnetic. Once the epoxy sets, I will see how much it can hold
Them I used a 1/4 inch compression sleeve from the plumbing section as a bead
Sent from my SPH-L720 using Tapatalk 2
Now THAT'S thinking!
Metro,
You have no idea how much that means coming from you

-
So, I made my drivers, and tweeked your instructions a little.
I added a a washer that would fit inside the audio Jack sleeve, but not fit out the back.
Had to remove some of the inner stands to get the paracord through the washer. Also had to use an inner stand to get the bite of the cord through the washer.
Today at the flea market one guy was selling really strong magnets cheap. When I say strong, I mean strong. Rare earth strong
I bought 16x 1/4 Magnets and 3x 3/8
For $4I put one on the back of each bit, now they are magnetic. The lady picture shows how magnetic. Once the epoxy sets, I will see how much it can hold
Them I used a 1/4 inch compression sleeve from the plumbing section as a bead
Sent from my SPH-L720 using Tapatalk 2
Kudos Detron Awesome job! 
I'm gonna try this when I get home :D
-
I am going back to the flea market in hopes of getting more magnets. His process are a steal!
Sent from my SPH-L720 using Tapatalk 2
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
