What did you use your Leatherman for today?
-
Again, welcome knobcreekman! I'd say you gave that Wave a proper breaking in. The Wave is an excellent tool, one of my favorites.

-
Used my Style PS scissors again yesterday evening, to remove some loos threads from the tablecloth.
That nifty little style is a pleasure and handy thing to have with you when a big lm would not be so socially accepted ,like with the christmas dinner.
(Also here in the netherlands it is not so common to have a big kind of tool like a lm wave or surge with you on a daily base, alltough i mostly do carry my wave in my skinth with me, and really cant count anymore how many times i used a ziptie (or2) to save the day for someone.(zip ties can replace broken jeans buttons, shoe laces, keep a muffler under the car from dangling on the ground, and be used to pull up a light hanging to low to let the band play under it.(so dont carry only your lm, but also a 15cm ziptie or 2!)
-
@LanWolf said:
Used my Style PS scissors again yesterday evening, to remove some loos threads from the tablecloth.That nifty little style is a pleasure and handy thing to have with you when a big lm would not be so socially accepted ,like with the christmas dinner.
(Also here in the netherlands it is not so common to have a big kind of tool like a lm wave or surge with you on a daily base, alltough i mostly do carry my wave in my skinth with me, and really cant count anymore how many times i used a ziptie (or2) to save the day for someone.(zip ties can replace broken jeans buttons, shoe laces, keep a muffler under the car from dangling on the ground, and be used to pull up a light hanging to low to let the band play under it.(so dont carry only your lm, but also a 15cm ziptie or 2!)
I do think it depends a bit on where you are, or what you're doing... I think, hearing others here on the forum, it seems us Dutchies are pretty free, both for the laws, and what people think of you, when carrying a multitool. :)
-
I used my Wingman's pliers to squeeze/bend a piece of metal on a coworker's traction thingies on her shoes. I have no idea what they were, but they're to help get extra traction on slippery ground. Anyway, the end of one of the metal coil type things wrapped around part of the apparatus was bent out and catching on the carpet at work. She asked if I had pliers and of course I did, so I fixed it for her

-
I got the ST300 for Christmas & immediately put it to work, opening boxes & freeing toys for my boys from the prison that is the packaging in this day and age. Yesterday, I opened a ps3 game package & tightened light switch & outlet plates in a freshly painted room!
-
Welcome, jrod.
Glad you enjoy your new ST300. 
-
I cut some loose string on my blankets with the Skeletool's wire cutters.
-
I used my Rebar to tighten a cabinet's door handle.
-
Used my modded wave to adjust my bow while shooting some targets. Then used it to adjust the scope on my 30-06.
-
I used the Sidekick's pliers to pull a small nail out of the wall a bit. I nailed it in too far and the hammer claw couldn't grab it.
Sent from my XT901 using Tapatalk
-
Also used the PS4's file as a nail file, pliers to pull a couple staples from the back of a picture frame, and the Phillips to tighten the little fasteners that hold the back of the frame on.
Sent from my XT901 using Tapatalk
-
Today I used my Wave to disassemble to top vent on my Komodo Smoker and then reassemble it.
I used my ST 300 to repair the faucet on my kitchen. -
Used the lm screwdriver extension with the smallest philips to install some new batteries in the wooden christmashouses. (And used the can opener on the lm to pry out the old batteries.
-
Used my juice to get some of the decorations down


-
I used my Wingman today to fix a couple desk calculators that were jammed up pretty good with paper. I used the combo opener and pliers.
-
Used my Wingman to undo the screws of the kitchen range hood to get at the light, and the Surge to bend one of the metal corners back as it was bent, then used my Brewzer to pop out the light metal collar and plastic cover off to get to the light bulb...
-
Used the saw on my wave to cut a big hole in a double layer of dry wall. Used the plyers to bend the metal tabs on a sprinkler head.
-
Used the pliars on my new Wave to bend and close the ring that attached the fob on my sons keychain.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login