Knife re-handling project.
-
Cheers :) just a shame you won't see that bit once its all together!! Well not directly anyway, if it wasn't flat you'd see the effects....
-
This is true :) Can't wait for the rest of the bits to arrive so i can see what its actually gonna look like!!
-
Oh so nothing too vital then :D
-
Nah not at all :D
-
Haven't decided yet, i'll see how the knife goes then think about the sheath.
-
here's a tip I found for a guide for your slabs/scales when your first setting them ;
Clamp a "file" guide onto your knife blank at the ricasso. Use this file guide to line up that perfectly squared end
of the handle scales to exactly where you want it. If you're using a guard, do it first, before doing the handle scales.
Put the guard (if your using one) against the file guide. Once the two guards are on the scale, you can take the
file guide off and use the back ends of the guard (again if your using one) for your guide for the handle scales.after you've epoxied and set them on with pins and they are cured completely, you can take off the file guide.
The fronts of your handle scales will be perfectly aligned every time,using this method! -
you may already now this but I thought it was a very interesting "temp jig" instead of "eye-balling"
or guessing exactly where they should be in case they move while setting them on and during curing :)
I have a whole page I saved for doing this, that's just a part. -
Sounds interesting, you got a link to that page per chance? :)
A few more pics of the second blanks transmogrification:



-
unfortunately not, it was a thread (somewhere, probably BF) and I just copied
several posts/tips, I can give you the whole thing in a private if you want!and them scales are coming out nice!
-
Cheers WD :) (both for the comments and the pm ;) )
-
np! I hope it can help (the word wrap may be off, sorry but I'm sure you can correct it)
to me any little tip would be useful and they had some nice ones, glad I could pass it
along
-
Well i've taken the rough saw marks off both sides of both blanks now, took a bit of elbow grease but it's done :) Think i picked the right side of the blanks too, the grain is much nicer on the outside than the inside! :) Can't really do much now though without a blade :( Which should hopefully be here on monday!
-
man that wood is nice enough to put on the side of my car! :D
-
Got my first surprise in this project so far, the liner material.....not what i was expecting at all! Its not a bad thing i was just expecting it to be quite floppy but its quite rigid. It does however go well with the walnut, glad i got black not red though :)
-
@micky d said:
Good call on the split, was thinking it was a bit off topic :D
As for custom scaled SAK's, i doubt my work would be half as good as the more experienced lot, so i'll probably just leave it to them! Not saying i wouldn't give it a go though....if some one wants to lend me one to practice on.....
Yeah, I'll just send you one of Ben's mate...he's got that faux boned handled 108 hasn't he, I'm sure you'd love to put a bit of wood on that :D
You leave my SAK alone!! >:D >:D
Knife seems to be coming on real nice Ryan. :) Can't wait to see the finished result.
-
Aww, but it would look so much better with some wood on :D
Can't wait for the blade to arrive so i can start making it properly!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login