Waiter Alox
-
@Syph007 said:
Someone tried that before remember and it didnt work out. I cant remember who now
, but he just gave up after trying a few times to have some made.Yes, I saw the thread - the difference in my case is I would be doing them myself. I need to get tooled up to do it so I was wondering if I could recoup my costs by sharing the love. ;)
Ha. Yes, it is much, much harder. Beyond my facilities/skills.
@Syph007 said:
That is so tiny Id want to build a SAK and stress test it to see if it held up ok.I would agree if it was hollow rod, but with an A2 stainless screw in a threaded rod the brass is really just acting as a collar and the torsional strength is actually coming from the screw rather than the brass. I suspect a solid (rather than hollow) 2.2mm rod would be adequate (it looks like that is what used as factory fit). Brass is good for pivots due to its 'self lubricating' properties (I suspect you already know this).
-
If you could get pivots made in the 2.2mm and 2.5mm sizes, you'd blow the modding community wide open for sure.
(BTW, peening on alox isn't all that difficult. Peening in general is a tedious job, but not difficult. I have more headaches drilling alox rivets apart than I do pinning them back together.)
-
I received a legitimate quote to make the barrels in 303 stainless. It was $1000 though so I couldn't swing it sadly. It would have been a huge order though.
-
Have done a bit of googling over the weekend I see there's commercially available 2.5mm brass tube with an ID of 1.6mm which would be ideal to be tapped to an M2 thread and then ground down to 2.2mm (could be done on a dremel or a variable speed drill). There is also 2.2mm brass rod fairly easily available. It is cheap so I've ordered some to play with. I think it should work OK but will wait and see before I suggest it.
Am I missing something though - I thought it would be harder to source these materials in these dimensions given the number of posts about them?
-
A 2.2 pin with M2 threading sounds a bit flimsy for my taste.
-
@crackout said:
A 2.2 pin with M2 threading sounds a bit flimsy for my taste.@Peso said:
I would agree if it was hollow rod, but with an A2 stainless screw in a threaded rod the brass is really just acting as a collar and the torsional strength is actually coming from the screw rather than the brass. I suspect a solid (rather than hollow) 2.2mm rod would be adequate (it looks like that is what used as factory fit).I'll see when it turns up. An issue I'm currently forseeing is getting short enough screws given a single layer tool is only about 6mm wide/thick.
-
You can always shorten screws.
-
I'm going to have to - the shortest I can find is 3mm. It will be getting enough bite on the threads that might be an issue. Should know one way or the other by the weekend ???
-
you probably already know this, but if you do shorten a screw make sure you slip a nut on it first, makes life a lot easier later.
-
@crackout said:
A 2.2 pin with M2 threading sounds a bit flimsy for my taste.Quite right too! All went well on Sunday afternoon except making up a bloody pivot. The 2.5mm one I made for the corskcrew is fine but you are right a 2.2mm with an M2 thread isn't.
I reckon I have 2 options:
- drill the tools to 2.5mm holes
- buy a Wenger Classic 63 and use the tools from that
Now, I prefer the combo tool on the Wenger's anyway so buying one would actually not be that much of a bind as was toying with the idea anyway. However, will the combo tool, spring and blade fit in the Vic Alox body?
BW,
Mike -
If you have a good bit and drill press, drilling all the holes out to 2.5mm is a fast process. I drill out a SAKs worth of parts and have them ready to go in probably 15-20 minutes. Drill holes with carbide bit, debur, polish inside and make sure they move freely on pivot.
-
Thanks Syph,
The parts shouldn't be a problem (it is only 3 holes) - any tips on the washer and keyring spacer - I can see them being a PITA to hold in the vice?
Peso
-
The parts shouldn't be a problem (it is only 3 holes) - any tips on the washer and keyring spacer - I can see them being a PITA to hold in the vice?
Peso
I make new washers, but to drill the existing one ya I can see it would be tough to hold. The kerying spacer I just made an impression of it in wood and hold it tight in that and drill.
-
It's finished. Pics in the morning.
-
So, here we go. Happy with the result. Nice and 'snappy' once played around with the torque of the screws. Not scratched although this was very much an exercise in function over style. Apologies for pic quality, can't find the macro camera.
<a href="http://s173.photobucket.com/user/mikeclem_photos/media/IMG_20131215_115024.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i173.photobucket.com/albums/w56/mikeclem_photos/IMG_20131215_115024.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Now the backside. Corskcrew cut out not quite perfect (the curve is wrong) but see above:
<a href="http://s173.photobucket.com/user/mikeclem_photos/media/IMG_20131215_115140.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i173.photobucket.com/albums/w56/mikeclem_photos/IMG_20131215_115140.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Countersunk the rear corkscrew screw a little too far but this is the only real thing I think could have been done better:
<a href="http://s173.photobucket.com/user/mikeclem_photos/media/IMG_20131215_115148.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i173.photobucket.com/albums/w56/mikeclem_photos/IMG_20131215_115148.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>The floating '4th pin':
<a href="http://s173.photobucket.com/user/mikeclem_photos/media/IMG_20131215_115311.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i173.photobucket.com/albums/w56/mikeclem_photos/IMG_20131215_115311.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>And finally, proudly part of my keychaing EDC:
<a href="http://s173.photobucket.com/user/mikeclem_photos/media/IMG_20131215_115414.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i173.photobucket.com/albums/w56/mikeclem_photos/IMG_20131215_115414.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Nice work! -
very keen!
-
very well done congratulations!
-
Many thanks - esp. Syph - very useful hints and tips made the process far simpler.
Do any of you threadlock the screws? Playing around today I've noticed they are coming a bit loose. I've no intention of taking it apart again except maybe for maintenance.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login