What did you use your Leatherman for today?
-
Opened some boxes and bags at work this morning with the Skeletool. The boxes were stapled underneath the tape
Skeletool pliers used to remove heavy staples.Used the Supertool 300 today to clean a neglected weld gun nozzle, trim weld wire and chip/file a welded assembly.
Used the Crunch to hold together a few pieces of steel for welding. Got some weld berries on the Crunch. Used Supertool file to clean Crunch!
-
We had a ton of boxes to open for new inventory at the shop today. Mostly new decanter and glasses sets. A couple boxes had cigars in them but not as many as I would have liked to see. Used the heck out of my Juice Pro, Oppie 8 & Wenger Zino this evening.
-
It's 8:00am in the morning!

-
-
It's 8:00am in the morning!

No it's 0900.
Sent from my iPhone 5 using Tapatalk
In Ontario it's 8:04.
-
Is this the random thoughts thread?¿? :P
Oh and it's 1233 here in Texas

-
@stealth007s said:
**Is this the random thoughts thread?¿? :P **Oh and it's 1233 here in Texas

No.

-
**Is this the random thoughts thread?¿? :P **
Oh and it's 1233 here in Texas

No.

i used my leatherman to type this.

-
**Is this the random thoughts thread?¿? :P **
Oh and it's 1233 here in Texas

No.

i used my leatherman to type this.


-
Although packing Skeletool, Crunch and Supertool 300, it was all about the ST300 today.
I spray painted a tool I made yesterday. When changing paint bottles, the dip tube fell in a full bottle and I used the ST300 pliers to get in the narrow mouth and rescue the dip tube. I also used it to peel a lid off a new bottle of air tool oil.
Got a call later in the day; machinist crashed CNC machine, broken tooling. I went to assess and used ST300 pliers to remove razor-sharp metal shavings after determining we would have to remove the tooling and bring it back to the shop. The tooling was old, and not doweled in place, so I used the ST300 awl to scribe the X/Y footprint before removal.
Back in the shop, I used ST300 awl to "pop" the quick disconnect fitting to bleed off residual hydraulic pressure and then used the pliers to disassemble some of the broken pieces.
-
It was all about real tools today at work; I was installing a tooling project I had finished earlier in the week, and my tool bag at work has all the fixings. I think I cut a zip-tie with ST300, just for fun, because my Wave never cut them cleanly.
I got home and used the Crunch to reinstall some siding that was damaged over the summer when a young exterminator clumsily peeled it off to deal with a wasp nest in our garage. He offered to reinstall, which I let him do. Big mistake. I guess he has never heard of a nail-set, and my siding has big hammer marks all over it where he put it back up.
The Crunch was great for pulling out bent nails, especially ones that had snapped off nail heads! >:(Also used the Wave pliers to quarter-up a fire starter for my woodstove.
After witnessing the action of the exterminator, in true DIY nature, next time I'm buying the bee-suit and doing it myself! I was surprised to find them locally for less than $120, which is cheaper than any exterminator around.
-
**Is this the random thoughts thread?¿? :P **
Oh and it's 1233 here in Texas

No.

i used my leatherman to type this.


Hilarious!

-
@Craiger said:
After witnessing the action of the exterminator, in true DIY nature, **next time I'm buying the bee-suit and doing it myself! **I was surprised to find them locally for less than $120, which is cheaper than any exterminator around.Might be worth doing some research on the pesticides you intend to use before starting. I believe some can be pretty toxic and need special handling during use and disposing of used dispensers etc. ???
-
That's part of the surprise.... No pesticide required for wasp removal. He just suited up, pried off the siding, removed the nest and put it in a trash bag. I was amazed that the wasps, while a bit agitated, were not really going after him all that much.
Once the queen is gone, workers continue to return to the nest for a few days, but eventually leave and die after they realize the queen and nest are gone. And, wasps tend not to re-inhabit a previous nest location, or the nest location of a former colony (they are territorial from what I understand).
-
Now it's 8:54 in the morning!

-
My fiancé's diamond necklace chain broke right at the little female end of the clasp, one of the gold chain links broke. I used my Wave's wire cutters to cut one of the other links, put the female end of the clasp on that link and pinched the link shut. My Wave saved the day, she's happy and I'm happy I don't need to buy another $600 necklace.

-
I had to use my Charge TTi and bit kit and extender today, which is a rare occurrence. I was disassembling a baby swing that we no longer need, but couldn't find the Allen key that came with it. So I thought of my bit kit and checked a couple of the hex bits and found one that fit. I attached the bit extender (didn't really need it, but figured why not?) and the hex bit and proceeded to complete the tasks. Unfortunately I wasn't able to take any pics

-
My Pulse saw a fair amount of use today. I used the diamond file to polish a very tight tolerance set of parts to size after I machined them, they are .375" OD .314" ID ring spacers that are .050" wide with only + or - .0005" tolerance. Yes, 5 ten-thousandths of an inch either way.
I used the pliers to remove a few burrs off these spacers, the part-off tool leaves a heck of a burr.
-
The Fuse had a good day. Checked the mowers air cleaner,spark plug,throttle adjustment and fuel filter. Opened up some beers. Tightened up the back gates latch and turn buckle. Loosened upthe tension spring on the gate as well. Sliced open the mail and a new bag of dog food. Changed some batteries in a few of my sons toys. To end the day ive been making lanyard knot key fobs with the Fuses needle nose pliers to snug up the knots. :D Go Fuse
-
I used the pliers in my LM Style PS to straighten a bent Presta valve in my bicycle. I don't know if we are supposed to unbent them but it seemed to be very awkward...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login