Knife design
-
Design has been transferred to the steel. The only other change will be holes to mount the handle material, in this case, black carbon fiber and some black chain mail screws. Maybe a small pry tip on the end.
-
Take it slow and easy and it will cut. Don't force it. Use a newer sharp blade.
have a tub of water close by and dunk it during cutting so it doesn't get overheated.
it might be tough to tell if your burning it or not because of the color of the Damascus.
I've never worked with it.
-
@tattoosteve99 said:
Design has been transferred to the steel. The only other change will be holes to mount the handle material, in this case, black carbon fiber and some black chain mail screws. Maybe a small pry tip on the end.
-
@enki_ck said:
Steve, are you left of right handed?I ask cause you say you are going for a kiridashi style edge/chisel ground. I ask cause the real kiridashis are sharpened on the other side as opposed to the western style blades. Gives you the ability to get closer to the object you're cutting. The western manufacturers sharpen the blades on the wrong side cause it looks cooler in the pictures. ::)
Left handed on top, right handed on the bottom.
Thanks I always wondered why they sharpen them on the wrong side.
-
Here's an update. Took it to work today and rough cut it.

Then ground some more :D

I haven't decided how long to make it yet so I'm playing it by ear.
-
Looks good man.
-
This is going to turn out great!
-
I'm going to cut the blade down some it's too fat. Then it will be better fitting in the hand.
-
@tattoosteve99 said:
I'm going to cut the blade down some it's too fat. Then it will be better fitting in the hand.Like this


-
@tattoosteve99 said:
I'm going to cut the blade down some it's too fat. Then it will be better fitting in the hand.Please don't. You will turn it into a "knuckle dragger". I had a knife with similar proportions and I gave it away. I got tired of the sore and scraped knuckles. If anything, follow the advice previously given and reprofile to angle the handle up a bit.
Sent from my iPad2
-
Not really a problem unless it's going to be used on cutting board.
-
Not really a problem unless it's going to be used on cutting board.
Nope it's more of a just in case knife. It will be strapped to my EDC bag mostly.
LOL Steve - I'm just tryin' to envision that scenario for us Brits. Fact is I doubt if our feet would touch the ground if the plod were to catch us wandering around with that strapped on!
"Don't be alarmed officer, its simply a part of my EDC bag"

:_c:P.S looking good

-
Not really a problem unless it's going to be used on cutting board.
Nope it's more of a just in case knife. It will be strapped to my EDC bag mostly.
LOL Steve - I'm just tryin' to envision that scenario for us Brits. Fact is I doubt if our feet would touch the ground if the plod were to catch us wandering around with that strapped on!
"Don't be alarmed officer, its simply a part of my EDC bag"

:_c:P.S looking good

Which is why I still live in the USA ;)

I have a few police friends and most of them just ask me "another knife Steve? Really? " let's see this one
Most people that know me around here know me as the knife and flashlight guy. -
Great project you have going. I like the design so far

-
Almost there :)

I have one more slight angle to grind on the back near the handle. Then time for the bevel. It's looking better that I thought it ever would :).
-
How thick is it? And how do you plan to grind it?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login