Question for lock blade users
-
Just another safety feature for when I get a bit reckless or don't really have the possibility to be as mindful of what I'm doing as normally.
Now I'll be the first to admit that in 90% of the cases a SAK or slippie would have been perfectly fine for my EDC. It's that 10% though as I had a close call with a Douk Douk (a reason why I'm thankful for it's mid stop point)
-
Like there's not enough threads mocking me already

-
-
I would prefer a lock blade for safety reasons but am happy with a slipjoint for general edc

-
I see your point Kirky (god help me) I would agree (oh dear) 'I' don't need a lock , nor do I carry one most of the time, because of the laws etc, but I would if it were legal I guess

in a lot of scenarios i'd rather have a fixed blade, but I rarely come up against these in the wilds of populated Kent.
to me, one handed opening is more useful than a lock. But i'd take a lock over non-lock if the choice was there for EDC -
stabbing.... :D
and twisting, digging...
-
I do it for safety reasons and it's totally legal where I'm from so because I can, I'm exercising my right?
-
@kirk13 said:
Fair enough guys,but DOING WHAT?EMPs doing rescue work?
Or?
Mostly where you need the tip and could put some force behind it. In my case it happened while cutting off a zip tie off a steel pipe. Not a whole lot of room, slipped a bit and put too much force on the spine of the knife.
It was user error but the price would be a bit too much -
Fair enough guys,but DOING WHAT?
EMPs doing rescue work?
Or?
Mostly where you need the tip and could put some force behind it. In my case it happened while cutting off a zip tie off a steel pipe. Not a whole lot of room, slipped a bit and put too much force on the spine of the knife.
It was user error but the price would be a bit too muchThanks Styx,THATS the kind of response I was looking for

-
I prefer a locking blade, safety being one reason.
also a linerlock or other blade lock that locks up tight like a fixed blade gives better "feel" to the tool. It's hard to explain but any tradies (tradesmen) out there will understand.. akin to the difference between a cheap chinese made spanner and a Stahlwille or Snap-On tool.
Personally I find the blade of the 93mm Alox knives to be just about the perfect size. now I just need to build a linerlock one... -
@kirk13 said:
Like there's not enough threads mocking me already
You're right, there's not.
:D Just kidding!!For me, I'm generally happy using a slip joint for most cutting duties, but if I'm cutting something where the back of the blade is resting up against something, or cutting at certain angles, I feel much better using something that locks. A locking blade allows you to do slightly dumber cuts.
-
@PTRSAK said:
I prefer a locking blade, safety being one reason.
also a linerlock or other blade lock that locks up tight like a fixed blade gives better "feel" to the tool. It's hard to explain but any tradies (tradesmen) out there will understand.. akin to the difference between a cheap chinese made spanner and a Stahlwille or Snap-On tool.
Personally I find the blade of the 93mm Alox knives to be just about the perfect size. now I just need to build a linerlock one...Ok,that I can understand

@derekmac said:
For me, I'm generally happy using a slip joint for most cutting duties, but if I'm cutting something where the back of the blade is resting up against something, or cutting at certain angles, I feel much better using something that locks. A locking blade allows you to do slightly dumber cuts.That too makes lots of sense

-
Fair enough guys,but DOING WHAT?
EMPs doing rescue work?
Or?
Mostly where you need the tip and could put some force behind it. In my case it happened while cutting off a zip tie off a steel pipe. Not a whole lot of room, slipped a bit and put too much force on the spine of the knife.
It was user error but the price would be a bit too much^^This. I've nearly chopped the end of a finger off with a Kick doing just that.
-
I like em all! Fixed, frame/liner/clasp-lockers, slip joints, and friction folders.

-
@microbe said:
I like em all! Fixed, frame/liner/clasp-lockers, slip joints, and friction folders.
I agree with this as well ^^^
I do like the safety of a locking blade while working especially when pulling the full blade across material say for instance like rope or when exerting pressure in odd angles. I used to use a recruit nearly full time till I got my Wenger S10 and it was this knife that won the right to sit in pocket for work purposes. I think for many reasons fixed blade would be best as I think kitchen knives, hunting knives, sport knives ( fishing, camping ), so a locking blade is the best of both worlds for me. Now that's now to say when I use a locking knife I don't treat it with respect its just a built in layer for me when I using it harder.
-
Well if you want to carry a large blade it makes sense to have a lockblade. An 8 inch blade as a slipjoint would need a crazy strong spring. Easier at that point to have a locking mechanism.
I carry a full size benchmade griptilian and love it. It would be weird as a slipjoint since you cant one hand open them, then. So I guess the answer Im giving you is that its convenient to have a one hand opening blade that locks. It can't be fixed as then its too big to carry the same way, and cant be a slipjoint as it cant be easy one hand open with large resistive spring. A friction folder could be one hand open, but most people arent going to want that.
-
I like the smoothness of the opening vs. most slipjoint knives. Most lockblades also offer one hand opening, which some slipjoints do, but many don't. The added safety of the lock is also comforting when getting in to more intense....um...projects :D
-
@captain spaulding said:
This. Not just for protection from humans but animals as well.I agree completely, in another thread I mentioned a time when I was at the scene of a pitbull attack...
I would additionally suggest that when it comes to any tool, I always try to use the most technologically advanced version of the tool that I am able. I don't use a crank drill to install things on my walls I use a power drill. I don't use a hand saw to cut wood, I use some kind of power saw.
Using a slip joint knife when I can use a locking knife is a step in the wrong direction for me. I understand why people who can't legally carry a locking knife carry what they carry.
Even if I lived in a place where I could carry a gun for defensive purposes I would still carry a locking knife for cutting tasks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login