What did you use your Leatherman for today?
-
New member, quick update :)
Wave: On vacation after quite a few years EDC.

Skeletool: Opening boxes at work, opening a drink at a Halloween party.
Supertool 300: Bending wire handles for my wife's cooking basket, carving a pumpkin with the saw and awl, removing air filter from my truck, opening a can of beans, removing the foil from an antifreeze bottle, scraping weld slag with the pliers.
Crunch: Removing battery cables on my truck, assembling some tooling fixtures, holding a tooling component while grinding, stripping some wires, fixing my wife's apple-coring machine (had to hold a small, bendable part with the Crunch, and hold the Crunch in a vise to do some precision dremel work) and of course, practicing one-hand deployment/retraction!

-
Almost forgot the tool-on-tool tales:
Used Supertool 300 pliers to bend Crunch lower-jaw friction-fit pivot so the Crunch wouldn't "fall apart" as easily when released.
After the pumpkin carving party, my new Supertool 300 developed a loose pivot from all the pumpkin guts. Used Crunch pliers/pin vise to tighten Supertool pivot back to the sweet spot.
-
Just used the mini screwdriver on my Wave to tighten my eyeglasses and sunglasses, and also to pry the scales off of one of my Swiss Army Knives.
-
Retightened the rear brake cable on my bike (note to self: order the bit extender for easier access :D)
-
At least 3 times a week I use a Leatherman to cut strings off of clothing...i'm a stickler for cutting strings off clothing.
-
Used my Rebar for some Phillips screws.
-
Opened some boxes and bags at work this morning with the Skeletool. The boxes were stapled underneath the tape
Skeletool pliers used to remove heavy staples.Used the Supertool 300 today to clean a neglected weld gun nozzle, trim weld wire and chip/file a welded assembly.
Used the Crunch to hold together a few pieces of steel for welding. Got some weld berries on the Crunch. Used Supertool file to clean Crunch!
-
We had a ton of boxes to open for new inventory at the shop today. Mostly new decanter and glasses sets. A couple boxes had cigars in them but not as many as I would have liked to see. Used the heck out of my Juice Pro, Oppie 8 & Wenger Zino this evening.
-
It's 8:00am in the morning!

-
-
It's 8:00am in the morning!

No it's 0900.
Sent from my iPhone 5 using Tapatalk
In Ontario it's 8:04.
-
Is this the random thoughts thread?¿? :P
Oh and it's 1233 here in Texas

-
@stealth007s said:
**Is this the random thoughts thread?¿? :P **Oh and it's 1233 here in Texas

No.

-
**Is this the random thoughts thread?¿? :P **
Oh and it's 1233 here in Texas

No.

i used my leatherman to type this.

-
**Is this the random thoughts thread?¿? :P **
Oh and it's 1233 here in Texas

No.

i used my leatherman to type this.


-
Although packing Skeletool, Crunch and Supertool 300, it was all about the ST300 today.
I spray painted a tool I made yesterday. When changing paint bottles, the dip tube fell in a full bottle and I used the ST300 pliers to get in the narrow mouth and rescue the dip tube. I also used it to peel a lid off a new bottle of air tool oil.
Got a call later in the day; machinist crashed CNC machine, broken tooling. I went to assess and used ST300 pliers to remove razor-sharp metal shavings after determining we would have to remove the tooling and bring it back to the shop. The tooling was old, and not doweled in place, so I used the ST300 awl to scribe the X/Y footprint before removal.
Back in the shop, I used ST300 awl to "pop" the quick disconnect fitting to bleed off residual hydraulic pressure and then used the pliers to disassemble some of the broken pieces.
-
It was all about real tools today at work; I was installing a tooling project I had finished earlier in the week, and my tool bag at work has all the fixings. I think I cut a zip-tie with ST300, just for fun, because my Wave never cut them cleanly.
I got home and used the Crunch to reinstall some siding that was damaged over the summer when a young exterminator clumsily peeled it off to deal with a wasp nest in our garage. He offered to reinstall, which I let him do. Big mistake. I guess he has never heard of a nail-set, and my siding has big hammer marks all over it where he put it back up.
The Crunch was great for pulling out bent nails, especially ones that had snapped off nail heads! >:(Also used the Wave pliers to quarter-up a fire starter for my woodstove.
After witnessing the action of the exterminator, in true DIY nature, next time I'm buying the bee-suit and doing it myself! I was surprised to find them locally for less than $120, which is cheaper than any exterminator around.
-
**Is this the random thoughts thread?¿? :P **
Oh and it's 1233 here in Texas

No.

i used my leatherman to type this.


Hilarious!

-
@Craiger said:
After witnessing the action of the exterminator, in true DIY nature, **next time I'm buying the bee-suit and doing it myself! **I was surprised to find them locally for less than $120, which is cheaper than any exterminator around.Might be worth doing some research on the pesticides you intend to use before starting. I believe some can be pretty toxic and need special handling during use and disposing of used dispensers etc. ???
-
That's part of the surprise.... No pesticide required for wasp removal. He just suited up, pried off the siding, removed the nest and put it in a trash bag. I was amazed that the wasps, while a bit agitated, were not really going after him all that much.
Once the queen is gone, workers continue to return to the nest for a few days, but eventually leave and die after they realize the queen and nest are gone. And, wasps tend not to re-inhabit a previous nest location, or the nest location of a former colony (they are territorial from what I understand).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login