And so it begins.... (My adventures into Alox!)
-
I can only second that - He is an outstanding craftsman - If not by trade so at least by passion - and a really nice guy.
He sent me some Pivots and 2 drill bits a while back and I finally have an old Alox knife to try them on... -
@Syph007 said:
If you want I can hook you up with a modding kit. You need pivots and also a carbide bit for the holes. You must have a drill press though, it's a requirement to use the bits I have. Ive been using ball nose carbide milling bits to drill the holes, and the parts must be clamped and drilled at precise perpendicular angles, with plenty of oil. The bits are $10 each, and the pivots with screws are $2 each. International shipping for that would be $6.Cheers,
RobertI thank you very much for your very kind offer,
I appreciate that the problem is the shipping .. if you send from canada may never come!
I'm having big problems with the Italian customs.
I already have the drill press (the tips I own are in millimeters not inches, so if the pivot are in inches should I look for a tip from 1/8)
however I can see some pictures of the tools that I've described to understand better?thank you very much
-
If you want I can hook you up with a modding kit. You need pivots and also a carbide bit for the holes. You must have a drill press though, it's a requirement to use the bits I have. Ive been using ball nose carbide milling bits to drill the holes, and the parts must be clamped and drilled at precise perpendicular angles, with plenty of oil. The bits are $10 each, and the pivots with screws are $2 each. International shipping for that would be $6.
Cheers,
RobertI thank you very much for your very kind offer,
I appreciate that the problem is the shipping .. if you send from canada may never come!
I'm having big problems with the Italian customs.
I already have the drill press (the tips I own are in millimeters not inches, so if the pivot are in inches should I look for a tip from 1/8)
however I can see some pictures of the tools that I've described to understand better?thank you very much
Ive shipped to Italy more times than I care to think and have yet to have one missing :)
-
If you want I can hook you up with a modding kit. You need pivots and also a carbide bit for the holes. You must have a drill press though, it's a requirement to use the bits I have. Ive been using ball nose carbide milling bits to drill the holes, and the parts must be clamped and drilled at precise perpendicular angles, with plenty of oil. The bits are $10 each, and the pivots with screws are $2 each. International shipping for that would be $6.
Cheers,
RobertI thank you very much for your very kind offer,
I appreciate that the problem is the shipping .. if you send from canada may never come!
I'm having big problems with the Italian customs.
I already have the drill press (the tips I own are in millimeters not inches, so if the pivot are in inches should I look for a tip from 1/8)
however I can see some pictures of the tools that I've described to understand better?thank you very much
Any 1/8 carbide bit will work. These are what I have been using.

I figured on your side of the ocean imperial sizes would be hard to come by. Ive sent 2 things to italy before and they made it. But I always asked the reciever if they had any problems getting packages and both said no issues. Do you have lots of issues with packages not showing up?
I just ordered another 200 pivots today, so I will have lots on hand. I get them at a decent rate with a big order, even though shipping is still alot for me, still $32 to ship those to Canada.
-
ouch! $ 32 to ship it's too much!
ok, let's see if they arrive in Italy.
the pivot and screws are these?
http://www.knifekits.com/vcom/product_info.php?cPath=60_83&products_id=471
http://www.knifekits.com/vcom/product_info.php?cPath=60_81_230&products_id=1248maybe you can send me a pair of these?

maybe we continue pm
-
Next on the bench is another deployment of the fat 154cm blades I had made up.
I was trying a fit up with the phillips/opener layer, and scissors. It works but the cap lifter nail nick is pretty much blocked. I might just go with the standard opener layer on one side and scissors on the other. That would still leave a pretty decent EDC super SAK.





Its funny, when I first got these blades, the sheepsfoot style was my least favorite. Now I think its just awesome and wish I had more. Its so nice and easy to pinch grip it open, and it makes a significant snap noise since its so wide and heavy.
Stay tuned! :D
-
Wow, that's fearing HUGE! Nice.. JR
-
Yeah, that fat blade is very cool

-
Holy bejebus! That's a huge blade!
-
That's not a SAK blade, this is a SAK blade! :D

-
very nice Syph, very nice

-
Well I had to do my least favorite task this week.. liner making. When you want to add layers to alox SAKs it becomes a necessary evil as I buy pioneer and add layers, I would always be short one stock liner if I didnt make my own.
I took a few pics along the way but my process hasnt changed much since the begining except now I use my mill to rough out the liners instead of a sander.
The steps are
- Trace liner outlines on 1 sq foot of material
- Drill all holes.
- Cut out liners with jewlers saw, very rough, just to separate them
- Make a liner sandwich of 20 and clamp in vice and use mill to remove most of the material
- Make liner sandwich with stock liners and 6 rough liners and use router to finish edges
- Polish and enjoy, or anodize. :D







I have about 4 solid days into making about 40 brass and 40 aluminum liners. This will keep me going for awhile though. The aluminum will get polished and sent for hard anodize and the brass will get polished as they get used.

-
Really? regular woodworking router? What router bit are u using please?
-
-
Thanks Syph... That makes sense... Maybe I'll try it, need 2 brass liners to mod one of your mods... ;)
-
I really love this one.

It needed brass liners which is what started me making all the liners this week. Blue and brass really does look nice. :D




I love this blade! This is the thickest spring I ever made too at 0.155". A plier spring is 0.125".



Cheers!
-
:o
What a monster blade.

Will you be ordering any more of these 154cm blades?
-
What a beauty
Did you make the backspring for that blade?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login