Leatherman Kick pocket clip de-wobble
-
Yeah, they are all like that.. But, you could bend the tab a little or even put a dab of super glue on it.
-
@Leatherman123 said:
Yeah, they are all like that.. But, you could bend the tab a little or even put a dab of super glue on it.Believe it or not I tried both of those things and they both worked a bit - for a while.......
I've an idea though - I'll report back later (if it works).
-
@Spoonrobot said:
Please report back. The loose clip is one of those things that hasn't ever affected me functionally but it is annoying to interact with. Things on multis should be pleasantly tight, not wibbly/wobbly.Sorted! Well sort of.
I started looking at this ages ago, but having a short attention span must have found something more interesting to do.
The problem is, basically that the thickness of the clip is less than the depth of the head of the threaded rivet that the clip screw attaches to, if you see what I mean. So even if you tighten the clip screw up very firmly, the clip itself still rattles about. Like Spoonrobot says wibbly/wobbly.
So, the solution is to pad the clip with a washer so that the clip screw meets it properly. It works!
I've taken a couple of pics of what I just did, but irritatingly, the batteries just died on my camera :-[
When I can power the camera back up - I'll post 'em up so you can see what I'm banging on about.
-
OK, I managed to get enough juice into the camera to download the pictures.
-
In the first picture you can see what I used, and if you look closely, I made a very rough and ready cardboard 'washer'.
-
Put the washer over the collar of the pin that the clip screw fits into.
-
Attach the clip in the normal way.
Now obviously this is a bit crude, but it works really well. The clip still moves, but needs some force exerted to do it. It is no longer wibbly/wobbly!
I'm betting that a small O ring or similar would make for a better (certainly tidier) solution - so I'll look out for one at the hardware store at the weekend.
If you're reading Mr Leatherman - include a washer or O ring with the clips in the future!



-
-
:D
Stellar captioning job and good mod! Let us know what size o-ring works if you find one. I don't have anything suitable in my house to use but I'll look this weekend.
-
Great idea DaveK. Macgyver would be proud.
-
Good post and pic's DaveK,a nylon washer works real good.
-
Kudos on the washer idea DaveK!

-
Topic given its own thread and moved to the Mod Forum. 8)
-
Nice fix!
-
Update!
Well, I was in the local hardware store at the weekend (a brief moment of respite whilst decorating our front room) and couldn't find an O-ring or nylon washer that fitted the bill.
So, the quest is on. I'll try a few more places next weekend and let you know what transpires.
-
How about getting a rod of nylon the right diameter, drill a hole in it, cut a bit off, sand down to the right thickness....."instant" home made washer? It's a thought if you can find a nylon rod that is :)
-
How bout some plastic tubing? the kind of water line for a fridge. You can buy it rather cheap by the foot and can get pretty close to the desired size ;)
-
I must have been lucky. My Kick's pocket clip was tight.
-
Well I found some O-rings that fit the bill, and they work perfectly!
I found that if I tighten the clips too much, then that does reduce the wobble, but there is a trade off as the bottle-opener and crosspoint driver become too tight to open comfortably, so by simply adjusting the tension on the pocket-clip screw, I eventually found a nice balance.
The elasticity in the rubber O-ring means that although the clip can be moved left to right if you force it, it will actually snap back to where you positioned it when released. You could think of the lateral movement as similar to the vertical movement of the clip - i.e. if you get your nail under the end of the clip, pull and release, it snaps back down.
Yup - that'll do for me.
I have used a slightly larger O ring on the BO Kick in the pictures, that's why the clip appears a bit more raised - I'm not sure which I prefer just yet.....
I've added some pics, but they're not very exciting :D


-
Where did you find them and what size, about?
-
Sorry - should have said....
I found a selection of assorted orings in a branch of Maplins (don't know if you have them over there - a bit like radio shack really). Cost me £2.99 ($6) for 225 assorted rings!
Sorry for all you imperialists (?) out there but the measurements in the pictures are all in metric......

-
So thickness-wise, do you prefer the thin paper or the thick o-ring underneath the clip?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login