Any Jeepers out there?
-
snip
It's also all turns, so I had to do some of it in 2wd! :DExcuse my ignorance about Jeeps, but can't you have 4WD and still turn? I come from a world of Land Rovers which you can't put in 2WD. Your options are High Range or Low Range, 4WD or 4WD with a locked centre diff. I wouldn't want to use a locked centre diff on the road because you'd end up tying the transmission in knots.
I know in our tractors you need to turn off diff locks to turn sensibly but the options I have in them are 2WD, 4WD, 4WD with all 3 diffs locked. You can't drive round corners in the last one :D You get a good range of options, you can set them so that at low speeds in a straight line you get everything locked up, with the diffs unlocking when you speed up or try to steer, and the 4WD kicking off once you get up to road speeds.
Haha, yes you can :D I put it in 2wd so it was easier to go around the turns sideways.

The transfer case on my Jeep has 2wd - 4 Part time (locked centre diff) - 4 Full time (open centre diff) - Neutral - 4 Low.
Ah, in that case you should be able to have it in 4WD and still have steering if you can run without locked diffs.
In a Land Rover (stock Defender at least) you can't lock the front and back diffs, only the centre one. I think your Jeeps might have one up on it there :D
I don't have front or rear locking diffs, and actually the only Jeep that comes with them (I believe, might be wrong) is the the Rubicon model of the Wrangler. I'm also not sure if the Wranglers can switch between open/locked centre diff or not. Def??
I wouldn't mind having selectable lockers front and rear, but to be honest, where I've wheeled I don't really need them.
edit You could also get varilock axles for my Jeep. They're not lockable, but they send the power to which ever tire has the most grip.
-
I don't think there is such an option, but then you are getting further into the mechanical bits than I usually venture so I could be wrong.
The current Rubicon only differs from the Sahara and Sport models by having aand electronic sway bar disconnect and 4:10 gearing in the rear end. I have 3:78 gears in the back end of mine and that is the upgrade from the standard 3:11 most Wranglers have.
Def
Sent from a digital multitool
-
-
I take it you managed that five minute commute ok? :P
Def
Sent from a digital multitool
-
-
We aren't that bad in the city, although we do have a lot more things to run into so I guess it evens out!
Def
Sent from a digital multitool
-
Went on an amazing run today, easily one of the best I've been on!! I broke a tail light when I slid into a tree, but that was the only damage I did to my rig. Here are a few pics, not all are mine.
Here's a couple of links to a few more:
http://myp.nikonimagespace.com/myphoto/guest.jsp?y=oe9-eRCitKpfz31-g7HY8uJBFtZT1zWjhJwNn7LA8dmyq7qKxlIDz9ViLYe_5gewiHx3-Ruq3DXOs5uogtiznjcJmZqVUNAiCGRCy7-x7Johttp://www.backcountry4x4club.ca/forums/topic/4345-dec-2013-mystery-run-big-jones/
-
That looks like a lot of fun!
Def
Sent from a digital multitool
-
It snowed in the mountains, at last, but my plans were ruined as all the roads to the mountains were closed by the police for being too dangerous... They are bored with people overestimating their cars and getting stuck every year.... Maybe next week.
I did go through some muddy puddles though. -
If any Canadians need a D-Ring receiver, Princess Auto has on on sale for $9.99 starting tomorrow. These are usually close to $40.
http://www.princessauto.com/pal/en/Pintle-Hooks/10000-lb-Hitch-Receiver-D-Ring/8518003.p

-
That's not a bad deal- the D Rings are usually $12-15 on their own.
Def
-
Merry Christmas friends!
I've stopped using my D-ring hitch. Hangs too low for me. Now I just put the pin through the loop of my tug strap and throw the strap in the back and close the tail gate on it. No messing around when you need it.
Keep Calm and Jeep On
-
Replaced the track bar today, too freakin cold to do it myself so took it to a garage. $100 parts plus $200 labor. ::)
Think I'm getting too old for this, time to look for a regular car.
@derekmac said:
If any Canadians need a D-Ring receiver, Princess Auto has on on sale for $9.99 starting tomorrow. These are usually close to $40.I remember people were saying don't use these, the hitch pins aren't made to take shock load encountered in recovery.
-
@Grant Lamontagne said:
Here is Whoey driving my yellow Jeep a few nights ago!
:D
It's been sitting for a while so the battery needed some charging which is why my green Jeep is in the background.
Def
Looking forward to next time, and hopefully an actual drive in it instead of maneuvering around your driveway in a snowstorm :P
-
@Grant Lamontagne said:
The four door actually isn't as nice in the winter as the two door as the long wheelbase puts the rear wheels pretty far away from the weight of the engine. It is however better for back seat passengers, more comfortable to drive and has a lot better cargo space. Visibility also suffers majorly in the 4 door, but that is also because the JK/JKU has smaller windows than the TJ had. Overall they are tough to compare as they are radically different trucks, even though they are the same model.Speaking of Whoey and comparing my Jeeps, he brought me a neat Jeep related item that I have been after for a while- The Alternator version of the Autobot called Hound.
This version of Hound is one of the two Transformers actually endorsed by Jeep and is modeled after the TJ. I was amazed at the detail, as the interior is better than many model kits I have looked at over the years! Here's what I mean.
This is Hound in Jeep mode:
Note that it actually looks like a Jeep TJ, as opposed to the other attempts to make non trademark infringing Transformer Jeeps in the past.
Original Hound:

Anyways, getting back to the detail, here are some interior shots:
You can't really see it in these rough shots, but Hound is actually a 5 speed version, complete with center console, hand brake, dual cup holders and an accurate dash layout- the speedo, tachometer, vents, grab handles and environmental controls are just about perfect.

The engine bay isn't as closely matched to the original, but is pretty cool anyway as they went to some effort to make it look good.
The other neat thing is the fully functional suspension.
You can see that I forgot to close the hood completely, but trust me, it does close. :P
Anyways, this is a pretty cool toy to represent my old Jeep (TJ) and my new one (military green) all in one! Or I could just tell people that I like Jie so much that I had to get a model of his Jeep! :D
Def
There are three Alternators, now you have Hound, you knew Swindle was the yellow one, but there is also a red one named Rollbar:

-
Luckily I don't have a red Jeep, nor is there one on the horizon!
Def
Sent from a digital multitool
-
well you may not need Rollbar, but I think you definitely need Swindle now...
-
Absolutely.
When are you coming down next?
-
-
That looks a lot better than the taped up lights you see a lot of people running with!
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


















