Computer repair kits.
-
I used to have a great kit like that Belkin one when I lived in Canada, and stupidly left it behind (my cousin inherited it) and it had all the tools I needed. I really could do with a similar toolbox as I have parts (especially screws etc) all over the place and very disorganized.
-
I keep a workbench in my basement along with a couple of plastic tubs for hard drives, cables, various ram sticks, dvd burner or two, etc. and a Craftsman screwdriver/wrench set for tools. I also have a monitor sitting on a shelf to use if needed.
Every so often, I go thru my stuff and post some on Craigslist to down size, which I need to do as I am getting too much stuff. :D
-
What? No cat5 crimping tool? :ahhh
:P
Nicely organised.

Mine's all over the place, I have 3 boxes full of different cables, power/cat5/telephone/video, screws and adapters, ... I actually threw away lots of stuff a few weeks ago when we had a old electronical devices disposal thing going on here. Mostly 10-15+ years old components that I had stored for years for whatever reason.
AMD Am386, AM486 stuff.I'll try do do a proper pictorial some time next week.

-
I keep all my excess in 2 big brown boxes. My future build is in one, extra parts in another.
come to think about it I have enough parts to slap together a dual core micro atx......hmmmm
-
I also have crap everywhere, but my actual toolkit is somewhat organized.
pics come laterI do have like 8 boxes of Cat-5e each a 1000'.
I also have some tools I made myself such as simple loopback plugs. they are great for basic testing of cable runs. I go to a room that has say 15 network drops that is going to house a new group of people and is currently empty. , I look at the switch and count any lights that are already on, then I put a loopback plug in each drop and go to the switch and see if the number of lights is now 15 higher. if not I go take out say 5 and check again, and test like that until I find any problems. it is quicker that testeing each one properly, and once I do find problems, once I fix them I do test properly. I also have T1, and ISDN loopbacks.
yep, I will have to take some pictures.
-
Hey! I just got a Cable Dawg...does that count? :B:
-
At one time I actually knew how to sort the wires and crimp Cat 5, but it's been long forgotten. :(
-
That's what the internet is for...
I have a crimper still, but rarely use it. I prefer wired to Wi-FiSent from my Nexus 7 using Tapatalk 4
-
@jzmtl said:
At one time I actually knew how to sort the wires and crimp Cat 5, but it's been long forgotten. :(If it's for personal use for your home network, who cares. :P Just make sure the wires are in the same order on both sides and it will work for hooking up the computer or your IPTV box to the router.
-
At one time I actually knew how to sort the wires and crimp Cat 5, but it's been long forgotten. :(
If it's for personal use for your home network, who cares. :P Just make sure the wires are in the same order on both sides and it will work for hooking up the computer or your IPTV box to the router.
That is true, but be careful. That will suck if you find a cut Cable and you have to fix it, especially if you cannot get to the other to investigate the color order.
There are nice Android apps that also show the pin outs for loads of connections.
At home it does not matter, but on a big job site it does matter. You will notice that each pair of wires has a different twist tightness. This is to help with interference. I will add more info about this one I am at a computer again
Sent from my SPH-L720 using Tapatalk 2
-
I have an app called electrodroid
Sent from my Nexus 4 using Tapatalk 4
-
That's why I said for home networks. ;) Looking forward to more info though.

And Electrodroid now installed.

-
As promised
CAT 5, CAT 5e, CAT 6 Cable all have 4 pairs of 2 wires that are twisted together along the entire length of the cable.
The purpose of twisting the wires is to try an eliminate a tendency for the signal of a wire to interfere with the wire next to it. The act of twisting these wires makes it more difficult for this to occur. This physical property is the entire basis for the broad scope describing this type of cable: Twisted Pair.
Laboratory research proved that by varying the degree of twist between pairs within the same cable, the tendency for signal interference, known as cross talk, could be even further reduced. This twist variance is known as the twist ratio.
One of the major improvements that was made to CAT 5e Cable over CAT 5 Cable, was the change in twist ratio between the pairs. The problem of cross talk was significantly reduced, and as a result the cable is also able to handle a much greater workload than its predecessor.
Source http://www.cat-5-cable-company.com/faq-cat5-pair-differences.html
-
Loopback plugs can be helpful for doing quick tests where the link LED is conformation of connection.
at this site, near the bottom where it says full-loopback https://sites.google.com/site/kalman/tech-break/ethernetrj-45loopback
this will work with the 100 meg as well as Gigabit.
If you want to have fun at the expense of others, unplug their network cable, and plug this in, Windows will report the cable is plugged in.

these simple loopbacks have made my life much easier.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login