What popular tools have you decided are NOT for you ...?
-
I like the Skeletool. It's one of the few tools with a permanent place in my bicycle's seat bag. It's really super handy having reasonably big pliers in such a small form factor without giving up the multi-driver. Also, the wire cutters can handle spokes. Really.
On the other hand. I've handled a Surge, and I could never carry one, even in my satchel. The thing is a brick with pliers in.
-
@Jothra said:
I like the Skeletool. It's one of the few tools with a permanent place in my bicycle's seat bag. It's really super handy having reasonably big pliers in such a small form factor without giving up the multi-driver. Also, the wire cutters can handle spokes. Really.On the other hand. I've handled a Surge, and I could never carry one, even in my satchel. The thing is a brick with pliers in.
I completely agree with this. The Skeletool is perfect for backpacking, climbing, cycling, etc where you want a full sized pliers, multiple drivers and minimal weight. I also agree that the Surge is just too big. I like the large flat driver, but that's about it. Everything else can be done with a Charge or Wave with significant weight/size savings.
-
Wave, Surge and the like- I feel like I'm about to slice my thumbprint off with the way the blades are setup. I've carried just about every combination of hole/stud/disk/et al and lock combination you can find for a one handed opener and those are the only ones I've never felt comfortable with.
Oddly enough, I like the one on the Skeletool.
-
I feel like I'm about to slice my thumbprint off with the way the blades are setup.
So it's not just me ;). Though my main objection is the bit driver/bits which I consider too short without the extender. I don't like tools that are bad at removing/replacing doorknobs.
Still planning to buy a surge when the replaceable cutter model comes out. I think I'll do that 'mod' where you attach a zip-tie around the thumb-hole as tight as you can and then clip off the tail (basically giving you a plastic thumb stud.)
Dem
-
Never was completly hooked on the vic multis. They are made great, good fit and finish and work well, but.....they are to slick when wet or greasy and lack OH tools. Saks is where Vic shines to me.
Leatherman is the Charge series, sweet multis but like it is said before, the scales are kinda useless. They look sweet. I carried one for a few years,(lack of money kinda forced me to carry it til I got a surge again) but I like the Wave better and the Surge even more. Surge is king in my book.
I wish they would put better blades and cool stuff on the Waves and Surges like they do on the Charges.sent from Ducttapetech's mobile
-
late to the party on this thread, but wanted to add my $0.02...
@ducttapetech said:
Never was completly hooked on the vic multis. They are made great, good fit and finish and work well, but.....they are to slick when wet or greasy and lack OH tools. Saks is where Vic shines to me.completely agree with this... the Swisstool, Spirit, etc. just don't do it for me. the last one I tried out was a Spirit X, and it just didn't seem that sturdy. I could be wrong, since I only put it through light use, but I couldn't shake that first impression. :-\ I didn't like the shape/design of the knife blade either.
on the other hand, I got my first Vic SAK when I was 10, and have been a huge fan ever since.

@Mr. Whippy said:
I like the Skeletool. It's one of the few tools with a permanent place in my bicycle's seat bag. It's really super handy having reasonably big pliers in such a small form factor without giving up the multi-driver. Also, the wire cutters can handle spokes. Really.
On the other hand. I've handled a Surge, and I could never carry one, even in my satchel. The thing is a brick with pliers in.
I completely agree with this. The Skeletool is perfect for backpacking, climbing, cycling, etc where you want a full sized pliers, multiple drivers and minimal weight. I also agree that the Surge is just too big. I like the large flat driver, but that's about it. Everything else can be done with a Charge or Wave with significant weight/size savings.
I agree with this as well. I got my Skeletool CX when they were first released, and it has been one of my primary EDC tools ever since. :)
the Surge is a well-designed tool, and I want to like it, but like Jothra said, it's a brick. anytime I want to use a heavy-duty tool for home/yard projects, I find myself going with the ST300 instead. (it's almost 3 oz. lighter.)
and I agree with Nikola about the SOG MTs -- pliers are awesome, everything else is meh. :-\ the most-used tools on a multi for me are the main blade and drivers, and SOG's just don't cut it. (bad pun alert!)
-
I'm quite surprised how many have found the Swisstool/Spirit and Charge unsuitable for them :o
Less surprised about the Juice, Skeletool and SOG's inboard tools :PYet another example that there is no perfect tool, and that our needs and tastes are so varied

-
About the only MT I have that is a bit of a disappointment is the Gerber Dime.
A few others don't quite live up to the hype, or to other peoples opinions, but that little Gerber just feels cheap and nasty. Like Robert said, it's not good when the real thing feels like a fake.
I still carry it now and then but only on occasions when I doubt I'll be needing anything serious.
-
I was disappointed by the Dime because people said it was a good Gerber. I was expecting it to have quirks, like the funny sticking out bottle opener and I was expecting the rubbish file. I wasn't expecting to not be able to open the tools, and even when loosened off a bit the tools to come out in such a horrible clunky way. I was prepared to have to touch up the blade but was surprised at the quantity of filings that came off it.
I tried to like it, I carried it a few times instead of my Squirt but I just couldn't. I took it to work and left it on my desk for box opening duties but found myself just using the Wave I had on me instead. So it's now in my MT box tried to learn how to be a decent MT from all its big buddies ;)
-
One that I decided just wasn't for is the Crunch. I got my hands on one of the "tribute" MTs and, while the quality is not that of a real Leatherman, it did let me find out that I have almost no use for that particular selection of tools.

-
@50ft-trad said:
I'm quite surprised how many have found the Swisstool/Spirit and Charge unsuitable for them :o
Less surprised about the Juice, Skeletool and SOG's inboard tools :PYet another example that there is no perfect tool, and that our needs and tastes are so varied

Well said.

I shake my head in disbelief every time I hear someone say they don't like the Wave/Charge, but I realize that I probably cause a similar reaction when others see that I don't like there Swisstool/Spirit. :)
Thankfully, we have a wide selection to choose from... to each their own.

-
Periodically, I start to think I'm missing something by not having/carrying a Wave, since they seem so incredibly popular. And I have to give LM credit for being perhaps the only manufacturer to (sometimes) pull off the feat of putting OH blades on a pliers-based MT without ruining the ergonomics, sacrificing the other tools, or both. Then I go to my local store to handle one. After playing with it for a while, I realize I have no real use (or desire, anymore) for it, so I hand it back to the nice salesperson, and go on my way. Until the next time the urge strikes...
-
@nate j said:
Periodically, I start to think I'm missing something by not having/carrying a Wave, since they seem so incredibly popular. And I have to give LM credit for being perhaps the only manufacturer to (sometimes) pull off the feat of putting OH blades on a pliers-based MT without ruining the ergonomics, sacrificing the other tools, or both. Then I go to my local store to handle one. After playing with it for a while, I realize I have no real use (or desire, anymore) for it, so I hand it back to the nice salesperson, and go on my way. Until the next time the urge strikes...Just curious, what was off putting about the Wave and which multitool do you currently use?
-
I think the Wave just doesn't really fit any of my identified MT needs.
One of those needs is EDC, but at 8.5 oz, the Wave is heavier than I care to tote around all the time. Also, I only occasionally find myself in need of pliers or wire cutters. I always carry a SAK (three layers or less) and a pocketwrench II, often add a OH locking knife (liking the Spydercos ATM), and or sometimes add a LM Squirt. TBH, though, I have to admit that most days I could probably get by fine with just the SAK.
The other need is emergency kits. Weight is less of a consideration here, but I definitely want the most bombproof MT I can find, preferably with a large/diverse tool set. My current choice for this service is the Swisstool. Were I a die-hard LM fan, the nod would most certainly go to the Surge or ST300 over the Wave for this duty.
-
The ST300. I have a Wave and I think I am just spoiled by the outside opening blades. The ST has a habit of pulling my pants down too. Not a deal breaker, but I'm sure I look silly pulling my pants up every few steps. :D
-
Gerbers , SOG's , some Leatherman's ( ST300 , Surge , Juices ) . I like the Vic Spirit , the Swisstool isn't for me . As far as SAK's go , all have merits , but many aren't my cup of tea . The Rambler is a cool little unit , the others not so much ! In 91 mm's , I prefer those with lots of implements , like my Handyman . A 91 mm without the loadout , is like a football bat .
Chris
-
OK, probably the most popular tool I don't like is:
LM Micra
Never liked the squirt on paper, but when I held it (a PS4) in my hand i quite liked it (and I still do), so I thought I probably would like the Micra too. Boy was I wrong. Nailfile and Knife are OK, the screwdrivers are barely OK (but considering the size they are actually OK, though no match for a Vic combo-tool). The tweezers are utterly rubbish and the saddest part are the scissors. One would expect a MT based on scissors would at least shine at that, but with their overbite they lack precision and they are clunky like children's scissors. To top it all off the design of the micra is awful / hideous / ugly. It lacks the compactness of the squirt.
Sorry, between a Alox Rambler (or MiniChamp) and the Squirt PS4, there is simply no room for a micra. To me, an utterly pointless tool. -
I only bought it recently, but I'm quite disappointed in the Rebar.
I had read "good things" about it and bought one planning to use it for work EDC,
BUT it's not "convenient" enough to do the job.My most used tool is the knife and with "inside tools" the Rebar is just too slow to access a blade.
I have actually gone and bought a second hand Wave to ride with me at work and will use the Rebar as my motorcycle carry tool either in the tank-bag on the Ducati or in my Camelback when I go dirt-biking. -
All multipliers, brand doesn't matter. A cheap $2 pair of slip joint pliers will out do most MP's, why? They open wider and cost $2!
After my LM failed to get some bathroom work done I gave up on MPs, moved over to a cheap slip joint pair and haven't had a problem since...
As another poster has said, anything expensive. I like paying for quality, but not name recognition...
-
I'm with Nate on the Wave thing. It was a great tool. It was just too big and heavy for my realistic needs.
I had the Wave and the Spirit, and not a lot of free funds for other things, so one of them had to go. In all truth and reality, the Spirit ALSO is more than i'm ever likely to need, but I really think, considering how much I occasionally regret getting rid of the Wave, that if i got rid of the Spirit, I'd just end up getting another one.
I have a ST 300 and... man... no need for it at all.
I have a love/hate relationship with the Juice line. Perfect scale, for my needs, but SO many things done wrong.
I am pretty dead sure I hate the Vic 91mm plier.
I simply do not like the Gerber MP400 line, and I have to assume the 600s, etc. Don't dig that sliding plier design, which means the Leatherman OHO is probably also out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login