What Did You Use Your Multitool For Today?
-
Spirit X to fix up some toys. The joys of babysitting

-
... and later to mod the Mora 1 Classic a bit
-
Used my MUT to open two imported beers . Also cut some crap with it .
Chris
-
I used my LM Crunch and Rebar and the PocketWrenchII, today, while taking apart to bikes that were falling apart, so I can bring them to the big garbage depot thingy. Among others, I used the Rebar to cut wires, the Crunch's 1/4" bit driver for driving allen-screws, and the PWII to undo some bolts.
Also, earlier today, I used the knife on my Rebar to cut open some of the plastic strings around the packs of newspaper I got.
And just now, I used a the blade of my Vic Waiter that was on my desk to cut some cheese :)
-
Pocketwrench II to unbolt a couple exhaust clamps swapping out old rusted ghetto rigged muffler, for new slightly less ghetto rigged Dynomax muffler. Did well enough, Blue sounds substantially better.
-
Tool: Victorinox Spirit
Task: Taking off/re-install AC filter screen on ceiling ducts
Performance: Excellent. Classic multitool application--climb on top of ladder to access the AC ducts, only to find out there are phillips that needed to be unscrewed, wimp out the Vic spirit and the rest is history. :D -
Used my Rebar and Fisherman while fishing today. To much to list, but quite a lot of scissor and cutting tasks. The pliers got a good workout also.
-
Used my LM wave to remove some projectors from their ceiling mounts
-
Used my Surge to take apart, clean and put back together 2 Hoover sweepers, put a new end on a electric cord and scrap out the bowl on my Dr. Grabow freehand. And the day is young yet.
sent from Ducttapetech's mobile device
-
We've been in the midst of a major home remodel (since last Nov actually). Some of it with professional builders, some ourselves. We're doing the majority of the kitchen. My wife built all the cabinetry. I'm doing most of the electric.
Yesterday, we put in the island hood. Charge ALX, Atwood Crypto and Leatherman Crunch have been invaluable in this.

Saturday before the Hood

-
I used the spirit x to tighten the handle on a pan
-
I used the spirit x wire cutters to make a clean cut on the end of a fishing rod to put on a replacement guide ring. I was able to do it but the spirit design wire cutters didn't work well.
-
@Nhoj said:
I used the spirit x wire cutters to make a clean cut on the end of a fishing rod to put on a replacement guide ring. I was able to do it but the spirit design wire cutters didn't work well.Honestly the wire cutters are my only gripe with the Spirit X. The rest of the tool being perfect makes up for it though. :D
-
@captain spaulding said:
I used the spirit x wire cutters to make a clean cut on the end of a fishing rod to put on a replacement guide ring. I was able to do it but the spirit design wire cutters didn't work well.
Honestly the wire cutters are my only gripe with the Spirit X. The rest of the tool being perfect makes up for it though. :D
Yeah if they just didn't grind that extra notch on the wire cutters. Honestly I would prefer pointier pliers on the spirit but I'm fine with the ones on there. And yea the spirit is pretty perfect. :)
-
@captain spaulding said:
I used the spirit x wire cutters to make a clean cut on the end of a fishing rod to put on a replacement guide ring. I was able to do it but the spirit design wire cutters didn't work well.
Honestly the wire cutters are my only gripe with the Spirit X. The rest of the tool being perfect makes up for it though. :D
Yeah if they just didn't grind that extra notch on the wire cutters. Honestly I would prefer pointier pliers on the spirit but I'm fine with the ones on there. And yea the spirit is pretty perfect. :)
Same here John. The pliers/wire cutters is my main issue with the Spirit. Fortunately I really don't use either much at all, so it's not a major issue. And as you both stated, the Spirit's awesome in every other respect

-
I just used the scissors on my Spirit to cut out some archive box number sticker labels, and I must say, I wasn't all that impressed. I've never actually used them to cut paper or anything similar in task until today. First, the reverse placement of the closing jaw (on the left of the base jaw instead of right) was more awkward than I expected it would be while in use. It made judging the edge where I was cutting a bit more difficult, but that's something to just get used to I guess. They cut somewhat messily/unevenly as well (I wish I had thought to take pics
), but that could have been partially caused by the awkwardness of judging the cutting line/path. Overall, probably not that big of a deal and just something to get used to, but fortunately I don't have cutting tasks like that very often (or at least not ones where I would resort to a MT/SAK pair of scissors anyway).Also used my Mechaneer to open a package containing a Streamlight Nanolight, which is a nice little light

-
to get another person hooked on Multi-tools!

seriously. I showcased my Charge TTi and AL to someone in perfect Vanna White fashion.
got another tool owner (once it arrives, already ordered) and hopefully another member of this forum.
-
to get another person hooked on Multi-tools!

seriously. I showcased my Charge TTi and AL to someone in perfect Vanna White fashion.
got another tool owner (once it arrives, already ordered) and hopefully another member of this forum.
Good job Detron
Another person has been 
They liked your former AL better than my TTi, oh well, they are both great tools!.
I am passing the Wave along to another person who wants one, same price, just extending your sale to another person who cannot quite afford a new one.
-
to get another person hooked on Multi-tools!

seriously. I showcased my Charge TTi and AL to someone in perfect Vanna White fashion.
got another tool owner (once it arrives, already ordered) and hopefully another member of this forum.
Good job Detron
Another person has been 
They liked your former AL better than my TTi, oh well, they are both great tools!.
I am passing the Wave along to another person who wants one, same price, just extending your sale to another person who cannot quite afford a new one.
Yes they are both great. The AL is a little better looking than the TTi I think, and smoother operating as well (at least between mine anyway, sometimes differs from tool to tool). Glad you were able to convert another person and extend the Wave sale to him/her. Nice job

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login