What popular tools have you decided are NOT for you ...?
-
@Mr. Whippy said:
On to Victorinox:
If I didn't work with oil, diesel, grease or hydraulic fluid all the time, the Spirit would be a good tool. My wife loves hers. The handles get so damned slick, it becomes a major problem holding onto the tool.Personally, I do like the Swisstool Spirit a lot, and I find the Black oxide version offers a lot more handle grip than the stainless steel version. If you do like Spirit, may wanna give that a try.
The BO Spirit indeed offers more grip than the stainless one, and another thing about the BO version, it looks more like a tool ... I mean, the first Spirit I bought, I was affraid to use because it just looked so nice. Now that I have a couple of them, I have one I carry every day and which sees a lot of use, and it has some scars to prove it, which also has its charms. But for some strange reason, it's easier to use a brand new BO than it is to use a brand new stainless version in my opinion.
Now, on topic, I wanted to say the Rebar, as some of you may know, I had some issues with my first Rebar, and the one I got in return was also a dud, so I decided I would never buy another Rebar ... but I found myself staring at one at a local outdoorshop just this weekend, I have some store credit from that shop and all the sudden, the Rebar came to mind ... So I'm not yet sure if I want to add the Rebar to this "special" list.
The ones I am sure about (that I'll never buy) are the Wingman/Sidekick, they just don't feel ... right (can't explain why, just don't like them). The OHT is another one I can add to the list, I would like one just to have one in my collection, but I already know I would never carry it (and since my funds are very low these last months, I can no longer buy tools which I know I'll never use, like my MUT a few years ago ...).
Same goes for most of the Gerbers, I have one (an old multiplier) and I think one is enough ...
Leatherman Juice/Squirt are also not for me, I always carry a plier based tool (Spirit/ST300/Wave) combined with a Sak, so I feel there's no reason for me to get a Juice or Squirt.
And last but not least, I don't think I'll ever buy a 84-93 mm SAK without scissors (one of the main reasons why I carry a SAK along with a tool like the ST300, or maybe ... the Rebar ... I can see where this is going to ... ::)).
Just my 2 cents ;).
-
So far the only ones I've had and didn't really get along with were a Juice CS4, and an S2.
Sent from my HTC One using Tapatalk 4
-
Some excellent responses
and I agree with much of what's been said (though I cropped out the ones I'd differ on in the quotes below)@enki_ck said:
<u>Wingman/Sidekick</u> - really? Even the initial "might get one to try out eventually" feeling was squashed with the ad campaign LM had for these and poisoned them for me. Whenever I hear/read any of these two names one of these images jumps in my head and I say NO. :P

<u>Freestyle</u> - Why? The original Freestyle concept made sense, this one, not so much. The Juice line already fills this slot and has the drivers too in the same size format, but a lighter package, with more tools, and yet, better pliers.
<u>MUT/OHT</u> not my cup of

<u>SOG:</u> Pliers rock, everything else, :-\ One of the most used tool on a multi for me are the screwdrivers, and the phillips on the SOG does not inspire confidence.
<u>Powerassist</u> - why would one need an assisted knife on a multitool?
<u>EOD models</u> -
<u>SAKs with backlayered phillips drivers.</u> If it's not ALOX, then it should have a corkscrew! :P I only own one SAK with a back layered phillips and that one came in a lot with other proper SAKs. ;)
<u>Victorinox:</u>
<u>108mm GAK</u> - the saw, the torture
<u>111mm OH models</u> -
they do nothing for me. Especially the Dual Pro/Hunter models with TWO OHO blades.<u>Wenger:</u>
<u>EVO anything</u> - Why, Wenger, why? So much added bulk, not ergonomic at all, never could understand it.
Totally agree on all these (cropped list)

@kirk13 said:
Of the tools I Havnt tried... LM OHT...it's ugly and its mother dressed it funny. Just don't get why LM had to build a Gerber
.
Absolutely :D Not to mention the stubby blades and blatantly WRONG tag line .... how are they even managing to carry that one off?LM Skeletool; the blade is OK, but everything else just didn't work for me. Not a fan of the fiddly LM bits and the ergonomics of the pliers was just horrible for me.
Forgot about the Skeli!
Just found it lacked utility. Every time I carried it,I needed something it didnt have

I fully agree. I always needed something that the skeletool was missing: can opener, file, scissors are my biggies. I like the blade and the cap lifter, but that is basically all the Skeletool has to offer. I hate the pliers. The bit driver requires the entore tool to be opened - I don't like that either.
Well said chaps

@sawman said:
What about <u>one-piece key ring tools</u>? IMO, many of those are awkward on the verge of being un-useable...Good call! As I said in another thread recently ...
@50ft-trad said:
... The ergonomics are horrible, and if you carry it in your pocket you're liable to puncture/rip the pocket - or worse, part of your body. To use any of the drivers (integral or as an add on), you need a large amount of clearance around the tool, and if the screws are recessed at all you're out of luck before you start. Frequently these tools are made out of a material that is wholly inapropriate for the tool style (ti or alu, or cast materials). To get the most out of it, you can't use it on it's own, you actually need a tin or bag of additional accessories - and if you have got a tin or bag with the extras in, there are far better ways of using those accesories than with this.@Mr. Whippy said:
Good topic!I'm a huge fan of Leathermans however, I have found that I really don't like Juices. The pliers get loose in the pivot too easily, the flat drivers are simply torturous. After some use, they become difficult to deploy and the can opener is next to useless.

OHT: I just don't get it.
CRKT: The Zilla and Zilla Jr. Actually the Zilla Jr is a nice little tool IF it used standard 1/4 inch bits.
The fullsized Zilla is just big and not all that functional.SOG: I hated my PowerLocks from the get go. The tool covers are a PITA. The tools aside from the pliers are flimsy and bend too easily. And that damned little spring on the 1/4 bit driver. I love the concept but not the spring.
Can't argue with any of this cropped list, except I don't like the Zilla Jnr either. As for the Spydie stuff I can't comment, though I actually think the "Spyderguppie" as named by Bob is not a bad little tool :D
Vic 111mm with backspring is the doomed culmination of two failed concepts in my mind :P
@dks said:
Victorinox minichamp. It has many things I do not need on a tool of that size (or even a bigger one)Gerber steady, great idea with several issues.
Totally agree on the Mnichamp, and totally *forgot *about the Steady

@Top-Gear-24 said:
And last but not least, I don't think I'll ever buy a 84-93 mm SAK without scissors
-
Anything Atwood - I don't get it, but maybe I don't appreciate the artistic merit???
Anything in titanium - I can't afford them so maybe my budget is keeping me from seeing the great aspect of anything made with titanium???
-
Al, what about the ones you don't agree on? :D I expected at least a couple of
-s for a few of them. :D -
@enki_ck said:
Al, what about the ones you don't agree on? :D I expected at least a couple of
-s for a few of them. :DI expected a
for some of mine too :D and I have been surprised at a few people's answers, but I'm not going to challenge them over it. If a tool doesn't work for you, it's irrelevant how popular it is. That's the whole point of the thread :PI think some folks can be a little quick to prejudge a tool if they haven't held/used one :-, though sometimes I can be the same so I can't really
for that either :DOh ... and another couple that come to mind ...
SOG Paratool - keeps the half arsed implements, loses the excellent compound leverage, and adds pliers that fold over ... :-\
Leathermac Crunch - the blade, the file, the fact you have to assemble the tool to use it ... NO!!!
-
I like the Skeletool. It's one of the few tools with a permanent place in my bicycle's seat bag. It's really super handy having reasonably big pliers in such a small form factor without giving up the multi-driver. Also, the wire cutters can handle spokes. Really.
On the other hand. I've handled a Surge, and I could never carry one, even in my satchel. The thing is a brick with pliers in.
-
@Jothra said:
I like the Skeletool. It's one of the few tools with a permanent place in my bicycle's seat bag. It's really super handy having reasonably big pliers in such a small form factor without giving up the multi-driver. Also, the wire cutters can handle spokes. Really.On the other hand. I've handled a Surge, and I could never carry one, even in my satchel. The thing is a brick with pliers in.
I completely agree with this. The Skeletool is perfect for backpacking, climbing, cycling, etc where you want a full sized pliers, multiple drivers and minimal weight. I also agree that the Surge is just too big. I like the large flat driver, but that's about it. Everything else can be done with a Charge or Wave with significant weight/size savings.
-
Wave, Surge and the like- I feel like I'm about to slice my thumbprint off with the way the blades are setup. I've carried just about every combination of hole/stud/disk/et al and lock combination you can find for a one handed opener and those are the only ones I've never felt comfortable with.
Oddly enough, I like the one on the Skeletool.
-
I feel like I'm about to slice my thumbprint off with the way the blades are setup.
So it's not just me ;). Though my main objection is the bit driver/bits which I consider too short without the extender. I don't like tools that are bad at removing/replacing doorknobs.
Still planning to buy a surge when the replaceable cutter model comes out. I think I'll do that 'mod' where you attach a zip-tie around the thumb-hole as tight as you can and then clip off the tail (basically giving you a plastic thumb stud.)
Dem
-
Never was completly hooked on the vic multis. They are made great, good fit and finish and work well, but.....they are to slick when wet or greasy and lack OH tools. Saks is where Vic shines to me.
Leatherman is the Charge series, sweet multis but like it is said before, the scales are kinda useless. They look sweet. I carried one for a few years,(lack of money kinda forced me to carry it til I got a surge again) but I like the Wave better and the Surge even more. Surge is king in my book.
I wish they would put better blades and cool stuff on the Waves and Surges like they do on the Charges.sent from Ducttapetech's mobile
-
late to the party on this thread, but wanted to add my $0.02...
@ducttapetech said:
Never was completly hooked on the vic multis. They are made great, good fit and finish and work well, but.....they are to slick when wet or greasy and lack OH tools. Saks is where Vic shines to me.completely agree with this... the Swisstool, Spirit, etc. just don't do it for me. the last one I tried out was a Spirit X, and it just didn't seem that sturdy. I could be wrong, since I only put it through light use, but I couldn't shake that first impression. :-\ I didn't like the shape/design of the knife blade either.
on the other hand, I got my first Vic SAK when I was 10, and have been a huge fan ever since.

@Mr. Whippy said:
I like the Skeletool. It's one of the few tools with a permanent place in my bicycle's seat bag. It's really super handy having reasonably big pliers in such a small form factor without giving up the multi-driver. Also, the wire cutters can handle spokes. Really.
On the other hand. I've handled a Surge, and I could never carry one, even in my satchel. The thing is a brick with pliers in.
I completely agree with this. The Skeletool is perfect for backpacking, climbing, cycling, etc where you want a full sized pliers, multiple drivers and minimal weight. I also agree that the Surge is just too big. I like the large flat driver, but that's about it. Everything else can be done with a Charge or Wave with significant weight/size savings.
I agree with this as well. I got my Skeletool CX when they were first released, and it has been one of my primary EDC tools ever since. :)
the Surge is a well-designed tool, and I want to like it, but like Jothra said, it's a brick. anytime I want to use a heavy-duty tool for home/yard projects, I find myself going with the ST300 instead. (it's almost 3 oz. lighter.)
and I agree with Nikola about the SOG MTs -- pliers are awesome, everything else is meh. :-\ the most-used tools on a multi for me are the main blade and drivers, and SOG's just don't cut it. (bad pun alert!)
-
I'm quite surprised how many have found the Swisstool/Spirit and Charge unsuitable for them :o
Less surprised about the Juice, Skeletool and SOG's inboard tools :PYet another example that there is no perfect tool, and that our needs and tastes are so varied

-
About the only MT I have that is a bit of a disappointment is the Gerber Dime.
A few others don't quite live up to the hype, or to other peoples opinions, but that little Gerber just feels cheap and nasty. Like Robert said, it's not good when the real thing feels like a fake.
I still carry it now and then but only on occasions when I doubt I'll be needing anything serious.
-
I was disappointed by the Dime because people said it was a good Gerber. I was expecting it to have quirks, like the funny sticking out bottle opener and I was expecting the rubbish file. I wasn't expecting to not be able to open the tools, and even when loosened off a bit the tools to come out in such a horrible clunky way. I was prepared to have to touch up the blade but was surprised at the quantity of filings that came off it.
I tried to like it, I carried it a few times instead of my Squirt but I just couldn't. I took it to work and left it on my desk for box opening duties but found myself just using the Wave I had on me instead. So it's now in my MT box tried to learn how to be a decent MT from all its big buddies ;)
-
One that I decided just wasn't for is the Crunch. I got my hands on one of the "tribute" MTs and, while the quality is not that of a real Leatherman, it did let me find out that I have almost no use for that particular selection of tools.

-
@50ft-trad said:
I'm quite surprised how many have found the Swisstool/Spirit and Charge unsuitable for them :o
Less surprised about the Juice, Skeletool and SOG's inboard tools :PYet another example that there is no perfect tool, and that our needs and tastes are so varied

Well said.

I shake my head in disbelief every time I hear someone say they don't like the Wave/Charge, but I realize that I probably cause a similar reaction when others see that I don't like there Swisstool/Spirit. :)
Thankfully, we have a wide selection to choose from... to each their own.

-
Periodically, I start to think I'm missing something by not having/carrying a Wave, since they seem so incredibly popular. And I have to give LM credit for being perhaps the only manufacturer to (sometimes) pull off the feat of putting OH blades on a pliers-based MT without ruining the ergonomics, sacrificing the other tools, or both. Then I go to my local store to handle one. After playing with it for a while, I realize I have no real use (or desire, anymore) for it, so I hand it back to the nice salesperson, and go on my way. Until the next time the urge strikes...
-
@nate j said:
Periodically, I start to think I'm missing something by not having/carrying a Wave, since they seem so incredibly popular. And I have to give LM credit for being perhaps the only manufacturer to (sometimes) pull off the feat of putting OH blades on a pliers-based MT without ruining the ergonomics, sacrificing the other tools, or both. Then I go to my local store to handle one. After playing with it for a while, I realize I have no real use (or desire, anymore) for it, so I hand it back to the nice salesperson, and go on my way. Until the next time the urge strikes...Just curious, what was off putting about the Wave and which multitool do you currently use?
-
I think the Wave just doesn't really fit any of my identified MT needs.
One of those needs is EDC, but at 8.5 oz, the Wave is heavier than I care to tote around all the time. Also, I only occasionally find myself in need of pliers or wire cutters. I always carry a SAK (three layers or less) and a pocketwrench II, often add a OH locking knife (liking the Spydercos ATM), and or sometimes add a LM Squirt. TBH, though, I have to admit that most days I could probably get by fine with just the SAK.
The other need is emergency kits. Weight is less of a consideration here, but I definitely want the most bombproof MT I can find, preferably with a large/diverse tool set. My current choice for this service is the Swisstool. Were I a die-hard LM fan, the nod would most certainly go to the Surge or ST300 over the Wave for this duty.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login