What did you use your Leatherman for today?
-
I cut some loose string on my blankets with the Skeletool's wire cutters.
-
I used my Rebar to tighten a cabinet's door handle.
-
Used my modded wave to adjust my bow while shooting some targets. Then used it to adjust the scope on my 30-06.
-
I used the Sidekick's pliers to pull a small nail out of the wall a bit. I nailed it in too far and the hammer claw couldn't grab it.
Sent from my XT901 using Tapatalk
-
Also used the PS4's file as a nail file, pliers to pull a couple staples from the back of a picture frame, and the Phillips to tighten the little fasteners that hold the back of the frame on.
Sent from my XT901 using Tapatalk
-
Today I used my Wave to disassemble to top vent on my Komodo Smoker and then reassemble it.
I used my ST 300 to repair the faucet on my kitchen. -
Used the lm screwdriver extension with the smallest philips to install some new batteries in the wooden christmashouses. (And used the can opener on the lm to pry out the old batteries.
-
Used my juice to get some of the decorations down


-
I used my Wingman today to fix a couple desk calculators that were jammed up pretty good with paper. I used the combo opener and pliers.
-
Used my Wingman to undo the screws of the kitchen range hood to get at the light, and the Surge to bend one of the metal corners back as it was bent, then used my Brewzer to pop out the light metal collar and plastic cover off to get to the light bulb...
-
Used the saw on my wave to cut a big hole in a double layer of dry wall. Used the plyers to bend the metal tabs on a sprinkler head.
-
Used the pliars on my new Wave to bend and close the ring that attached the fob on my sons keychain.
-
I used my Rebar to open two more Lego Minifigures.

-
I was cutting firewood and while splitting the tree I saw some metal deep inside the tree. I dug it out with my sideclip needle nose and found a bullet from who knows when
-
I used my ST300 to cut the zip tie holding the retractable security cord from a pair of hunting boots, so that I could try them on and then buy them.
Sent from my Nexus 7 using Tapatalk
-
Earlier today I used the Sidekick blade to open up some packages that came today that had my Surge's and Rebar in them!

-
Used my Wingman to pull out staples holding up X-mas lights. Like the way the bigger ridges grip the staples better.
-
I extended the handles on my BO Rebar and deployed the file to use as a backscratcher. This is probably one of the best ideas I've gotten from this place

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Glad you enjoy your new ST300. 