The 30 Day Victorinox Huntsman Challenge!
-
STOP! Hammer time!

-
Every single thing I was meant to accomplish today got waylaid due to a series of ridiculous errors and thoughtless decisions. Day 27 is getting bumped forward a day.
It would have been hilarious in a TV movie, but in real life my day was dumb as a rock that ate paint chips as a kid.
-
Well that's unfortunate! I hate days like that.
Sent from my MB886 using Tapatalk 4
-
I was obviously tired when I made that post, because not only did it sound super-cranky, but it totally should have read Day 28.
The New Day 28 (which, obviously, is better than New Coke) was, naturally, construction-free (like me!) Instead, it was bike maintenance time!
First up, I had to swap out my bottom bracket. I'll spare you the entire boring process, save for this part:
Normally I would just suck it up and remove the chain with my hand anyway, but I thought, why not? Of course, I later cleaned the chain, which would have totally removed the problem. Oh brother.
Is it getting hook-ish around here, or is it me? I wanted to adjust the forks a bit, and I absolutely had the right hex key for the job. But you know what else I had? Vicky, and a pack of Leatherman flat-profile bits. Therefore, in what I assume was my only real option, I borrowed this idea from Xelkos over in the Hints and Tips thread:
It worked like a charm. Those flat bits fit perfectly in the hook, and as long as you turn the right direction, it all works beautifully. Then, if you want to turn the bolt back the other way, you just load the bit with the hook on the other side, and it's all gravy.
Finally, I wanted some superglue for fixing a cracked wheel reflector (I know they're dorky, but I spend a lot of time in traffic), but my superglue was...well...superglued shut. Scissors to the rescue!

I was going to steal a joke from <u>Robin Hood: Men In Tights,</u> but then I realized it might be a tad less tasteful than I had first thought...I know it doesn't seem like much, but that's Day 28!
-
Good stuff. Looks like Vicky is finishing strong.
-
What is a Huntsman called without the multi purpose hook?
-
This is one of the best reads I've had in a long time.
-
Day 27 happens to be my last day of construction, possibly ever. ...
Dang it, I'm a lurker, not a poster.. Nobody's asking...
why is it the last day ever? Lotto?Ha ha! No. It's taken awhile, but I'm moving into full-time teaching.
The Day 29 report will appear, as if by magic, this evening. The Day 30 will appear soon after. Next, probably really late tonight, will be a last look at Vicky's overall appearance and damage. Finally, sometime early-ish tomorrow, I'll post the whole challenge rundown.
@Luna Knife said:
What is a Huntsman called without the multi purpose hook?My Dad's Huntsman.
-
@Luna Knife said:
What is a Huntsman called without the multi purpose hook?
Older- the hook was added 1990 or 91 across the line for everyone with scissors.
Thanks for the response. "My Dads Huntsman" was funny too.
I picked one up with red scales at the flea market last week
-
I'm pretty sure my Dad's is from the mid-late '80s.
-
@Jothra said:
really late tonight, will be a last look at Vicky's overall appearance and damage. Finally, sometime early-ish tomorrow, I'll post the whole challenge rundown.Finally, as day 30 approaching, I have already starting to miss the whole challenge even before it ends. I remember Victorinox do make a few short films about the story of their users, if this list ever submitted to Victorinox, it is going to be a 2 hours long movie. :D
-
Day 29 was a sit-in-a-room-with-other-people-day kind of day, so all Vick really got to do was slice two apples, sharpen three pencils, and fortunately not those things at exactly the same time. The tweezers removed what I hope was my very last construction work sliver, which I obviously should have spotted and pulled before it started to hurt in a big meeting.
I know it's one of the more boring days, but a Huntsman's gotta nap sometimes.
-
I'm going to level with you guys: earlier today, I was trying to think of some really cool, really stupid thing I could do with Vicky to mark the last day of the challenge. You know, something with explosions and fire, or at least some smashing with a hammer or dipping in acid or something. But, after some thought, I realized that wouldn't really be fair (or reasonable) to the entire spirit of the challenge. Instead, here are the actual things that happened on...
Day 30!
At today's meeting (continued from yesterday's), I sharpened more pencils, and cut more food. Yum! Yu the food, I mean. N ot so much the pencils.
I bought a $1 iPhone case (with built in business card holder? Well, okay...) for my work phone today, because I'm not about to spend any real money on an iPhone (especially not one that doesn't belong to me). The only problem is that, as a $1 case for a $4,000,000 phone, it naturally didn't quite...well...work.
First of all, the plastic clip thingy for the business cards was bent too tightly. I know I don't really need to keep business cards in there, because it's weird, but I dislike broken things.

Vicky! Use your super prying awl power!It's more or less fixed, and now I should never be without my business cards, provided I have my work phone with me, which unfortunately would mean I'm at work where everybody knows who I am.
One of the edges of the actual phone-holding part wasn't formed quite right, and needed trimming down. More awl! Scrape fun!

"More awl! Scrape fun!" is basically just code for "why didn't you just spring for a $5 case at London Drugs?"To finish off my day doing something long, tedious, and necessary, I had to take all the spokes out of a tacoed bike wheel, because the rim is toast, but the spokes and hub are just fine. Normally I'd use a specialized spoke wrench, but I thought, what the heck, why not?

Oh, look...last tool of the challenge, and it's the screwdriver. What a shocky-wock!It took forever, because spokes are plentiful, but now I have a whole bouquet of them in my parts box, and a perfectly good hub to boot. Thanks Vicky!
So that's it. The very last day of the 30 Day Victorinox Huntsman Challenge, starring the bravest Swiss Army Knife of them all. The final damage report and rundown are on the way, as soon as the Tableobot 5000 is done processing my scantron results!
-
All in all Vicky reigns victorious!
For all the torture testing shes been through,Day 30 was a real day in the life for many a SAK.
Thank you for the 30day test Jothra,its been a daily pleasure to real. do hope someone from Victorinox sees this,as it deserves much wider exposure.
-
Secretly I was kind of hoping for some explosions, à la the Mythbusters, considering that Vicky is pretty much intact, but a faithful companion should be rewarded and given a noble retirement when their duties are over.
Thank you and best of luck with your future endeavors.
You are an excellent writer and humorist!

-
Another excellent thread Jothra. It was actually quite nice to see Vicky round out her trials on "normal" duties, rather than the horrific torture testing she endured previously :D :D
Most of us already acknowledge how excellent SAKs are in normal day to day usage, but I was mightily impressed how little damage occurred with the tasks that you might expect prove to be too much for a pocket knife.
I look forward to reading the conclusion, and finding out what Vicky has in store for her future

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


