Victorinox Spartan Lite initial impressions
-
Here’s a list of its implements (reference www.victorinox.com):
- Large Blade
- Small Blade
- Corkscrew
- Can Opener with
- Small Screwdriver (also for Phillips screws)
- Bottle Opener with
- Large Screwdriver
- Wire Stripper
- Reamer
- Key Ring
- Tweezers
- Toothpick
- Patented Mini-screwdriver
- LED White Light
- Phillips Screwdriver
The Spartan Lite adds a LED light, a Phillips screwdriver, and a mini-screwdriver to the Spartan pattern.
Like many of you, I was fond of the original Spartan pattern—it was small enough to go unnoticed in a pocket but contained many of the most essential tools… except a proper Phillips screwdriver.
Although Phillips drivers are commonly found on other Swiss army knife patterns, the driver on the Spartan Lite is not the traditional style. On traditional patterns, the Phillips driver is located on the bottom of the knife (in place of the corkscrew) and extends toward the middle of the handle. Because of its location, the driver requires a lot of clearance and won’t reach tight spaces. The Phillips driver on the Spartan Lite extends from the end of the handle, increasing its reach. One drawback of this design is that the Key Ring can get in the way when using the Phillips driver.

-
The 3-layer Spartan Lite is the thinnest current production Swiss army knife to use this style of Phillips driver The thinner 2-layer Scientist had a similar driver but the pattern is discontinued and somewhat rare.
The head of the Phillips driver is different than the driver on traditional patterns. Not quite a standard #1 or #2 Phillips, it is unique.

-
The Phillips driver on the Spartan Lite is similar in design to the driver on the SwissTools.

-
Although it fits most of the Phillips head screws that I’ve tried, the rounded edges of the Phillips head make it more prone to slipping in comparison to standard bits.
Letting no space go to waste, Victorinox also incorporated a mini-screwdriver that is stored in the corkscrew. The design is pure genius and works well for the small screws found on eyeglasses and electronic cases.


-
The LED light (or is it lite?) is somewhat of a disappointment. The light is quite dim compared to keychain-type LED lights. But it provides sufficient illumination of nearby objects (key holes, etc.).

-
The light is actuated by either pushing a red switch for momentary operation or sliding the switch to lock the light in the ON position. The light uses two 3V lithium CR1225 watch batteries which are included. The battery compartment swings out of the handle and the door of the battery compartment unsnaps without requiring any tools.


-
The knife blades and other implements are typical Victorinox quality and I don’t think it’s necessary to comment on them.
Overall I’m very pleased with this Swiss army knife.
(+)
Excellent fit and finish (typical of Victorinox)
Compact but contains a good selection of tools
Phillips driver has good reach(-)
Phillips driver is more prone to slipping
Key Ring gets in the way when using the Phillips driver
Weak LED light -
Muchos kudos on an a great review supratentorial! Well written and with excellent pictures throughout! Very nice.
Strange that I never considered before how much more useful the phillips screwdriver would be on the end of the knife, as compared to where it usually is in the middle. I'm not much up to speed on SAK developement; how long has the Spartan Lite (and the Scientist before it) had this Phillips arrangement?
-
Thanks! I don't know the release dates of the Spartan Lite or the Scientist but the Scientist was discontinued in the late 1980's if I recall correctly.

-
Okay, so tell me about those ruby scales. Do they tend get scratched up and "cloudy" easily? (I'm thinking of the translucent plastic handle covers on the Leatherman Juice tools here.....)
-
I'll have to let you know since this is my first with translucent covers. Perhaps someone else can offer more information. I actually prefer the aesthetics of the opaque red covers on my other knives. I imagine that the translucent covers will show off every scratch and particle of dirt. I think replacement covers can be ordered from an authorized dealer and if the translucent covers get ugly I may eventually replace the covers with opaque red ones.
-
Translucent scales do indeed show wear much faster than the standard scales, and that's the main reason I avoid them. I don't mind a tool that looks used, but the translucent scales just look too crappy too fast.
I would however like to add this thread to SOSAKOnline so others can see and read your thoughts, if you don't mind?
Def
-
By the way, anyone else notice the flashlight looks an awful lot like a piggy?
Def
-
I think that is the first in there new line of Piggy tools
-
At least they had the decency to make the light shine from the <u>front</u> end of the piggy. :P
-
ok
@Nightshade said:
Supratentorial, how far from the electric panelboard was the light? Excellent and thorough review too.Thanks!
The entire compartment from the far edge of the second battery to the edge of the light (double ended arrow in photo) is about an inch and a half long. The cover for the light (asterisk in photo) is not designed to be removable but there doesn't appear to be a panel board. It appears to be a rather simple design. One of the LED wires makes constant contact with one battery ("1" in photo) and the other wire makes contact with the other battery ("2" in photo) when the switch is pushed or locked in the ON position. The switch moves a red lever downward, pushing the wire against the battery (see single ended arrows in photo).
I'm not sure but it looks like the LED might be replaced by straightening the wires and pushing the LED out of it's housing. I just bought it though so I'll want to wait for some of the new-knife-feeling to wear off before I start taking it apart.

-
@Nightshade said:
Supratentorial, how far from the electric panelboard was the light? Excellent and thorough review too.Did he mean how far away from the electrical circuit breaker box was the knife light? In that one picture at the beginning of the thread?
-
Damn nice job of editing that battery compartment picture though!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login