The 30 Day Victorinox Huntsman Challenge!
-
Impressive!
Thanks for that Challenge

Regards
Markus
-
Fantastic thread, and very well written!
Its always good to see someone getting the most out of a great tool :)
Sent from my Nexus 7 using Tapatalk 2
-
This thread has been the first thing I've looked for every evening when I kick back with the tablet. Thanks Jothra for a months worth of entertainment. I'm going to miss it.
-
No glorious death for immortality? >:D
I am just as happy to see Vicky the Huntress live to see another day, may it always find peace within and live a long prosperous life till the end.
Thank you for the pictures and wonderful read, putting it to extreme test is one thing, willing to take all the pictures and do all the writeups are entirely another level of commitment.

Thanks to you, I now have the impression that:
= 
-
Very interesting read this 30 day challenge has been
I can't believe 30 days has passed already. Thanks for putting in the considerable amount of time and dedication it must have required to do this challenge, and providing us with an interesting, if sometimes painful, read and pics 
-
@Jothra said:
Let's be serious. We all expected good things from the Huntsman. We're an entire group of people dedicated to proving the value of Swiss Army Knives. Something I worried about at first was that we were wrong. That the Victorinox Huntsman, or any other Victorinox model, was good, but not really a damage-soaking sponge. I had a niggling doubt that by the time I was done, I might have shattered our faith in tools we all love.Yes, I can absolutely relate to this one. Until you have tested something, you really don't know. I seriously didn't expect Vicky to take all that punishment and just move on. So this thread was a little scary to look at each day, but I couldn't look away either.

Btw, regarding the knife being open for many years: Victorinox says their knives are built/backsprings tempered so the springs never are bent beyond the critical angle of the steel when opening the knife, or even several implements in the same layer simultaneously. In other words, Vics should actually handle being stored half open just fine, also the spring tempering shouldn't be the limiting factor for how many times the knife can be opened and closed. As you noted, under normal conditions, these knives last a very long time. (Another effect of this little nugget of information: There is no risk in buying exhibition models of Vic knives, as long as the knife is otherwise undamaged. Good to know when bargain hunting or looking for oldies.)
-
@Steinar said:
Btw, regarding the knife being open for many years: Victorinox says their knives are built/backsprings tempered so the springs never are bent beyond the critical angle of the steel when opening the knife, or even several implements in the same layer simultaneously. In other words, Vics should actually handle being stored half open just fine, also the spring tempering shouldn't be the limiting factor for how many times the knife can be opened and closed. As you noted, under normal conditions, these knives last a very long time. (Another effect of this little nugget of information: There is no risk in buying exhibition models of Vic knives, as long as the knife is otherwise undamaged. Good to know when bargain hunting or looking for oldies.)I don't no longer have my original SAK that I owed 20+ years ago to compare, but recently I acquired a Wenger Director and Manager from a window display, and both of them seems to have fully extended for a very very long time(massive amount of dust builtup in the grooves). The minute I tried to close the blades, I already knew their springs were really really weak. I am not 100% sure it was due to prolonged opening, but I do suspect so.
Is there a significant difference between Victorinox and Wenger for the design and steel use?
-
I've been a lurker/member for a year, but this challenge pulled me out of my nest. A fantastic test, write-up and analysis. My Huntsman has been with me during this while Vicky was undergoing her test. I even bought another one, a pre-1991 version at the Flea Market last weekend - because I knew this was a great multi-tool.
Now I need a name for my blue Huntsman... :)
Dean
-
@RDaneel said:
I've been a lurker/member for a year, but this challenge pulled me out of my nest. A fantastic test, write-up and analysis. My Huntsman has been with me during this while Vicky was undergoing her test. I even bought another one, a pre-1991 version at the Flea Market last weekend - because I knew this was a great multi-tool.Now I need a name for my blue Huntsman... :)
Dean
How about "Blunty" ?
:D -
@RDaneel said:
I've been a lurker/member for a year, but this challenge pulled me out of my nest. A fantastic test, write-up and analysis. My Huntsman has been with me during this while Vicky was undergoing her test. I even bought another one, a pre-1991 version at the Flea Market last weekend - because I knew this was a great multi-tool.Now I need a name for my blue Huntsman... :)
Dean
Welcome to the world outside the closet Dean!
Chalk up another victory to Vicky!
-
@comis said:
I don't no longer have my original SAK that I owed 20+ years ago to compare, but recently I acquired a Wenger Director and Manager from a window display, and both of them seems to have fully extended for a very very long time(massive amount of dust builtup in the grooves). The minute I tried to close the blades, I already knew their springs were really really weak. I am not 100% sure it was due to prolonged opening, but I do suspect so.Is there a significant difference between Victorinox and Wenger for the design and steel use?
Wenger used to be regarded as second fiddle to Victorinox regarding quality, especially the backsprings, IIRC, the later years people have said the quality is pretty much the same. If the blades were fully opened, the problem was not how they were stored, though. Also, it is the cycle of bending and straightening which is the real problem, just keeping the steel in tension should normally not be that much of a problem.
-
@Dean
Welcome to MT.O, in the light of this thread, how about naming the blue huntsman Victor?
@Steinar said:
Wenger used to be regarded as second fiddle to Victorinox regarding quality, especially the backsprings, IIRC, the later years people have said the quality is pretty much the same. If the blades were fully opened, the problem was not how they were stored, though. Also, it is the cycle of bending and straightening which is the real problem, just keeping the steel in tension should normally not be that much of a problem.I think the groove dust probably just feed into my theory of the blades might have been opened for a long time. So it is more about the cycle than the actual staying opened? That does make sense to me, kinda like if I bend a strip of metal in one direction vs bending it back and forth until it breaks.
Now if only we have an automatic open-and-close machine to test how many times it opens/closes vs the back spring strength, it would be interesting.

-
@comis said:
I think the groove dust probably just feed into my theory of the blades might have been opened for a long time. So it is more about the cycle than the actual staying opened? That does make sense to me, kinda like if I bend a strip of metal in one direction vs bending it back and forth until it breaks.Yes, it is the same thing. Also, when the blade is fully opened, like when it is used, the backspring is not in tension, the same when the blade is closed. (I.e. it is in very low tension, some tension there obviously is.)
Now if only we have an automatic open-and-close machine to test how many times it opens/closes vs the back spring strength, it would be interesting.

Complete with an oildrip for the joint.

-
Well, sports fans, I could probably keep rocking Vicky as my main carry forever, but a deal's a deal. One month of hell = retirement! Vicky is now the only shelf queen SAK I own.
Now I carry Diana!

This is officially the only non-challenge tool I've ever named. It feels weird.P.S.—I do have one or two challenges in mind, but that sort of thing will have to wait until I'm completely moved and at least partly settled in my new town.
-
-
@Dean
Welcome to MT.O, in the light of this thread, how about naming the blue huntsman Victor?
Hmmm....Victor/Victoria springs to mind :ahhh
I'll point out here that I never once (as far as I can remember) used a gendered pronoun for Vicky. What was Vicky really short for?
-
Except on the book cover. Smugness undone!
-
@Jothra said:
I'll point out here that I never once (as far as I can remember) used a gendered pronoun for Vicky. What was Vicky really short for?@Jothra said:
And so ends the fabled story of long ago—we can close the covers on the Epic Tale of Vicky the Huntress!I think the last line of the story reviews that it's a she, so Vicky might stand for 'Victoria' as kirk suggested?
I did a quick search on google for 'huntress', the top two results yield:
http://en.wikipedia.org/wiki/Huntress_(comics)
http://en.wikipedia.org/wiki/Huntress_(Helena_Bertinelli)They both look bad asses and tough cookies, and probably what Vicky would look like if personified. :D
-
Fair call, comis. Besides, I think we all knew, really.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login