And so it begins.... (My adventures into Alox!)
-
Holy bejebus! That's a huge blade!
-
That's not a SAK blade, this is a SAK blade! :D

-
very nice Syph, very nice

-
Well I had to do my least favorite task this week.. liner making. When you want to add layers to alox SAKs it becomes a necessary evil as I buy pioneer and add layers, I would always be short one stock liner if I didnt make my own.
I took a few pics along the way but my process hasnt changed much since the begining except now I use my mill to rough out the liners instead of a sander.
The steps are
- Trace liner outlines on 1 sq foot of material
- Drill all holes.
- Cut out liners with jewlers saw, very rough, just to separate them
- Make a liner sandwich of 20 and clamp in vice and use mill to remove most of the material
- Make liner sandwich with stock liners and 6 rough liners and use router to finish edges
- Polish and enjoy, or anodize. :D







I have about 4 solid days into making about 40 brass and 40 aluminum liners. This will keep me going for awhile though. The aluminum will get polished and sent for hard anodize and the brass will get polished as they get used.

-
Really? regular woodworking router? What router bit are u using please?
-
-
Thanks Syph... That makes sense... Maybe I'll try it, need 2 brass liners to mod one of your mods... ;)
-
I really love this one.

It needed brass liners which is what started me making all the liners this week. Blue and brass really does look nice. :D




I love this blade! This is the thickest spring I ever made too at 0.155". A plier spring is 0.125".



Cheers!
-
:o
What a monster blade.

Will you be ordering any more of these 154cm blades?
-
What a beauty
Did you make the backspring for that blade? -
As the famous ninja turtle Michelangelo would say "This is EPIC!!"
Sent from my iPhone 5 using Tapatalk
-
What a monster blade.

Will you be ordering any more of these 154cm blades?
Im going to do my own grinding. Ironically in custom knife making I've done all the parts except actually making blades so I gotta do that, its been bugging me that I havent yet.
I gotta plug the guy that I did the trade with though. His name is Paul Cooper. If anyone needs his contact info for custom blade grinding give me a shout.
Ive been practicing on my little grinder and its going ok. I have blade steel on the way, and Im trying to pick out a good grinder now. I still have that damascus to turn into blades too, but I dont want to learn on that. :D
-
@sawman said:
What a beauty
Did you make the backspring for that blade?When I had the scissors backsprings originally made they were 0.155 thick, but I had them surface ground to 0.100. I left about 20 raw that were full thickness. This was from one of those. I had to change the profile a bit to work with this blade, but once tweaked it fit like a glove.
-
Syph that blade kicks all kinds of butt:))
Sent from my XT901 using Tapatalk 2
-
That is just.....whhhhhoooooaaaaaaaaa

-
Well here is a first for me... a 93mm with ... a fish scaler! :D I even surface ground down a spring to 0.060" to work perfectly with it. Very thin layer. To give you some perspective, the pliers layer in a swiss champ has liners that are 0.050" thick.
This one also has the seldom requested natural hard anodize which is a matte gray color. It works really well with red liners.





Cheers :D
-
Nice one!
I really like those scales. Do you have any more left? -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
