Key chain Drivers DIY
-
-
I went and bought 2 audio jacks last night. 8 need the epoxy still though
Sent from my SPH-L720 using Tapatalk 2
Nice cant wait to see :)
Please dont get normal epoxy, it not only takes longer but is very messy as well
@Nhoj said:
I want to do this but I'm pretty sure I feel too lazy today. :)When ever you want :)
They're very quick. My 1st one (the black philips) took about 15 to 20 minThe others only took 5 to 10 min
Sent using Tapatalk -
Jph0200,
So, I made my drivers, and tweeked your instructions a little.
I added a a washer that would fit inside the audio Jack sleeve, but not fit out the back.
Had to remove some of the inner stands to get the paracord through the washer. Also had to use an inner stand to get the bite of the cord through the washer.
Today at the flea market one guy was selling really strong magnets cheap. When I say strong, I mean strong. Rare earth strong
I bought 16x 1/4 Magnets and 3x 3/8
For $4I put one on the back of each bit, now they are magnetic. The lady picture shows how magnetic. Once the epoxy sets, I will see how much it can hold
Them I used a 1/4 inch compression sleeve from the plumbing section as a bead
Sent from my SPH-L720 using Tapatalk 2




-
So, I made my drivers, and tweeked your instructions a little.
I added a a washer that would fit inside the audio Jack sleeve, but not fit out the back.
Had to remove some of the inner stands to get the paracord through the washer. Also had to use an inner stand to get the bite of the cord through the washer.
Today at the flea market one guy was selling really strong magnets cheap. When I say strong, I mean strong. Rare earth strong
I bought 16x 1/4 Magnets and 3x 3/8
For $4I put one on the back of each bit, now they are magnetic. The lady picture shows how magnetic. Once the epoxy sets, I will see how much it can hold
Them I used a 1/4 inch compression sleeve from the plumbing section as a bead
Sent from my SPH-L720 using Tapatalk 2
Now THAT'S thinking!
-
Jph0200,
So, I made my drivers, and tweeked your instructions a little.
I added a a washer that would fit inside the audio Jack sleeve, but not fit out the back.
Had to remove some of the inner stands to get the paracord through the washer. Also had to use an inner stand to get the bite of the cord through the washer.
Today at the flea market one guy was selling really strong magnets cheap. When I say strong, I mean strong. Rare earth strong
I bought 16x 1/4 Magnets and 3x 3/8
For $4I put one on the back of each bit, now they are magnetic. The lady picture shows how magnetic. Once the epoxy sets, I will see how much it can hold
Them I used a 1/4 inch compression sleeve from the plumbing section as a bead
Sent from my SPH-L720 using Tapatalk 2
Now THAT'S thinking!
Metro,
You have no idea how much that means coming from you

-
So, I made my drivers, and tweeked your instructions a little.
I added a a washer that would fit inside the audio Jack sleeve, but not fit out the back.
Had to remove some of the inner stands to get the paracord through the washer. Also had to use an inner stand to get the bite of the cord through the washer.
Today at the flea market one guy was selling really strong magnets cheap. When I say strong, I mean strong. Rare earth strong
I bought 16x 1/4 Magnets and 3x 3/8
For $4I put one on the back of each bit, now they are magnetic. The lady picture shows how magnetic. Once the epoxy sets, I will see how much it can hold
Them I used a 1/4 inch compression sleeve from the plumbing section as a bead
Sent from my SPH-L720 using Tapatalk 2
Kudos Detron Awesome job! 
I'm gonna try this when I get home :D
-
I am going back to the flea market in hopes of getting more magnets. His process are a steal!
Sent from my SPH-L720 using Tapatalk 2
-
Lots of cleverness in this thread


-
Busy making my magnetized one.
I'm going try make the bit removable so put less epoxy in the jack and letting the magnet set in 1st.Will see how it goes :)
-
@detron said:
Sweet! I to have been trying to solve the removable bit issue, no firm solution yetSent from my SPH-L720 using Tapatalk 2
Got it right (Idea I tried before didn't work)
Wasn't sure how at 1st, but eventually decided to take a change, take a bit holder and cut the back off with a hack saw

Used your idea of putting a washer by the paracordThe rest is pretty much the same as before.

Put some epoxy in the jack cover and shoved the cut bit holder inFinished Result


-
Sweet! I to have been trying to solve the removable bit issue, no firm solution yet
Sent from my SPH-L720 using Tapatalk 2
Got it right (Idea I tried before didn't work)
Wasn't sure how at 1st, but eventually decided to take a change, take a bit holder and cut the back off with a hack saw

Used your idea of putting a washer by the paracordThe rest is pretty much the same as before.

Put some epoxy in the jack cover and shoved the cut bit holder inFinished Result


Love it!
Sent from my SPH-L720 using Tapatalk 2
-

I love following the progression of this mods. Clever thinking going on around here.

-
-
Very nice mod, I like the latest design even better than the first! Thanks to this, I now know what to do with wasted audio jacks in the future. :D

-
Thanks guys.
:tu .It started with Detron's mod. Did the same but coated the back of the bit with oil and pulled it out the epoxy
Worked well but I could see the epoxy would not last. (bit got wedged after 1st hard use)That's when I decide to try the bit holder above:)
@comis said:
Very nice mod, I like the latest design even better than the first! Thanks to this, I now know what to do with wasted audio jacks in the future. :D
Thanks!:D
That's how I started. I use to do sound Engineering and built a collection from repairs
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

