Knife design
-
[quote author=jekostas link=topic=47904.msg789442#msg789442 date=1382293185]
Have you thought about angling the blade slightly up similar to the Kershaw Needs Work? It makes it much easier to use the entire blade length on flat surfaces.Links or pics of what you mean please :)
I think Jekostas was meaning something like this?
Looking forward to see how this turns out

That looks ok but I like the design I have made. I don't understand the purpose of angling the blade though ???
It raises your knuckles up out of the way, for example if you were cutting stuff on a chopping board
[/quote]
Ahh I see. Thanks but I think I'll keep it as is :) -

Just to add I have liked the TT blade since JA posted his pictures


-
Steve, are you left of right handed?
I ask cause you say you are going for a kiridashi style edge/chisel ground. I ask cause the real kiridashis are sharpened on the other side as opposed to the western style blades. Gives you the ability to get closer to the object you're cutting. The western manufacturers sharpen the blades on the wrong side cause it looks cooler in the pictures. ::)
Left handed on top, right handed on the bottom.
-
@enki_ck said:
Steve, are you left of right handed?I ask cause you say you are going for a kiridashi style edge/chisel ground. I ask cause the real kiridashis are sharpened on the other side as opposed to the western style blades. Gives you the ability to get closer to the object you're cutting. The western manufacturers sharpen the blades on the wrong side cause it looks cooler in the pictures. ::)
Left handed on top, right handed on the bottom.
Good point ;). Maybe just a standard flat grind then. Hmmm decisions decisions.
-
The wood knife will be easy to sharpen but I dont think it will hold an edge long.

-
Cause that's also the other word for donkey. :D
-
@enki_ck said:
Cause that's also the other word for donkey. :DYup Im a smartdonkey!
Steve how are you going to do stock removal? I really want to get a good belt grinder someday when I learn to make blades but Im not there yet. I have a small 1x30 I use for shaping parts, but it wouldnt be the greatest for blade making. Im still afraid to cut up the damascus I have.
I was toying with making fixtures and milling off the stock but I dont know about that either.

-
Cause that's also the other word for donkey. :D
Yup Im a smartdonkey!
Steve how are you going to do stock removal? I really want to get a good belt grinder someday when I learn to make blades but Im not there yet. I have a small 1x30 I use for shaping parts, but it wouldnt be the greatest for blade making. Im still afraid to cut up the damascus I have.
I was toying with making fixtures and milling off the stock but I dont know about that either.

Grind, file, and hack my way through it. Also my work has a BIG bandsaw ;). Maybe they will let me use it.
-
Take that Damascus to work and cut it out.
I bet its some tough stuff to work with.
-
Design has been transferred to the steel. The only other change will be holes to mount the handle material, in this case, black carbon fiber and some black chain mail screws. Maybe a small pry tip on the end.
-
Take it slow and easy and it will cut. Don't force it. Use a newer sharp blade.
have a tub of water close by and dunk it during cutting so it doesn't get overheated.
it might be tough to tell if your burning it or not because of the color of the Damascus.
I've never worked with it.
-
@tattoosteve99 said:
Design has been transferred to the steel. The only other change will be holes to mount the handle material, in this case, black carbon fiber and some black chain mail screws. Maybe a small pry tip on the end.
-
@enki_ck said:
Steve, are you left of right handed?I ask cause you say you are going for a kiridashi style edge/chisel ground. I ask cause the real kiridashis are sharpened on the other side as opposed to the western style blades. Gives you the ability to get closer to the object you're cutting. The western manufacturers sharpen the blades on the wrong side cause it looks cooler in the pictures. ::)
Left handed on top, right handed on the bottom.
Thanks I always wondered why they sharpen them on the wrong side.
-
Here's an update. Took it to work today and rough cut it.

Then ground some more :D

I haven't decided how long to make it yet so I'm playing it by ear.
-
Looks good man.
-
This is going to turn out great!
-
I'm going to cut the blade down some it's too fat. Then it will be better fitting in the hand.
-
@tattoosteve99 said:
I'm going to cut the blade down some it's too fat. Then it will be better fitting in the hand.Like this


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login