Whats the hook for?
-
@50ft-trad said:
Which all seems fine until you actually use it, and then there's not enough thread to hold it in again afterwards
:D :DJust being an arse ;)
That is absolutely true (the pin part, not the arse part)—but when you have five minutes to sew the back of your pants up before recess is over, you don't stop to worry about how well your needle fits under your hook. Well, I didn't. That class still talks about it, and I haven't seen them in a year.
Like most weird SAK tricks, it's really the world's most opinioney opinion call. My SAK also has a small firesteel, tinder, a sharpening rod, and several glasses screws secreted throughout. I may be a tad biased about cramming stuff into weird places in SAKs.
-
@Jothra said:
My SAK also has a small firesteel, tinder, a sharpening rod, and several glasses screws secreted throughout. I may be a tad biased about cramming stuff into weird places in SAKs.Jothra,
Would you mind sharing a quick picture of the SAK that has the firesteel attached? Is it similar to the one that was made by SwissBianco sometime ago?

In light of firesteel and SAK/MT, I did put out a video about that just a day or two ago. :)
</topic/46954 -
I was thinking about this problem and had an idea. Must try it to see if it works, though. Get a thin plastic straw and cut it to fit under the hook. Put the threaded needle inside. f you use the thread, you still have the same bulk from the straw, it won't fall out so easily.
What do you think? -
@pfrsantos said:
I was thinking about this problem and had an idea. Must try it to see if it works, though. Get a thin plastic straw and cut it to fit under the hook. Put the threaded needle inside. f you use the thread, you still have the same bulk from the straw, it won't fall out so easily.
What do you think?That could work. I used some headphone wire insulation to keep the glasses screws from falling out of the scissor layer of the Forester I used to carry. Straw could fit really nicely under the hook.
Off-topic: my ferro rod is tiny. It fits under the scissors, and is held in by waxed cottonball tinder. I strike it with the back of the saw, which seems to generate more sparks than any of the other tools.
-
I was thinking about this problem and had an idea. Must try it to see if it works, though. Get a thin plastic straw and cut it to fit under the hook. Put the threaded needle inside. f you use the thread, you still have the same bulk from the straw, it won't fall out so easily.
What do you think?That could work. I used some headphone wire insulation to keep the glasses screws from falling out of the **scissor layer of the Forester **I used to carry. Straw could fit really nicely under the hook.
Off-topic: my ferro rod is tiny. It fits under the scissors, and is held in by waxed cottonball tinder. I strike it with the back of the saw, which seems to generate more sparks than any of the other tools.
Is that a mod? My 111mm Forrester has no scissors...
??? -
Oops. Saw layer.
-
I knew it...

-
For hooks with no file area....
I used double-sided Carpet Tape to attach a small strip of 400 grit paper. Works well enough in a pinch to smooth a jagged nail etc. I glued mine to the invisible side of the hook.
-
The hook could also be used to expose and lift the vas deferens when performing a vasectomy :-)
Rich
-
Steinar -
I think you would do better (better full explanation and pics) of how to do a vasectomy by
Googling it. Assuming you have scissors and a needle and thread in your SAK, you have all the tools
needed to do one. I don't recommend it as a do-it yourself project however.Rich
-
The hook saved my bacon once. Take a look at this:

and then read this: </post/618198>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
